Shenzhen Esorun Technology MAGHOLDS01 Magnetic Wireless Charger User Manual
- June 6, 2024
- Shenzhen Esorun Technology
Table of Contents
Magnetic Wireless Car Mount
User Manual
- Only fits for iPhone 12/13 series or smartphones with MagSafe cases.
Note: For best performance and safety, please read this manual carefully before using the product.
Product Diagram
User Instruction
1. Connect the air vent clamp to the device;
- Unscrew nut
- Place nut around ball head, insert into the socket
- Tighten nut clockwise
2. Attach the clamp to the car vent
Turn the locking knob to adjust the length of the hook clip, and place the
hook clip on your car’s air vent.
Turn the locking knob to adjust the length of the hook clip until the grip securely locks onto your air vent.
3. Connected Power To Charger
Use the Type-C cable packed in the box to connect the device and the car charger.
Tips:
When using this product, please make sure that the product is connected to the
power. To achieve fast charging, a QC2.0/3.0 car charger is required.
4. Charging your iPhone
Please fit the product with the back of your iPhone, it will charge your iPhone automatically via the built-in magnetic wireless charging, Max to be 15W.
Note:
- Under normal charging conditions, the charger and mobile pho are slightly hot; the temperature may rise if the mobile phone is charging (such as playing video).
- Please stop charging your phone when the charger is ove Our product will automatically stop charging when over it again when it’s cooling down.
Precautions
- Please carefully handle your charger and accessories, the following recommendations will help you effectively use the warranty service.
- Please keep the equipment dry. Rain, moisture, and various liquid may contain minerals that will corrode the circuit. If the equipment is wet, please dry the product as soon as possible or use a soft cloth to wipe it clean. losing the data stored due to magnetization.
- When charging, please select the regular 5V/2A, 9V/2A chargers. Do not use any damaged chargers.
- Please do not attempt to charge the equipment with exposed or case broken, and do not charge the equipment that are incompatible with this product.
- Do not store the equipment in a cold place. Otherwise, if the temperature rises to normal temperature, moisture will pent up inside it and damage the electric appliance.
- Do not attempt to open the equipment, unauthorized disassembly or modification will damage equipment or related wireless charging functions.
- Do not throw, tap or shake the equipment; rough handling of the equipment will damage the internal circuit board and the mechanical structure.
- Use a clean and moist soft cloth to clean the surface of the equipment. Do not use or store the equipment in dusty or dirty places.
- Some components of this product are magnetic and metal materials may be adsorbed onto this product. Please do not use bank cards, credit cards or any other items with magnetic near the product so as to avoid losing the data stored due to demagnetization.
Fits Below Supports (Not Included) Ball Diameter: 16.8-1-0.3mm
Specifications:
Input | 5V/2A, 9V/1.34A, 9V/2A,12V/2A |
---|---|
Wireless Output | 5V/1A,(5W) 9V/0.83A,(7.5W) 9V/1.12A,(10W) 9V/1.67A(15W) |
Charging Efficiency | ≥80% |
Product Size | 9171.60.57.3 mm (3.62.370.29 inch) |
In The Box
Made In China
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.
The distance between user and products should be no less than 15cm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>