Shenzhen Esorun Technology 2AP2N-QISTAND Foldable Wireless Charging Stand User Manual
- June 5, 2024
- Shenzhen Esorun Technology
Table of Contents
Esorun Technology 2AP2N-QISTAND Foldable
Wireless Charging Stand
User Manual
Accessories:
Wireless transmitter x 1
Type C data cable x 1
User manual x 1
Foldable Wireless Charging Stand
Note:
Thank you for your acquisition of this wireless transmitter, compatible with
all Qi devices like Samsung S7/S7 Edge, S8/S8 Edge, S9/S9 edge, S10/S10 edge,
iPhone 8/8 Plus,
iPhone X, iPhone XR,iPhone XS, iPhoneXS MAX, iPhone 11,iPhone 11 Pro, iPhone
11 Pro MAX For optimum performance and safety, please read this manual
carefully before using this product
SPECIFICATIONS
| Power | 15W/10W/7.5W/5W |
|---|---|
| Input | 5V/2A, 9V/2A,12/1 67A |
| Wireless Output | SV/lA, 9V/0 83A, 9V/l 12A,9V/l 67A |
| Charging Efficiency | 270% |
| Transmission Distance | <8mm |
| Product Size | 137 3 x 69 3xl0 mm |
| Weight | 145g |
PRODUCT STRUCTURE AND COMPOSITION
| Transmitter | Stand |
|---|---|
| Silicone pad | LED |
| LED touch switch | Input port |
HOW TO USE
Charging your wireless transmitter
- Charge your wireless transmitter via included Type C data cable.
- The wireless transmitter is ready for your mobile device.
Charging the mobile device from the wireless transmitter
- Put your mobile device (the phone you used must be able to support the wireless charging or your phone is equipped with a wireless receiver chip).
LED usage
The product is with LED indicator
When powering on and on standby: The light is red
When wireless charging: Light is blue
Tips: When you do not need the light on, you can touch the touch switch on the back of the product to turn off it
When your wireless transmitter working improperly
- Clean the clutters on the wireless transmitter.
- When the wireless transmitter is over-heating, take your mobile device away from your wireless transmitter The transmitter will stop charging automatically when overheating. Please try charging again when the wireless transmitter cooling down.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Operation frequency: 110.256kHz to 147.436kHz
H-filed strength: -8.16dBuA/m@10m
REMARKS
- The charging adapter you used should meet QC2.0, QC3.0, or QC4.0 standards.
- The Type C charging cable you used should be the data cable, not the charging function only.
- It’s normal that this charger and your smartphone will be hot under operating conditions, especially when the phone charging and used at the same time(such as playing music).
- The charging adapter is not included. A charging adapter is required.
- Not works with SV/lA or lower input. For safety, please do not use less than SV/lA input charger or USB port to power up.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Company Name: Shenzhen Esorun Technology Co., Ltd.
Address:425(E02), No. 5 Golf Avenue, Guangpei Community, Guanlan Street,
Longhua District, Shenzhen, China
Anton Clemens Automotive GmbH
Braunsberg 35, D-51429 Bergisch Gladbach, Germany