VALBERG 977617 Refrigerator Freezer Instruction Manual
- June 12, 2024
- VALBERG
Table of Contents
VALBERG 977617 Refrigerator Freezer
Product Information
- Product Name: VALBERG
- Brand: ELECTRO DEPOT
- Warranty: 2 years from the date of purchase
- Warranty Coverage: Manufacturing or material defects
- Warranty Exclusions: Incorrect installation, improper use, abnormal wear
- Manufacturer: MADE IN PRC ELECTRO DEPOT
- Manufacturer Address: 1 route de Vendeville 59155
FACHES-THUMESNIL FRANCE
Preview of the appliance
- LED Light
- Shelves
- Fresh zone
- Crispers
- Leveling Feet
- Balconies
Installation
- Space Requirement: Install the appliance at a location with ambient temperature corresponding to the climate class indicated on the rating plate.
- Positioning: Ensure the plug is easily accessible after installation for disconnecting the appliance from the mains power supply.
Location
The appliance should be installed well away from sources of heat such as
radiators, boilers, direct sunlight etc. Ensure that air can circulate freely
around the back of the cabinet. To ensure best performance, if the appliance
is positioned below an overhanging wall unit, the minimum distance between the
top of the cabinet and the wall unit must be at least 50 mm. Ideally, however,
the appliance should not be positioned below overhanging wall units. Accurate
leveling is ensured by one or more adjustable feet at the base of the cabinet.
This refrigerating appliance is not intended to be used as a built-in
appliance;
Electrical Connection
Please follow the electrical connection instructions provided in the user
manual.
Door Reversibility
To reverse the door, you will need a straight screwdriver, cross screwdriver,
spanner, and the components included in the poly bag.
Please follow the step-by-step instructions provided in the user
manual.
- Remove the upper wire box covers.
- Unscrew right top hinge cover, and disconnect the connectors of door switch and display.
- Unscrew and remove the top hinge, and then remove the door.
- Remove the right aid-closer, and take out left aid-closer from the accessories bag and install it at left side.
- Unscrew the bottom hinge, and remove the adjustable foot from the left side to the right side.
- Unscrew and move the bottom hinge pin from the right side, to the left side, then install the bottom hinge on the left side of the appliance.
- Unscrew and move the top hinge pin from bottom side to upper side. Remove door switch from right hinge cover and then install it in left hinge cover which is placed in the accessory bag.
- Unscrew and move the top decorative cover on the left side, and install it on the right side.
- Detach the Fridge and the Freezer door gaskets and then attach them after rotating.
- install the door, and then move the connecting wires from right side to left side.
- install the top hinge to the left side, please slightly adjust the top hinge while installing to make sure gasket is well sealed.
- Connect connectors of door switch and display, and install the left top hinge cover.
- Install the upper wire box covers to the right side.
Easy open-handle installation
- Remove the screw hole covers.
- Take out the easy open handle which is placed in crisper drawer, and install it.
- Install the easy-open handle covers.
Space Requirement
- Keep enough space of door open.
- It is advisable to keep at least 10mm gap at two sides.
Leveling the unit
- To do this adjust the two leveling feet at front of the unit.
- lf the unit is not level, the doors and magnetic seal alignments will not be covered properly.
Control Panel
User interface introduction
Operation buttons
- FRIDGE Temperature control of the appliance
- SUPER Select and deselect super mode
- ALARM/VACATION Clear door opening alarm, select and deselect vacation mode
- LOCK Locking and unlocking
LED display
- Display window for preset temperature
- Super mode icon
- Vacation mode icon
- Locking and unlocking icon
Illustration of the buttons
All buttons are valid only in unlocking status. Short beep after per touching
of buttons.
FRIDGE: Temperature control of the appliance
Available only for user-defined mode. Follow the methods below to deselect
super mode and vacation mode, and then the user-defined mode is selected.
| Thermostat setting for ambient T°C : NORMAL ≈ +24°C (± 4°C) | 4°C |
|---|---|
| Thermostat setting for ambient T°C : COLD ≈ +16°C (± 4°C) | 4°C |
| Thermostat setting for ambient T°C : HOT ≈ +32°C (± 4°C) | 3°C |
SUPER: Select and deselect super mode
Press the “SUPER” button to select super mode. After 5 seconds flashing of the
super mode icon, super mode is selected.
When the super mode is selected, super mode icon will light on, and display
window will show 2°C.
In super mode, touching the “FRIDGE” button, the super mode icon will flash 3
times, but fridge temperature can not be changed.
To exit Super mode,
- Press the “SUPER” button to deselect Super mode,
- Or after 3 hours of super mode without any operation, the refrigerator will automatically stop it and enter to the previous setting.
WARNING:
In super mode, noise of the appliance may be slightly higher than in normal
running.
ALARM/VACATION: Clear door opening alarm, select and deselect vacation
mode
Short touching the «ALARM/VACATION» button to clear door opening alarm.
Touching the «ALARM/VACATION» button for 3 seconds to select vacation mode.
After 5 seconds flashing of the vacation mode icon, vacation mode is selected.
When vacation mode is selected, the vacation mode icon will light on, and the
display window will show 17°C. In vacation mode, the «FRIDGE» button will not
respond to any touching.
Short-touching the «SUPER» button can exit vacation mode and enter super mode.
Touching the «ALARM/VACATION» button for 3 seconds to deselect vacation mode.
LOCK: Locking and unlocking
Touching the “LOCK” button for 3 seconds to lock the control panel, then the
locking and the unlocking icon will be « ».
In locking status, touch any button, the locking and unlocking icon will flash
3 times.
Touching the “LOCK” button for 3 seconds to unlock the control panel, then the
locking and
unlocking icon will be « ».
In unlocking status, all buttons are available.
If no operation in 25 seconds, the control panel will be locked automatically.
Door opening alarm
If the door keeps opening for 90 seconds, door opening alarm sounds.
Close the door to stop the door-opening alarm.
Or short-touching the “ALARM/VACATION” button to clear door opening alarm. Use
Use
First use
Cleaning the interior
Before using the appliance for the first time, wash the interior and all
internal accessories with lukewarm water and some neutral soap so as to remove
the typical smell of a brand new product then dry thoroughly.
IMPORTANT:
Do not use detergents or abrasive powders, as these will damage the finish.
Daily use
Position different food in different compartments according to be below the
table
Temperature setting recommendation: 4°C is recommended.
Under recommended setting, the best storage time of fridge is no more than 3
days. The best storage time may reduce under other settings.
Accessories
Movable shelves
The walls of the refrigerator are equipped with a series of runners so that
the shelves can be positioned as desired.
Positioning the door balconies
Door balconies can be disassembled for cleaning. To make the disassembling as
follows: gradually pull the balcony in the direction of the arrows until it
comes free, after cleaning, reposition it.
Setting the humidity in the Crisper
Low humidity: move the regulator to the left Hight humidity: move the
regulator to the right
Helpful hints and tips
- It is a household refrigerator, which is suitable for short-term consumption foods storing, such as fruits, vegetables, beverages, etc.
- Do not use it as specialized equipment to store something with strict requirements of temperature, such as medicines, etc.
- Cooked food should be cooled to room temperature before putting into the appliance.
- It is advisable to seal the foods before putting into the appliance.
- Do not place food directly against the air outlet, it may block the air outlet and freeze the food.
Replace the lamp
This product contains a light source of energy efficiency class G.
Light source in this product can only be replaced by qualified professionals.
Please contact after-sales service if the light source fails.
The light source shall be removed at the end of the product’s useful life,
with sorting and recycling done separately.
Cleaning
For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly.
CAUTION:
The appliance may not be connected to the mains during cleaning. Danger of
electrical shock! Before cleaning switch the appliance off and remove the plug
from the mains or switch off or turn out the circuit breaker or fuse. Never
clean the appliance with a steam cleaner. Moisture could accumulate in
electrical components, danger of electrical shock! Hot vapors can lead to
damage of plastic parts. The appliance must be dry before it is placed back
into service.
Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice
or the juice form orange peel, butyric acid, and cleanser that contains acetic
acid.
- Do not allow such substances to come into contact the appliance parts.
- Do not use any abrasive cleaners
- Remove the food from the fridge. Store them in a cool place well covered.
- Switch the appliance off and remove the plug from the mains or switch off or turn out the circuit breaker of fuse.
- Clean the appliance and the interior accessories with a cloth and lukewarm water. After cleaning wipe with fresh water and rub dry.
- After everything is dry place the appliance back into service.
Troubleshooting
IMPORTANT:
Before troubleshooting, disconnect the power supply. Only a qualified
electrician of competent person must do the troubleshooting that is not in
this manual.
There are some sounds during normal use (compressor, refrigerant circulation).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>