ESORUN DMS03 4 In 1 Magnetic Wireless Charger User Guide

June 3, 2024
ESORUN

ESORUN-LOGO

ESORUN DMS03 4 In 1 Magnetic Wireless Charger

What’s Included

ESORUN-DMS03 4-In-1-Magnetic-Wireless-Charger-01

Wireless Charging Dock-Specifications

ESORUN-DMS03 4-In-1-Magnetic-Wireless-Charger-22

Wireless Charging Dock-Product Structure

  1. Wireless Charging Area for Power Bank
  2. Pogonip P13 TWS Earphone Indicator/ Power Indicator
  3. Wireless Charging Area for
  4. TWS earphone or other Qi-enabled devices
  5. Non-slip Mat
  6. Wireless Charger for Apple Watch
  7. Type-C Input
  8. USBAOutput

Wireless Charging Dock-LED Usage

Earphone charging indicator:

Standby mode Red
Ch.iri,,:ir111,mudl’ Green light on
Green light on
me Red green light flash

Connected Indicator
When connected the source, the LED light near the earphone wireless charging area is red on. When your charge earphone, this LED light is changed to earphone wireless charging indicator,

Wireless Charging Dock-Stand

Apple Watch Charger-Product Structure

  1. Wireless Charging Area for Apple Watch
  2. Apple Watch Charger Case
  3. Type-C Input
  4. Watch Charging Indicator

Apple Watch Charger-LED Usage

Watch charging indicator

  mode Green light
Charging mode Greenlight Limiting

Power Bank

Power Bank-Specifications

ESORUN-DMS03 4-In-1-Magnetic-Wireless-Charger-23

Power Bank-Product Structure

  1. Wireless Charging Area
  2. Power Rate Indicator
  3. Wireless Charging Status Indicator
  4. Pass-through charging via Type C Input/ Output
  5. Heat Dissipation Hole
  6. Switch
  7. Foldable &Adjustable Aluminum Stand (0-180)-
  8. Copper Sheet for the Charging Dock

Power Bank-LED Usage

Standby mode Red llghtnn
Ch.iri,,:ir111,mudl’ Green light on
chargingfu(I Green light on
me Red green light flash

Power Rate Indicator

Power Bank-Stand

The stable stand of this power bank is not only for the angle-adjusting, but also can be folded to flat for travelling. You can adjust the angle(0-180″) according to your needs. When you need not to charge, you can use it as a simple Massif stand to support your phone (in horizontally or vertically). Just need depressing the switch by double quick press.

Please Note: Certain Vibration will restart the Charging Again.

Wireless Charging Dock-How To Use

Please use the included PD20W adapter and cable to connect this wireless charging dock to the power source.

Note: Please use our PD 20W adapter to plugin the correct input port (Type C port on the bottom) USB-A and the Type C port on the top is just Output port.

Wireless Charging Dock – Extra USB Output
Using the US8-A to Type-C cable(Not included), connect the USB-A cable into the dock and the other side to the devices you want to charge, such as iPad, phone, earphone, Switch and so on.

Wireless Charging Dock-Wireless Charging for power bank
After connecting the power source, please put the power bank in the charging dock and make sure that the metal contacts of the power bank is touched with that of charging dock. It will charge automatically. When the power bank is charged, it’s green light flashing, When it’ full charged, 3 indicator keep green light on.

Wireless Charging for phone
Please fit the product with the back of your iPhone (12, 13, 14 series] or other wireless charging phone I which with Magnate case) it will charge your phone automatically via the built-in magnetic wireless charging, Max to be 15w, iPhone series is 7.5W due to iPhone’s restrict.

Note: if power bank and phone are charged simultaneously, it’s fast wireless charging for phone while power bank is in slow charging. When the phone full charged, the power bank is in fast charging mode.

Wireless Charging Dock -Wireless charging for Apple Watch
Please remove the case of watch charger and inserted it into the corresponding position of charging dock,

Wireless Charging Dock-Wireless charging for Apple
Watch Please make sure your Apple Watch is corresponded to the area of the wireless chargerfor Apple Watch. it will automatically detect the Apple Watch and charge it.

Wireless Charging Dock – Wireless charging for TMS earphone


Please lay down your earphone on the charging area and then it will automatically detect and charge(5W Max).

Power Bank-Use Of Switches 9

Single Press: Turn on
Double Press: Turn off
Press the switch once to power on the product the battery indicator will light up. Then it is in the standby state and other devices can be charged. Press the switch twice continuously, then the output will turn off.

Tips: In standby mode it will turn off automatically after about 35 seconds without performing other.

Power Bank-Wireless Charging Operation
 Please fit the product with the back of your iPhone (12, 13, 14 series or Earpads 3) or other wireless charging phone (which with Magsafecompitable ring attached, it will charge your phone automatically via the built-in magnetic wireless charging, Max to be 15W, iPhone series is 7.5W due to iPhone’s restrict.

Note

  1. The magnetic wireless power bank is mainly used for iPhone 12, iPhone 13, iPhone 14 series, or phones with Magnate computable ring attached (Please note some of Misgave compatible rings from the 3rd might not work). And it can also used with Airpods 3.
  2. The power bank has a built-in vibration sensor when you place the iPhone or Airpods 3 in the charging area, then charging will automatically turn on (Ifyou just want to use the magnetic stand function, just double-click on the power switch to turn off the charging function).

Charging The Power Bank
Please recharge the product when the power or battery is low.

  1. Using the included cable (like USB-A to Type-C cable or C TO C), connect the USB- Aor C connector into QC/PD adapter and the Type-C connector to the input connector of the power bank
  2. During charging, Green LED indicators will flash to show charging status.
  3. When charging is complete the Green LED indicators will stays on.

Pass Through Charging
You can put (Stick to) your iPhone 12/13/14 series, Airpods 3 on the wireless charging area and connect this power bank to the power source (PD or QC Adapter). It will charge the power bank itself and your iPhone12/13/14/Airpods 3 at the same time.

Note: While charging, the phone will be in fast charging and power bank is in a slow charging. When phone is fully charged, the power bank is in fast charging mode.

Power Bank Operation

  1. Insert the charging cable Type C end into Output.
  2. Plug the other end of the cable into a terminal such as phone.
  3. Using the USB-A to Type-C or c-C cable (Not included), connect the C cable into the power bank and the other side to the devices you want to charge, such as iPad, phone, earphone, Switch and soon.

Note: When the power bank only charge one device, whether C port or wireless charging area, the output support fast charging; if two device, the maximum output power is 5V/3A, no fast charging.

Warning

  • Do not drop, misuse or apply excessive force to your power bank. Power banks contain batteries and a circuit board with fragile components that can be damaged if misused.
  • If your power bank swells or bulges, stop use immediately and dispose of the power bank in an appropriate manner. Store power bank in a cool and dry place. Do not store in hot or humid environments.
  • All power banks have safety power cut off features to stop overcharging & overheating.
  • When charging a device the power bank may feel warm, this is a normal operating condition & should not be cause for concern. It’s normal that this charger and your smart phone will be hot under operating conditions and it may be more hotter when charging and using at the same time (such as playing music).
  • In normal conditions, battery performance will decline over several years.
Remarks

When your wireless power bank works improperly

  1. Make sure there is no any clutters on the wireless power bank, such as magnet, metal, credit card and other foreign object.
  2. When the wireless power bank is over-heating take your mobile device away from your wireless power bank and the power bank will stop charging automatically when over-heating. Please try charging again when the wireless power bank cooling down.

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.
    The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ESORUN User Manuals

Related Manuals