Tiny Love 308 5 In 1 Here I Grow Stationary Activity Center Instructions
- June 12, 2024
- Tiny Love
Table of Contents
Tiny Love 308 5 In 1 Here I Grow Stationary Activity Center
Product Information
- Product Name: 5-in-1 Here I Grow Stationary Activity Center
- Product Description: The 5-in-1 Stationary Activity Center by
Tiny Love is a versatile activity center designed to provide entertainment and stimulation for babies. It features a fabric seat with a seat ring, a removable activity tray with a piano and five removable toys, and three legs for stability. The product is designed to be safe and secure for babies during playtime.
Styles may vary.
Product Usage Instructions
-
Read all instructions before assembly and use of the product. Failure to follow the instructions could result in injury or death.
-
Do not substitute parts or try to modify the product in any way. Parts not provided and approved by Dorel Juvenile Group may result in an unsafe product.
-
Ensure that the product is assembled correctly and securely before use.
-
Do not use the product when the child is able to climb out.
-
Always ensure that the child is supervised while using the product.
-
Place the product on a flat and stable surface.
-
Do not allow the child to stand flat-footed on the cover of the jumping platform or floor while the jumping platform is installed.
Adjust the seat height before placing the child in the seat. -
Keep these instructions for future use.
If you have any issues or need assistance, please visit our website at
www.tinylove.com to chat with us. You can also
text us at 812-652-2525 or call
Consumer Care at 888-846-9568. Remember
to have your model number and date code (manufacture date located on the
bottom of the tray assembly) ready.
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may affect its operation.
Parts List
- A: Fabric seat
- B: Seat ring
- C: Cover
- D: Activity tray
- E: Legs (3)
- F: Stool/Jumping platform
- G: Piano (removable)
- H: Toys (removable) (5)
Note: For your convenience, the following parts may come pre-assembled:
A and B: Follow instructions to be certain they haven’t loosened during
shipping.
C and D: Separate parts by following step 1 below.
Assembly
-
Remove the Cover from the Main Tray: Rotate the cover until the arrow on the cover is in line with the unlock symbol on the main tray. Lift the cover off the main tray. You will use the cover in
step 3. -
Install Legs: Turn the activity tray upside down. Orient one leg with the anti-slide foot upward. Push the leg into the opening on one side of the tray. Repeat with the other two legs. Flip the assembly onto its feet.
Warnings
Read all instructions before assembly and use of the product.
- Keep instructions for future use.
- Do not use the product if it is damaged or broken.
- Failure to follow these warnings and the assembly instructions could result in injury or death.
IMPORTANT:
For use as an Infant Activity Center/Baby Balance Board:
-
Recommended for indoor use.
-
Adult assembly required.
-
DO NOT use any replacement parts not provided and approved by Dorel Juvenile Group. DO NOT substitute parts or try to modify the product in any way. Parts not provided and approved by Dorel Juvenile Group may result in an unsafe product.
-
Baby must be able to sit up unassisted, must not weigh more than 30 lbs. (13.6 kg) or be taller 32 in. (81.3 cm).
Discontinue use of product as an infant activity center/baby balance board when baby can walk unassisted or when child is able to climb out.
NEVER leave child unattended. Always keep child in view while in product. -
Allow only the child’s toes to touch the cover of the jumping platform or the floor. DO NOT allow the child to stand flat-footed on the cover of the jumping platform or the floor in any position.
-
NEVER use jumping platform if the child can touch the floor while the jumping platform is installed.
-
NEVER adjust height with child in seat. ALWAYS adjust height before placing child in seat.
WARNING:
FALL HAZARD:
Babies can FALL from product resulting in head injuries.
- NEVER leave child unattended. ALWAYS keep child in view while in stationary activity center.
- NEVER use near stairs, steps, pools, hot surfaces or areas that may be hazardous to a child.
- To avoid tip over, place product on a flat, level surface.
STRANGULATION HAZARD:
Strings can cause STRANGULATION.
- DO NOT place items with a string around child’s neck, such as hood strings or pacifier cords.
- DO NOT suspend strings over product or attach strings to toys.
For use as a toddler play table:
- When child can stand up and walk unassisted to 5 years old.
For use as a child stool and table:
- When child is from 2 to 5 years old or weights up to 50 lbs. (22.7 kg).
Keep These Instructions For Future Use
- Remove all contents from packaging and discard box, protective plastic covering and/or poly bags.
- Wipe down activicty center parts with warm soapy water before use.
- Lay out and identify all parts.
- Please do not return this product to the place of purchase. To address any issues, please visit us at www.tinylove.com to chat with us there. You can also text us at 812-652-2525 or call Consumer Care at
888-846-9568. Have your model number and date code (manufacture date located on the bottom of the tray assembly) ready.
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission’s rules.
Parts List
- A: Fabric seat
- B: Seat ring
- C: Cover
- D: Activity tray
- E: Legs (3)
- F: Stool/Jumping platform
- G: Piano (removable)
- H: Toys (removable) (5)
Note: For your convenience, the following parts may come pre-assembled:
A and B : Follow instructions to be certain they haven’t loosened during
shipping.
C and D : Separate parts by following step 1 below.
Assembly
Remove the Cover from the
Main Tray C D:
Rotate the cover until the arrow on the cover is in line with the unlock
symbol on the main tray. Lift cover off main tray. You will use the cover in
step 3.
Install Legs D E: Turn activity tray upside down. Orient leg as shown with anti-slide foot upward. Push leg into opening and ensure locking tab snaps in place. Repeat on other two legs. Flip assembly onto its feet.
Assemble the Cover onto the Jumping Platform C F:
Position cover with knob facing up. Fit stool top into wide and narrow grooves
on cover.
Turn knob to lock cover. Flip assembly right side up.
Assemble Jumping Platform to the Main Assembly : E F
Snap the jumping platform onto the three knobs on the lower legs. Press firmly
to ensure it is secured.
NOTE: Never install the jumping platform to the main assembly without the
cover in place.
WARNING:
Make certain all legs and jumping platform are fully secured before
proceeding.
To Attach Seat Pad A, B : (may be pre-assembled)
-
A Ensure seat pad is in right orientation with print on inside and plain fabric exposed. Place seat pad into seat ring with triangle tab aligning with triangle on front of seat ring.
Note: The seat pad tab with a triangle (all other tabs have 2 lines) should line up with the widest post. -
B Insert the 8 tabs on seat pad into grooves on seat ring and fasten them to 8 posts.
To Attach Seat to Tray: -
C With the top of the tray facing up, place seat ring into center of the tray and press down until you hear two loud clicks.
NOTE: Apply pressure around entire seat ring to ensure it snaps into place.
IMPORTANT: Fabric seat A B must be secure before use. Tab
To make certain, pull up on seat fabric above each tab.
NOTE: To detach fabric for washing, see Convert To Triangle Table section.
WARNING: Check seat tabs for security before each use.
Install and Replace Batteries G :
Using Phillips head screwdriver, remove battery compartment door on piano
toy. Insert two AA batteries (not included) into the compartment as indicated.
Replace and secure battery door.
Note: Reference battery compartment for proper battery orientation.
Troubleshooting: Install new batteries and re-try function before calling Consumer Care on electronics. We recommend alkaline batteries for longer battery life.
BATTERY CAUTION
- Keep these instructions as they contain important information.
- We recommend alkaline batteries for longer battery life.
- DO NOT mix old and new batteries.
- DO NOT mix alkaline, standard (carbon zinc), or rechargeable (nickel cadmium) batteries.
- Non rechargeable batteries are not to be recharged.
- Rechargeable batteries are to be removed from the unit before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Only batteries of the same or equivalent type as recommended are to be used.
- Batteries are to be inserted with the correct polarity.
- Exhausted batteries are to be removed from the unit.
- The supply terminals are not to be short-circuited.
- Check that all contact surfaces are clean and bright before installing batteries.
- DO NOT submerge any part of the product in water.
- Dispose of batteries safely.
- Remove batteries when stored for long periods of non-use.
Attach Piano :
Reach under tray and press button up. Note: It doesn’t matter which location —
toys are interchangeable.
Align slot on bottom of piano to button and slide piano toward outer edge of tray into place.
NOTE: Reverse procedure to remove piano.
Attach 4 Toys :
Reach under tray and press button up under each toy.
Insert toy in opening, push down and turn toy clockwise into place. Repeat for
other 3 toys.
To Remove Toys for Play:
Reach under tray and press up on button under each toy. Turn toy counter-
clockwise and pull up
Adjusting Height :
- A. Press jumping platform button and release from lower leg.
- B. Press leg height button and slide button down.
- C. Twist foot and adjust height to position 1, 2 or 3.
- D. Twist foot back to in-use position.
- E. Reattach jumping platform to lower leg.
- F. Repeat above steps to ensure that all three legs are set to the same height.
- G. Adjust height so your baby can stand comfortably making sure that only the ball of each foot is touching the floor/ jumping platform. If the ball of each foot does not touch the floor/jumping platform, lower the height. If baby stands flatfooted, raise the height.
Note: Discontinue use of the jumping platform if baby can stand flat-
footed in the highest position.
Discontinue use of the seat if baby can stand flat-footed on the floor.
IMPORTANT: Always ensure that the legs are secure and the legs are set at the same height before each use.
CAUTION:
NEVER adjust height with your child in seat.
ALWAYS adjust before placing child in seat.
Spin and Jump Features:
Your child can spin 360° in the seat and jump on the center on the jumping
platform. 
Music :
Adjust music volume to any of 3 levels.
Turn off to conserve batteries.
Convert to Play Table and Stool
Remove Fabric Seat and Seat Ring :
- A. Locate and push out the 3 seat ring tabs under the tray.
- B. Push seat ring out of tray.
- C. Disengage the tabs around the seat ring and remove seat pad.
See washing instructions .
NOTE: Remove toys, if desired, by referring to the Attach Toys section.
Assemble the Stool :
- A. Press button on jumping platform’s leg and pull leg up and out (for 3 legs). Remove jumping platform.
- B. Turn jumping platform upside down, turn knob to unlock, and remove cover. Set cover aside for step 3.
- C. To bend legs:
- Press button on underside of each leg and
- Pull leg out to release it.
- Rotate leg up, then
- Press leg downward until it clicks
WARNING:
To avoid serious injury, ALWAYS make certain all legs are fully secured before
sitting on stool. DO NOT use cover when using the stool. ALWAYS REMOVE cover.
Assemble the Cover to the Main Tray :
Place the cover into the seat opening with the arrow on the cover lined up
with the unlock symbol on the activity center. Rotate the cover until the
arrow on the cover is in line with the lock symbol on the activity center.
NOTE: Remove the toys, if desired, referring to the
Attach Toys section.
Care and Maintenance
-
Grip Strips: ALWAYS MAKE SURE GRIP STRIPS ARE KEPT CLEAN. Clean grip strips with water only.
-
Base and Tray Assembly: Surface wash with warm soapy water and allow to drip dry. Be sure to keep product away from direct sunlight or heat.
-
Toys: DO NOT SUBMERGE TOYS IN WATER. Surface wash and towel dry all toys.
NOTE: Make sure to wring out cloth thoroughly beforehand and allow to drip dry before use. -
Wash Seat Pad: Machine-wash in cold water on gentle cycle. Drip dry or line dry. No bleach. No iron.
-
Assemble Seat Pad: See step 4 in Assemble Fabric Seat section for details.
One (1) Year Limited Warranty
Dorel Juvenile Group, Inc. warrants to the original purchaser that this
product (5-in-1 Stationary Activity Center) is free from material and
workmanship defects when used under normal conditions for a period of one (1)
year from the date of purchase. Should the product contain defects in material
or workmanship Dorel Juvenile Group, Inc., will repair or replace the product,
at our option, free of charge. Purchaser will be responsible for all costs
associated with packaging and shipping the product to Dorel Juvenile Group
Consumer Relations Department at the address noted on front page and all other
freight or insurance costs associated with the return. Dorel Juvenile Group
will bear the cost of shipping the repaired or replaced product to the
purchaser. Product should be returned in its original package accompanied by a
proof of purchase, either a sales receipt or other proof that the product is
within the warranty period. This warranty is void if the owner repairs or
modifies the product or the product has been damaged as a result of misuse.
This warranty excludes any liability other than that expressly stated
previously, including but not limited to, any incidental or inconsequential
damages.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS THAT MAY VARY FROM STATE TO STATE.
For more developmental information and playing tips please visit: www.tinylove.com
©2022 Tiny Love LTD. www.Tinylove.com
©2022 Dorel Juvenile Group, Inc.
888-846-9568
www.djgusa.com. Styles and colors may vary. . Made in
CHINA. Hecho en CHINA.
Distributed by
Dorel Juvenile Group, Inc., 2525 State St., Columbus, IN 47201-7494. Dorel
Juvenile Canada, 2233 Argentia Road, Suite 110, Mississauga, ON L5N 2X7. En
Centro América, Caribe y Ecuador por: Best Brands Group S.A. – Av. Balboa, Bay
Mall Plaza, Planta Baja, local 9, Panamá. – Fono: (507) 300 2884. En Colombia
por: Baby Universe S.A.S. – Vía 40 No. 77-29, Barranquilla, Colombia – Fono:
(575) 353 1110 Importador: DJGM, S.A. DE C.V. Gabriel Mancera No. 1041 Col.
Del Valle, Benito Juárez C.P. 03100 México, Ciudad de México R.F.C.
DJG140305GN9 Tel. (55) 671992020 06/28/22 4358-8276B