RUPT 2BC3DDIPSTER Dipster Waterproof Wireless Speaker User Manual

RUPT 2BC3DDIPSTER Dipster Waterproof Wireless Speaker

Product Information

Specifications

• Speaker Type: Waterproof Bluetooth Wireless Speaker
• Speaker system: Stereo
• Dimensions: 13112528mm
• Weight: 292g
• Driver: 50mm
• Audio Playtime: Approx 10 hours (@50-60% Volume)
• Bluetooth Version: V5.3
• Rated Power: 5W
• Power Supply: Built-in 3.7V 1800mAh Lithium Battery
• Charging Time: Approx 2.5 hours (USB C)
• IPX rating: IPX7
• Frequency Response Range: 100-20KHZ
• Input power: DC 5V/1A

Product Usage Instructions

1. Turn on the speaker by pressing the Power button until you hear the boot sound.
2. Open the Bluetooth settings on your phone and select “Dipster” to pair with the speaker.

FAQ

• Q: How do I charge the speaker?
  • A: You can charge the speaker using a DC5V/1A adaptor or USB cable.
• Q: What should I do if the speaker shuts down after 15 minutes of no pairing?
  • A: If the speaker is not paired for 15 minutes after booting, it will shut down automatically.
• Q: How can Apple users adjust the volume if it seems low?
  • A: Apple users can turn off the setting on their phone by going to Settings > Sounds & Haptics > Headphone Safety > Reduce Loud Sounds.

What’s in the box

Key functions

1. Power on/off: Single click to power on/off
2. Play/Pause: Double-click to play/pause the music
3. Call/answer: When an incoming call, one click will answer or hang up, press and hold to reject the call.
4. Paring mold: hold 2s
5. -: volume down-single click, Previous track-hold 2s
6. +: volume up-single click, next track-hold 2s
7. siri:3 click
8. TWS mode: hold power button for 2 seconds and click the – at the same time (Bule light slow flash)
9. TWS off:5 click
10. LED light display:
    • Power on: Blue Flashing, ready for bluetooth paring.
    • Paired: Blue led off
    • Play mode: Light Continuous blue
    • Charging: RED light keeps on while charging, off while charging is completed.
11. Tws on: Bule light slow flash
12. While Max / minimum volume, you can hear a prompt tone

Notes:

1. Charging with DC5V/1A adaptor or USB Cable
2. While max/minimum volume, you can hear a prompt tone

Bluetooth Connection

Notes:

1. If it is not paired for 15 minutes after booting, it will shut down. When low battery,you can hear the prompt tone then the speaker will power off automatically
2. If Apple users feel that the volume is low, you can turn off this setting on the phone(Settings-Sounds & Haptics-Headphone Safety-Reduce Loud Sounds)

Specifications

Safety Instructions

1. Keep the product away from extremely hot and cold environments, it will damage the battery and circuit.
2. Avoid liquid immersion into the product.
3. Do not disassemble the product.
4. Do not use concentrated chemical products or detergents to clean the product.
5. Use only 5V/1A power supply. Connecting the power supply voltage too high may cause serious damage.
6. Do not randomly discard or place the product near fire or high temperature to avoid the danger of explosion.

FCC statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interterence received, including interterence that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment,

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>