CRYSTORAMA AND-9201-CL-MK Andover 1 Light Matte Black Outdoor Wall Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA AND-9201-CL-MK Andover 1 Light Matte Black Outdoor Wall Mount
Product Information
The product model is AND-9201-CL-MK. The product is manufactured by Crystorama.com. The fixture is wet-rated and requires 1 medium bulb with a recommended wattage of 60 watts and a maximum wattage of 100 watts. LED bulbs are recommended for extended use. The product comes with mounting hardware, a backplate, arm, loop, ball nut, top cage, socket, glass shade, and nut.
Product Usage Instructions
- To install the glass shade, separate the Bottom Cage by removing the Nut.
- Insert the Glass Shade into the Bottom Cage.
- Install the bulb into the socket.
- Attach the Bottom Cage to the Top Cage by screwing a Nut and securing the two together.
- Attach the Backplate along with the fixture to the wall.
To replace the glass shade, follow steps #1-4 in reverse, skipping step #3. To replace the bulb, follow steps #1-4 in reverse. After securing the fixture to the wall, it is recommended that the top and side gaps, between the wall and the backplate, be sealed with a good quality waterproof caulk or silicone sealant (NOT INCLUDED).
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes.
You will need 1 – Medium Bulb 60 Watts Recommended 100 Watts Max.
(Bulb not included)
USE LED BULBS FOR EXTENDED USE THIS FIXTURE IS WET RATED
DIMENSION
How to Install
- To install the glass shade, separate the Bottom Cage by removing the Nut.
- Insert the Glass Shade into the Bottom Cage.
- Install the bulb into the socket.
- Attach the Bottom Cage to the Top Cage by screwing a Nut securing the two together.
- Attach the Backplate along with the fixture to the wall.
Glass Replacement
Follow instruction steps #1-4, in reverse, skipping step #3.
Bulb Replacement (Bulb not included):
Follow instruction steps #1-4 in reverse
After securing the fixture to the wall, it is recommended that the top and
side gaps, between the wall and theV backplate, be sealed with a good quality
waterproof .a..i ‘ caulk or silicone sealant (NOT INCLUDED).
WARNING : This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.
ASSEMBLY INSTRUCTION
Part Numbers
- A. (1)-Mounting hardware
- B. (1)-Backplate; W4.5″ x H4.5″ x D0.5″; XHX9201MKBKP4.5IN
- C. (1)-Arm
- D. (1)-Loop
- E. (2)-Ball Nut; XHX9201MKBANUT
- F. (1)-Top Cage
- G. (1)-Socket
- H. (1)-Glass Shade; W5.75″ x H6.5″; XHX9201GLA6.5IN
- I. (4)-Nut; XHX9201MKNUT
- J. (1)-Bottom Cage
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>