ESORUN TECHNOLOGY X1045 10000mAh Magnetic Wireless Power Stand User Manual

ESORUN TECHNOLOGY X1045 10000mAh Magnetic Wireless Power Stand

Product Information

Specifications:

• Compliance: Part 15 of FCC Rules
• RF Exposure: General exposure requirement met

Product Usage Instructions

Caution
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure
The device has been evaluated to meet general RF exposure requirements.

Frequently Asked Questions (FAQ)

• Q: Can I make modifications to the device?
  A: Any changes or modifications not explicitly approved by the manufacturer could void your authority to operate the equipment.

• Q: What are the compliance standards for this device?
  A: The device complies with Part 15 of the FCC Rules, ensuring it meets specific operational requirements.

Model : X1045
1 0000mAh Magnetic Wireless Power Stand for iPhone 15/14/13/12 and subsequent series, Airpods 3

What’s Included

Specifications

• Battery Capacity 10000mAh
• TypeC Input PD5V/3A,9V/2A, 12V/1 5A, 15V/1.8A 27W(Max)
• Type C Output PD 5V/3A,9V/3A, 12V/3A, 15V/3A, 20V/2 25A 45W(Max)
• USB-A Output SV/3A, 9V/2 22A, 12V/1 67A
• Wireless Output SW, 7 SW, 1 OW, 1 SW{Max)
• Simultaneous Output 5V/3A
• Product size 115.2x66x24.6mm
• Weight 230g

Product Structure

1. Wireless Charging Area
2. Switch
3. Indicator
4. Foldable Stand
5. USB A Output
6. Type-C Input/Output

Dlgltal DI splay Screen

Tips:

1. If the wireless charging mark off, please kindly check whether there is a magnet or metal element to effect.
2. If wired charging, there is not wireless charging mark on the screen.
3. When start to charge, it does not show a fast charging mark immediately. It needs several seconds to change to fast charging mode.
4. When the power bank only charges 1 device, it’s fast charging. If charge 2 or more devices simultaneously, the max output power 5V/3A, not fast charging.

Stand

The stable stand of this power can be folded to flat for travelling. Not only a stand, but also a power bank.
When you don’t need to charge, it can be a Mag Safe stand to support your phone (horizontally or vertically). Just need to press the switch twice to turn off.

How To Use

Use of Switch

• Single Press: Turn on
• Double Press: Turn Off
  • Press the switch once to power on and the battery indicator will light up. Then It’s In standby mode and other devices wlll be charged.
  • Press the switch twice continuously, it will be power off. And then It will be a magnetic phone stand.

Wireless Charging Operation

Please fit the product with the back of your iPhone {12, 13, 14, 15 series or Airpods 3) or another wireless charging phone (which with Magsafe-compatible ring attached), then it will charge your phone automatically via the built-in magnetic wireless charging. Max to be 15W, and I IPhone series is 7.5W due to I iPhone’s restrictions.

Note:

1. The magnetic wireless power bank Is mainly used for 1Phone 12, 1Phone 13, 1Phone 14 series, or phones with Magsafe-comp1table ring attached (Please note some of Magsafe-compat1ble rings from the 3rd might not work). It can also used with Airpods 3.
2. Please press the switch to turn on the power bank before charging your device.

Charging The Power Bank

Please recharge the product when the power or battery is low.

1. Using the included cable, connect the USB-A connector to QC/PD adapter and the Type C connector to the input connector of the power bank.
2. During charging or completion, the battery power LED indicator will show the charging status with the specific figures.

Pass-Through Charging
You can put your iPhone 12/13/14/15 and subsequent series, AirPods 3 on the wireless charging area and connect this power bank to the power source (PD or QC Adapter). It will charge the power bank itself and your iPhone 12/13/14/15 AirPods 3 at the same time.

Note:

• While passing through charging, the phonew1II be in fast charging and power bank
• Is In slow charging When the phone ls fully charged, the power bank ls In fast charging mode.

Type C & USB A Output Operation

1. lnsert the Type C or USB A connector to your Devices
2. Start Charging

Warning

• Do not drop, misuse or apply excessive force to your power bank. Power banks contain batteries and a circuit board with fragile components that can be damaged if misused.
• If your power bank swells or bulges, stop use immediately and appropriately dispose of the power bank.
• Store the power bank in a cool and dry place. Do not store in hot or humid environments.
• All power banks have safety power cut-off features to stop overcharging & overheating,
• When charging a device the power bank may feel warm, this is a normal operating condition & should not be cause for concern.
• Normally, this charger and your smartphone will be hot under operating conditions and it may be more hotter when charging and using at the same time(such as when playing music).
• In normal conditions, battery performance will decline over several years.

Remarks
When your wireless power bank works improperly

1. Make sure there Is no clutters on the wireless power bank, such as magnets, metal, credit card and other foreign obJect.
2. When the wireless power bank Is overheating take your mobile device away from your wireless power bank and the power bank will stop charging automatically when overheating. Please try charging again when the wireless power bank cooling down

Made in China

FCC

This equipment has been tested and found to comply with the limits for a ClassB digital device, under part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aerial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>