osily OSDR0500 Digital Electric Radiator Installation Guide
- June 16, 2024
- osily
Table of Contents
DIGITAL ELECTRIC RADIATOR
INSTRUCTION & INSTALLATION GUIDE
SYMBOLS
DANGER. This symbol indicates a medium-high risk hazard which can result in
serious injury or even death.
DO NOT COVER. Do not dry or leave clothes or towels on the radiator. Do not
leave or place magazines, spray cans, volatile substances, or similar objects
within 250 mm of the radiator.
HOT SURFACE. This symbol indicates that your surfaces are hot during and
immediately after use. These must not be touched: danger of burns.
OBSERVE THE INSTRUCTIONS IN THE MANUAL. Please read this manual carefully
before installing and using the product. Keep it for later use. Read all
instructions and safety warnings. Failure to follow these can result in
electric shock, fire or serious injuries.
GENERAL WARNINGS
WARNINGS
This product may be used by children over 8 years of age and by persons with
reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge under strict supervision or instruction in the safe use of the
product and if they understand the hazards involved. Children should not
plug, adjust, clean, play with, or perform maintenance on this product.
Children under 3 years of age should be kept away from this product unless
supervised.
DO NOT use the product in enclosed spaces if the persons present cannot leave
the room independently and are not under constant supervision.
DO NOT COVER.
To avoid overheating, do not cover the radiator.
DO NOT place spray cans, volatile substances, or similar objects within 250mm
of the product.
DO NOT use insecticides, paints, or chemicals on or near the product.
Some parts of this product could reach high temperatures and cause burns. DO
NOT touch the external parts of the product when in operation.
DO NOT install near curtains or other flammable materials.
Particular attention should be paid when children and vulnerable people are
present.
When using electrical appliances, precautions should be taken to reduce the
risk of fire, electric shock and injury.
Never insert fingers, body parts or objects inside the product.
Make sure that the voltage indicated on the product’s technical information
corresponds to the voltage output you have at your socket.
To avoid the risk of suffocation, do not leave the packaging including bags
and other items within reach of babies or children.
The product has an IP24 degree of protection and can be used in bathrooms, but
not in the vicinity of bathtubs, taps, showers, water connections, toilets,
swimming pools or other masses of water. The product must never be installed
where it, the switches or the control panel are within the reach of people in
the water.
Never use the product with wet hands. Do not place any water containers
(glasses, vases, etc.) on or near the product.
!IMPORTANT
Disconnect the product from the power supply and make sure the product is at
room temperature before any cleaning or maintenance. Do not use any abrasive
substances on the product, such as (but not limited to) chemicals, coarse
cloths, brushes, hard bristle, or wire/steel wool.
To disconnect the product from the power source, remove the mains plug from
the socket. Do not pull on the cable.
Before the first start-up, or before the start of winter, or when the product
has not been used for many days, the appliance should be cleaned (follow the
steps in the “maintenance” section of this manual).
Do not sit or lean on the product.
Temperature contrasts can generate “clicks” or noises in the device. This is
not a fault of the product, but due to the expansion/contraction of the
materials.
When disposing of the product, the requirements set out in the legislation for
the waste treatment and recycling must be followed. See WEEE in section 8.
INSTALLATION
We recommend using a trusted installer or electrician for installation of the
product.
IMPORTANT: Prior to installation, please locate the metal tag located at the
back of the product and note the product reference and serial number.
WARNING: Do not install the product directly over an electrical outlet or
junction box. Do not install the product or use it outdoors. Do not install
directly under a shelf. This product is designed to be installed on an
interior wall using the template, the installation kit and the fixings
supplied. Do not install the product in such a way that it encounters the
power cable.
The product must be mounted on the wall in the position shown in the
accompanying image using the brackets and with the fixings supplied.
Our products transfer heat through the natural air convection. If the product
is covered, this will disrupt the airflow and could cause overheating. It must
be positioned in accordance with the minimum distances shown in the
accompanying picture.
WARNING: The product has an IP24 degree of protection and can be used in
bathrooms, but not in the vicinity of bathtubs, taps, showers, water
connections, toilets, swimming pools or other masses of water. The product can
only be installed in zone 3 of the accompanying picture. The product must
never be installed where it, the switches or the control panel are within the
reach of people in the water. Never use the product with wet hands. Do not
place any water containers (glasses, vases, etc.) on or near the product.
An installation kit is included in the product packaging. You will need a
drill, a rubber mallet, a spirit level and a pencil to complete the
installation.
WARNING: The weight of some of the products may be heavy. The
installation may require two people.
IMPORTANT: Please follow these instructions carefully.
-
Remove the packaging and check that the installation contains brackets, screws, rawl plugs and a cardboard template.
-
Select a suitable location on the wall. Place the template on the wall and mark the holes for the brackets and screws.
Observe the minimum distance requirements from the previous page.
Use the floor as a base for the template, not the skirting board. -
Remove the template and carefully drill out the marked holes.
-
Secure the upper brackets with the rawl plugs and screws provided. Then fix the lower bracket. To distinguish it, the lower bracket has a different design from the top ones.
-
Slide the product up and down over the fixed brackets.
-
Check the straightness with a spirit level and adjust the supports accordingly if necessary.
-
Connect your product to the power supply and switch it on.
-
See section 5 for operating instructions.
IMPORTANT: Template measurements per model
SCREEN & KEYPAD
1| Selected temperature|
---|---|---
2| Current time and day|
3| Heating element on|
4| Comfort mode|
5| Eco mode|
6| Anti-Frost mode|
7| Locked buttonpad|
8| Manual mode|
9| Automatic mode|
10| Preset programs mode|
11| Hourly programming|
12| Open Windows indicator|
13| Energy consumption
indicator|
14| Auto mode / User|
15| Pre-program mode / User|
16| Manual mode / User|
FUNCTIONALITY & PROGRAMMING
5.1. ON & OFF
To turn the product on press the button once. To turn off press the button
again. When you turn the product on for the first time, it will ask you to set
the date and time. Use the buttons to select the correct time and press the
button to confirm. Then use the buttons to select the correct minutes and
press . Use the buttons again to select the correct day and press the button
to confirm.
5.2. SELECT THE SET TEMPERATURE
You can regulate the set temperature of the radiator by using the buttons. Press the button to increase the product temperature by 0.5 ºC or the button to decrease the temperature by 0.5ºC, up to 7ºC. The temperature ranges for each mode are as follows:
| COMFORT | 19 – 30° C |
|---|---|
| ECO | 7.5 – 18.5° C |
| ANTI-FROST | 7° C |
5.3. TEMPERATURE CONTROL
When the room temperature is lower than the selected temperature, the heating
element is activated and the symbol appears. When the room reaches the
selected temperature, the temperature control will perform an intelligent
control, which will activate and deactivate the passage of electric current
through the heating element to heat the radiator fluid.
5.4. LOCK / UNLOCK BUTTON PAD
To lock / unlock the buttonpad using the product control panel, press and hold
the buttons together for 3 seconds.
The On/Off button will still work, even if the control panel is locked. Press
the button for 3 seconds to switch the product on or off.
5.5. SETTINGS MENU
Press the button to access the configuration menu. The available options are:
Settings, Power, and Programming mode.
| Settings
| Set time
---|---|---
Backlight
Language
Firmware
Energy
| Open windows function
Balance mode
Adaptative mode
Prog. mode
| On/off
Preset programs
User mode
Use the buttons to move between the menu options. A box will appear around the option you have selected. Press the button to enter the submenu.
5.5.1. SETTINGS SUBMENU
Press the button to access the configuration menu. Then use the buttons to
navigate to SETTINGS. Press the button to access.
| • Set the day and time
To set the day or time select the CLOCK option.
Use th buttons to select the correct time and press the button to confirm.
Then use the buttons to select the correct minutes and press the button to
confirm. Then use the buttons to select the correct day and press the button
to confirm.|
---|---|---
| • Adjust brightness
This function allows you to adjust the brightness when the product is on or
in standby.
To adjust the brightness, select BACKLIGHT. With the buttons you can turn the
brightness up or down. Press the button to confirm.|
---|---|---
| • Language
This function allows you to change the language of the product.
To change the language, select LANGUAGE. Use the buttons to select the correct
one and press .|
| • Firmware
Press the FIRMWARE option to see the current software version and the release
date.|
5.5.2. ENERGY SUBMENU
Press the button to access the configuration menu. Then use the buttons to navigate to ENERGY. Press the button to access.
| • Open Windows
Use the buttons to select whether you want this function On / Off and press to
save.
When activated, the logo appears on the home screen, to the right of
temperature, indicating that it is active.|
---|---|---
| • Balance
This function resets your product to a temperature of 19ºC in Manual mode.
Use the buttons to select this option and press to confirm. The screen will
show 19ºC in Manual mode.|
| • Adaptive mode
This function anticipates the product start-up, so that the room temperature
at the start of the selected time is equal to the set temperature at the
exact time that we have established during programming. This means your
product will begin heating before the time set. This ensures the temperature
is at the set temperature for the start of the time selected.
To indicate that the algorithm is working, the ****icon will flash.
Use the buttons to select whether you want this function On / Off and press to
save.|
5.5.3. PROG. MODE
To change the status of your product from MANUAL to AUTO or vice versa, make a
quick press of the button . If you want to start programming your product,
make a long press of the button.
To see all the options available for programming your radiator, select the
option PROG. MODE in the main menu. The screen will show the following
options:
| • Mode
From the MODE menu, select the operating mode you require: MANUAL or
PROGRAMMING.
Use the buttons to select manual or programming and press to confirm.|
---|---|---
| • Preset heating programs
From the PRE-PROGRAMS menu you can select a preset heating program to use.
There are 4 available. Use to select between the different programs and
press to confirm.|
Available pre-programs
| • User program
This mode allows the user to make their own programming.
There are 2 ways to start editing the programming:
1. Do a long press on the button.
2. Enter the submenu USER PROGRAM from the main menu.
Then follow the steps below.|
---|---|---
STEP 1| 1. Select the COMFORT temperature:
Temperature range 19 – 30 °C
Use the buttons to select the desired Comfort temperature.
Press to confirm.
2. Select the ECO temperature:
Temperature range: 7.5 – 18.5 °C
Use the
buttons to select the desired
Eco temperature.
Press to confirm.
3. Select between ANTI-FROST or OFF:
Temperature range: 7 °C / OFF
Use the buttons to select the ANTI-FROST or OFF.
Press to confirm.|
STEP 2| Select the days to be programmed
Start on Day 1 (Monday).
Press the button to include this day in your programming. Press the button
again to exclude.
Use the buttons to move to the next day and repeat for all days of the week.
The selected days will be highlighted by a box on the screen.
Once you have reached Day 7, press the button to advance to the next step.|
STEP 3| Select the hour and mode to be programmed
Start on 0h (midnight).
Press the button to select ECO, COMFORT or ANTI-FROST/OFF for that hour. Press
tomove to the next hour and repeat.
• The upper right of the screen shows the hour you are programming.
• The left side shows the selected days.
• The bottom programming bar indicates:
-Comfort mode: 2 shaded squares
-ECO mode: lower shaded square
-ANTI-FROST/OFF: 2 empty squares
Once you reach 23:00 hours, press to complete the programming.|
5.5.4. USER MODE
The USER mode allows the user to define a permitted temperature range.
When in this mode, the symbol corresponding to the USER mode is displayed on
the screen.
Access is gained by means of a password.
The default value is 0000. The numbers are selected with the buttons and
confirmed with the button .|
---|---
If the PIN code is incorrect, the following screen is displayed and then you
return to the previous screen.|
When the PIN code is correctly entered, the following sub-menu appears, where
we can activate the user function, change the PIN
code, set the upper temperature limit and the lower temperature limit.|
MAINTENANCE AND CLEANING
The product does not require any maintenance. We recommend cleaning the product (back, bottom of the product, etc.). Do not use abrasive substances on the product, clean it with a damp cloth and neutral pH soap and the screen with a dry cloth. Before carrying out any cleaning operation, make sure that the product is switched off and at room temperature.
EUROPEAN REGULATION (WEEE) 2012/19/EU
Based on the European regulation 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), these appliances cannot be thrown in the usual council bins; they must be collected selectively to optimise the recovery and recycling of the components and materials that make them up, and reduce the impact on human health and the environment. The crossedout wheelie bin symbol on a horizontal bar is marked on all Osily products to remind the consumer of the obligation to separate them for separate collection. The consumer should contact the local authority or the retailer for information regarding the correct disposal of their product.
WARRANTY
-
Agreement
1.1. This section describes the guarantee conditions available to the buyer when purchasing a new product of the Osily brand. These conditions include all the rights that the buyer has in accordance with current national legislation, as well as the guarantee and additional rights offered by the brand. Any incident detected in your Osily product can be dealt with by the seller of the product or in a more agile way through the manufacturer itself.
1.2. Osily offers you Technical Assistance from our After-Sales Service by telephone at +44 (0)203 769 7624 or email to support@smart-heating- solutions.com, where we will indicate the steps to follow to solve the incident. You will need the product reference (located on the metal characteristics label), serial number, date of purchase and the nature of the fault when contacting us. In addition, you must have a copy of the proof of purchase of the product.
1.3. Osily guarantees there are no material defects of design or manufacture at the time of original purchase. Osily guarantees the body for 120 months (10 years) and the electrical plus electronic components for 36 months (3 years) for this product only, from the date of purchase, or delivery if later, provided it has not been modified, and in accordance with the provisions of the following stipulations.
-
Conditions
2.1. If during the guarantee period, the product under normal use, and with proper maintenance, fails to function properly and is found to be defective in design, material, or workmanship, it will be repaired or replaced at the customer’s option, in accordance with the provisions of the law, and subject to the following terms and conditions:
2.1.1. The guarantee is only applicable if the original guarantee is issued by the seller and when such guarantee has been registered with Osily correctly, including the product reference, serial number (marked on the metal label of the product), date of purchase and proof of purchase. The product guarantee can be registered by sending an email to support@smart-heating- solutions.com within 90 days of installation. Osily reserves the right to refuse a guarantee when this information has been removed or modified after the original product purchase.
2.1.2. The guarantee is only applicable if the product has been installed by a competent person in accordance with this installation manual and all regulations in force at the time of installation.
2.1.3. The guarantee is only applicable to those cases that refer to defects in material, design and manufacture, and in no case covers damage to the product for the following reasons:
i) Damage caused by negligence and/or misuse of the product, i.e. used for purposes other than its normal use, or by not respecting the instructions for use, maintenance and cleaning given by Osily, as well as by incorrect or inadequate installation or use of the product that may not comply with the technical safety standards in force.
ii) Corrosion of any part of the product caused by direct exposure to saltwater. Where the product is installed within 200 m of the coast, the guarantee period for damage caused by corrosion shall be reduced by 50%.
iii) Any unauthorised modifications or repairs to the product carried out by third parties or unauthorised persons, or the opening of the product by third parties or unauthorised persons.
iv) Any accident deemed to be beyond Osily’s control, such as (but not limited to): lightning, fire, flood, natural disasters, public disorder, atmospheric or geological phenomena, and all those of a similar nature.
v) Failures resulting from incorrect installation. In case of doubt, please contact Osily.
2.2. Any repair or replacement carried out as part of this guarantee service does not allow for extension periods or new guarantee periods, i.e. your guarantee will not be extended in the event that a repair or replacement of this product is carried out, but will be suspended until the product is returned repaired or a new one is delivered.
2.3. Any repair or replacement covered by this guarantee must be a functionally equivalent part. Defective parts or parts removed or replaced shall become the property of Osily and must be returned as such.
2.4. The product must be installed in such a way as to allow access by Osily technicians or authorised persons in the event that they need to access the product for repair or maintenance.
The user/customer is responsible for the organisational means necessary to allow access to the products by Osily for repair or replacement.
2.5. Osily’s Technical Support department will advise you if you need to purchase any parts not covered by this guarantee or outside of this guarantee.
2.6. This guarantee will not be valid if the product has been tampered with, modified and/or repaired in any way and/or by unauthorised persons. This guarantee will also not be valid if the product is not correctly installed.
2.7. This guarantee is not transferable and does not include claims for limescale or frost damage.
2.8. This guarantee does not affect the purchaser’s statutory rights under applicable national legislation, nor does it affect any rights contracted with the dealer or installer that may arise in performance of the contract of sale.
2.9. Osily, its offices, employees, distributors and installers shall not be liable for any incidental damages arising from the infringement of any rule implied in this product, as well as for its improper or incorrect use.
2.10. Check the EULA conditions (supplied with the product for Wi-Fi connected products) for information on the legal agreement you accept when installing a Osily product. For product or guarantee assistance, please contact Osily by telephone at +44 (0)203 769 7624 or by email to support@smart-heating- solutions.com.
ITEM| SYMBOL| UD.| OSRD0500| OSRD0750| OSRD1000|
OSRD1250| OSRD1500| OSRD1750| OSRD2000
---|---|---|---|---|---|---|---|---|---
HEATING POWER| |
Nominal heat output| Pnom| kW| 0.5| 0.75| 1.0| 1.25| 1.5| 1.75| 2.0
Minimum heating capacity (indicative)| Pmin|
kW
|
N.A.*
|
N.A.*
|
N.A.*
|
N.A.*
|
N.A.*
|
N.A.*
|
N.A.*
Maximum continuous heat output| Pmax,c|
kW
| 0.5| 0.75| 1.0| 1.25| 1.5| 1.75| 2.0
AUXILIARY ELECTRICITY CONSUMPTION| |
Nominal heat output| elMAX| kW| 0.500| 0.750| 1.0| 1.250| 1.500| 1.750| 2.000
Minimum heating capacity (indicative)| elMIN|
kW
| 0.500| 0.750| 1.0| 1.250| 1.500| 1.750| 2.000
In stand-by| elSB| kW| 0.002| 0.002| 0.002| 0.002| 0.002| 0.002| 0.002
TYPE OF HEAT OUTPUT| | |
Electronic indoor temperature control and weekly timer| | |
✓
|
✓
|
✓
|
✓
|
✓
|
✓
|
✓
OTHER CONTROL OPTIONS (SEVERAL CAN BE SELECTED)| | |
Indoor temperature control with open window detection| | |
✓
|
✓
|
✓
|
✓
|
✓
|
✓
|
✓
With adaptive start-up control| | |
✓
|
✓
|
✓
|
✓
|
✓
|
✓
|
✓
With operating time limitation| | |
✓
|
✓
|
✓
|
✓
|
✓
|
✓
|
✓
SEASONAL ENERGY EFFICIENCY PERFORMANCE|
ηs
| |
38%
|
38%
|
38%
|
38%
|
38%
|
38%
|
38%
NOTES
AER
ZAC Du Caillou, Rue Jules Verne
69630 CHAPONOST, France
www.osily.co.uk
OSILY cannot accept any responsibility for any errors in catalgoues, brochures
and other printed materials. OSILY reserves the right to alter its products
without notice. This also applies to products already on order provided that
such alterations can be made without subsequent changes to specifications
already agreed. All trademarks in this material are the property of OSILY.
OSILY and the OSILY logotypes are trademarks of AER.
All rights reserved.
MPPAMAN539
MOSIRUK22V1
Documents / Resources
|
osily OSDR0500 Digital Electric
Radiator
[pdf] Installation Guide
OSDR0500 Digital Electric Radiator, OSDR0500, Digital Electric Radiator,
Electric Radiator, Radiator
---|---