ESORUN BIRDGE Smart Wireless Car Mount Instructions

ESORUN BIRDGE Smart Wireless Car Mount

Thanks for choosing the multifunctional smart wireless charging car mount. Please carefully read the instruction man al and precautions before using.

Product Description

How to Use

Step 1:

Fix the air vent clamp or dashboard holder to the device;

Connect the air vent clamp to the device; Insert the ball to the nut firstly and insert to the bolt on the back of device

Screw the nut in clockwise direction

Press the button to unlock the air vent clamp; entry and release to grip the air vent.

Tips

Please match the phone’ s coil to “Wireless charging area” (check the page 2) by adjusting the bottom stand.

Screw the nut on clockwise after finished adjusting the cork base.

Applicable Phone Models (only for reference):

1. Apply to Lumia 1520; Lumia 929; Nexus6 .. .
2. Apply to iphone 8; NexusS; Xperia Xz …… .
3. Apply to iphone X; S7; S8; S9; Note7 ……
4. Apply to iphone 8 plus; S8+; S9+; Notes …
   

Step2:

Use the Type-C cable packed in the box to connect the device and the car charger.

• To achieve fast charging, QC2.0/3.0 car charger is required.
  

Step 3:

Press “Power Button” to power on the device;

Power off the device to save the built in power and prolong the battery cell’s life provided that you would not use the device for long time.

Press Power button for around 3 seconds to power off.

Step 4:

When the phone or other stuff is close to the Device, the arms will open automatically and then close automatically after around 2 seconds later. To avoid any hurt, please make sure your fingers are not in the pathway of arms.

Step 5:

To get the phone out of the Device, simply touch the touching area with your finger (see above).

NOTE: Short touch is a must and enough; Keep your finger on the touching area will not unlock the arms.

NOTE: The Device will try to close before the battery cell used out.

Fits Below Supports (Not Included)
Ball Diameter: 16.8+0.3mm

Product Function Specification

1. Input: 1 2V /1 . 6 7 A; 9V2A; SV /2A
2. Output: 9V / 1.67 A; 9V /1 .1 2A; 9V /0 .83A; SV /1 A
3. Operating Temperature:-10 to 60 °C
4. Charging Power: 1 SW (Max); 1 OW; 7 .SW (for iPhone X/8/8+) and SW.
5. Charging Efficiency: 60% to7S%
6. Charging Distance: up to 6 mm
7. Over Temperature Protection: When charging, if the temperature goes over 60 °C, the device will automatically stop charging and the transmitter light will flash red(one second on/one second off). When the temperature drops to 40 °C, the device will automatically recharge.
8. Over voltage protection: when the Device is working at SW wireless charging, it will automatically stops as soon as the input voltage is over 6V; for 1 OW wireless, the Device stop charging when input is over 1 0V; For 1 SW wireless charging, the Device will stop when the input voltage is over 13V.
9. Support WPC Qi wireless charging protocol.
10.  FOD function: red & blue lights blink.

Product Function- Instruction

1. Automatic induction gesture recognition, no need to manually switch the phone holder. Easy to operate by one hand.
2. Built- in wireless charging transmitter module for mobile phone for wireless charging.

Precautions

• Please carefully handle your charger and accessories, the following recommendations will help you effectively use the warranty service.
• Please keep the equipment dry. Rain, moisture and various liquid may contain minerals that will corrode the circuit. If the equipment is wet, please dry the product as soon as possible or use a soft cloth to wipe it clean. losing the data stored due to demagnetization.
• When charging, please select the regular 5V /2A, 9V /2A chargers. Do not use any damaged chargers.
• Please do not attempt to charge the equipment with battery exposed or case broken, and do not charge the equipment that are incompatible with this product.
• Do not store the equipment in a cold place. Otherwise, if temperature rises to normal temperature, moisture will pent up inside it and damage the electric appliance.
• Do not attempt to open the equipment, unauthorized disassembly or modification will damage equipment or related wireless charging functions.
• Do not throw, tap or shake the equipment; rough handling of the equipment will damage the internal circuit board and the mechanical structure.
• Use the clean and moist soft cloth to clean the surface of the equipment. Do not use or store the equipment in dusty or dirty places.
• Some components of this product are magnetic and metal materials may be adsorbed onto this product. Please do not use bank cards, credit cards or any other items with magnetic near the product so as to avoid losing the data stored due to demagnetization.

Dashboard Holder

Dashboard Holder is with an extendable mechanic arm.which allows the phone can be placed at the optimal charging position, achieving the maximum charging electronics current.

Tips:

1. When using this product, please make sure that the product is connected to the power. To achieve fast charging, QC2.0/3.0 car charger is required.
2. In case this product freezes, touch the Power Button area to activate it.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>