PIXIE SMS862WF Smart PIR Sensor Outdoor Wall Mount User Guide
- June 12, 2024
- PIXIE
Table of Contents
- PIXIE SMS862WF Smart PIR Sensor Outdoor Wall Mount
- Product Information
- Product Features
- Product Usage Instructions
- Foreword
- Product Introduction
- Specifications
- Installation and Wiring
- Operation and Function
- Trouble shooting
- How to download App
- Warranty
- Scan QR code to get full installation instruction
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PIXIE SMS862WF Smart PIR Sensor Outdoor Wall Mount
Product Information
The PIXIE Smart PIR Sensor Outdoor Wall Mount is a new member of the continuously evolving PIXIE smart home system. It is designed to detect moving infrared sources (typically a person) within its detection field and activate an electrical load, usually turning on a light, in response to that movement. This product offers security and energy management benefits in a wide range of domestic and commercial applications.
The product is equipped with smart sensors, which can operate in three different modes: Motion sensor mode (Auto), Override-On mode (Always on), and Override-Off mode (Always off). It can also work like a Photocell sensor, and switching among these modes is as simple as a tap on the App, a press on a button, or even automatically as per preset schedule.
Product Features
- Smart Passive Infrared Motion (PIR) Sensor Outdoor Wall Mount
- Can detect moving infrared sources (typically a person) within its detection field and activate an electrical load, usually turning on a light, in response to that movement.
- Offers security and energy management benefits in a wide range of domestic and commercial applications.
- Can operate in three different modes: Motion sensor mode (Auto), Override-On mode (Always on), and Override-Off mode (Always off).
- Can also work like a Photocell sensor.
- Easy switching among modes through the App, a button press, or preset schedule.
Package Inclusions
- Sensor base
- Fresnel lens**
- Sensor head
- Adjustable conduit knuckle
Specifications
- Model NO.: SMS862WF/WH/BTAM
- Standby Power: [No value provided in the manual]
Product Usage Instructions
Before installing the product, read the guide and warranty instructions carefully for product performance and safety. The product is designed in accordance with all mandatory international and Australian standards, which require installation by a qualified installer and regular cleaning and maintenance of the equipment.
To use the PIXIE Smart PIR Sensor Outdoor Wall Mount:
- Install the product according to AS/NZS3000 by a qualified installer.
- Clean and maintain the equipment regularly.
- Download and install the PIXIE smart home system App on your smartphone.
- Turn on your smartphone’s Bluetooth, and connect it to the PIXIE smart home system App.
- To switch among modes, tap on the App, press a button, or set a preset schedule.
Note that product data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. The installation instruction is subject to change without prior notice.
Foreword
IMPORTANT: IN THE INTEREST OF PRODUCT PERFORMANCE AND SAFETY PLEASE READ THESE GUIDE AND WARRANTY INSTRUCTIONS BEFORE INSTALLING THE PRODUCT.
SAL products are designed in accordance with all mandatory International and Australian Standards, which require installation in accordance with AS/NZS3000 by a qualified installer and regular cleaning and maintenance of the equipment. Products are sold in accordance with the following instructions and SAL standard terms and conditions of sale, available via www.sal.net.au.
Due to continued product and information updates, product data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. The product wireframe drawings in this document are intended for illustration purposes only and may differ from the final physical product. The installation instruction is subject to change without prior notice.
Product Introduction
PIXIE Smart Passive Infrared Motion (PIR) sensor Outdoor Wall Mount is a new
member of the continuously evolving PIXIE smart home system.
As a PIR sensor, this product is able to detect moving infrared source
(typically a person) that in the detection field, and activate an electrical
load, typically turning on a light, in response to that movement, so as to
achieve security and energy management benefit in a wide range of domestic and
commercial applications.
As a smart sensor, it’s can not only working in three well-known and loved
modes: Motion sensor mode (Auto), Override-On mode (Always on) and Override-
Off mode (Always off), but also can work like a Photocell sensor. Switching
among these modes is as simple as a tap on the App, a press on a button, or
even automatically as per preset schedule.
Product Features
- 3-wire sensor, stable performance
- IP66 weather proof, suitable for outdoor application
- Extra photocell sensor function (Photocell mode)
- Mounting hole distance 84mm, can mount onto normal mounting blocks
- Parameter adjustment can be done in the PIXIE App and on the physical dial.
- Parameter adjustment can be done on the physical dials, and in the App
The package includes
- Smart Passive Infrared Motion Sensor Outdoor Wall Mounting * 1
- Accessory pack (screws, expansion bolts, caps) * 1
- Soft foam pad * 1
- Quick Start Guide *1
Specifications
Model NO. | SMS862WF/WH/BTAM | Input | 220-240V~ 50Hz |
---|---|---|---|
Standby Power | <1W | Load Rating | Incandescent Max. 2000W LED Max. |
500VA
M Fan Motor Max. 120VA
Mounting height| 1.8-2.5m| Detectable Movement Speed| 0.6-1.5m/s
Cut-out (Recessed mount)| 84mm| Detection Angle| 110deg
Warm-up Time| 30 seconds| Detection Range| Max. 12m @24℃
Hold-Time| 10 seconds to 30 minutes| Brightness Threshold| <10 –
2000lux
Ta| -10℃- 40℃| IP| IP66
Operation Humidity| 10%-85% RH, NC| Storage Humidity| 10%-85% RH,
NC
*All drawings shown are for illustration purpose only, actual product may vary due to product enhancement.
**The sensor Fresnel lens is specially designed to give optimum performance.
Do not apply any pressure on it, as this may damage the lens, and adversely
affect the performance of the sensor.
Tip-Walking Direction Matters
The sensor is more sensitive to movement across the sensing pattern, and less
sensitive to movement directly toward to sensor. Please plan the mounting
location wisely!
Tip-Walking Direction Matters
The sensor is more sensitive to movement across the sensing pattern, and less
sensitive to movement directly toward to sensor. Please plan the mounting
location wisely!
Installation and Wiring
Installation advice
- The recommended mounting height is 1.8-2.5 meters to achieve the optimal detection range.
- Avoid objects that may be swayed by the wind, typically but not limited to curtains, tall plants etc. in the sensor detection range
- Avoid aiming the sensor toward high reflective surfaces like mirrors, monitors etc.
- Do not mount the sensor close to objects which can create rapid temperature changes, e.g. air conditioning vents, heaters, lights etc.
Installation direction
This product must be installed by a licensed electrician.
- Switch off the mains power
- Wire the sensor and the loads as per the wiring diagram
- Mount the sensor onto the desired position
- Switch on the mains power
- Test the sensor working
- Adjust the brightness threshold, sensitivity, and hold-time to suitable level
Wiring
The sensor is a 3-wire sensor that requires neutral wire, offering stable
performance. Please wire as per the wiring diagram.
Operation and Function
LED indicator
- LED indicator is built in under the Fresnel lens, it lights up differently in response to different working status.
- There are three color LED indicators: white, blue, and green.
- LED indicator color is white when product is new or has been reset.
- LED indicator color can be blue or green after product is added to a network, depending on working status.
- The LED indicator can be turned off after the sensor being added to the App.
Key parameters: Hold-time, brightness threshold and Sensitivity
The sensor has three key parameters that need to be set according to the
application requirements: Hold-time, brightness threshold and sensitivity.
They can be adjusted on the dials under the sensor head: the dial with a clock
icon is for hold-time, the dial with a sun icon is for brightness threshold,
and the dial with a human icon is for sensitivity. They can also be adjusted
in the App, after the sensor being added into the App.
Hold-time
The brightness threshold adjustment makes the sensor activate the load
depending on the ambient brightness when there is movement detected in the
detection range. The adjustment can be set to allow the sensor to activate the
load all day (under full daylight) when movement is detected, or only to
activate the load when the ambient brightness is below a certain level upon
detection of movement. For example, the user can ensure the load is only
activated when movement is detected at night time, while in the day time there
is adequate natural daylight, the sensor does not respond to movements in the
detection range to activate the load, as it is unlikely to be necessary for
typical energy saving considerations.
Rotate the dial clockwise toward “sun” to increase the brightness threshold,
when the adjustment is fully clockwise and the arrow is pointing at the “sun”,
the motion sensor will activate the load upon detection of movement all day
regardless of ambient brightness. Rotate the dial anti-clockwise toward the
“moon“ to decrease the brightness threshold, when the adjustment is fully
anti-clockwise and the arrow is pointing at the “moon”, the motion sensor only
activates the load upon detection of movement in the dark.
Brightness threshold
The brightness threshold adjustment makes the sensor to activate the load
depending on the ambient brightness when there is movement detected in the
detection range. The adjustment can be set to allow the sensor to activate the
load all day (under full daylight) when movement is detected, or only to
activate the load when the ambient brightness is below a certain level upon
detection of movement. For example, the user can ensure the load is only
activated when movement is detected at night time, while in the day time there
is adequate natural daylight, the sensor does not respond to movements in the
detection range to activate the load, as it is probably not necessary to do so
for energy saving consideration.
Rotate the dial clockwise toward “+” to increase the brightness threshold,
when the adjustment is fully clockwise and the arrow is pointing at the “+”,
the motion sensor will activate the load upon detection of movement all day
regardless of ambient brightness. Rotate the dial anti-clockwise toward the
“-“ to decrease the brightness threshold, when the adjustment is fully anti-
clockwise and the arrow is pointing at the “-”, the motion sensor only
activates the load upon detection of movement in the dark.
Sensitivity
The sensitivity adjustment changes the sensor detection range. The higher the
sensitivity is, the movement from longer distance away can be detected.
Rotate the dial clockwise toward “+” to increase the sensitivity. Rotate the
dial anti-clockwise toward the “-“ to decrease the sensitivity.
Working modes
Four working modes are built in the sensor:
Motion sensor mode (or namely Auto mode): When the ambient brightness
corresponds to brightness threshold setting, the sensor is monitoring infrared
source movements in the detection field. The load is turned on when movement
is detected, and the load is turned off when there is no more movement
detected within hold-time
- Override-On mode (or namely Always-On mode): The load is always kept ON regardless infrared movements in the detection range
- Override-Off mode (or namely Always-Off mode) : The load is always kept OFF regardless infrared movements in the detection range
- Photocell mode (or namely PE sensor function): The load is always kept ON when the ambient brightness is lower than brightness threshold setting, and always kept OFF when the ambient brightness is higher than brightness threshold setting, regardless of infrared movements in the detection range
Before being added to the App, the sensor works in Motion sensor mode by default.
After being added into the App, the sensor can work in all 4 modes, see below for how to switch modes
| Option 1| Option 2| Option 3
---|---|---|---
How to switch to Override-On mode| Via the App,
in the sensor control page
| Via a paired PIXIE secondary device, double press the button|
–
How to switch to Override-Off mode
| Via the App,
in the sensor control page
| Via a paired PIXIE secondary device, triple press the button|
–
How to switch to Photocell mode
| Via the App,
in the sensor control page
| Via a paired PIXIE secondary device, six press the button|
–
How to return to Motion sensor mode
| Via the App,
in the sensor control page
| Via a paired PIXIE secondary device, single press the button| Switch off the power to the sensor, wait for 10 seconds, then resupply power to the sensor
Warm-up
When power is supplied to the sensor, the LED indicator of the sensor will
flash slowly for 20-30 seconds. During this period, the load is kept at ON
status regardless of motion or ambient brightness. This is warm-up process of
the sensor, to get ready for the functionalities. When the LED indicator stops
flashing, and the load is turned OFF, the warm-up process is finished. After
warm-up, the sensor will always enter Motion sensor mode as default setting.
Function and LED indicator response
Motion sensor mode.
Scenario| Ambient brightness| Load response| LED
Indicator| Remark
---|---|---|---|---
When movement is detected
|
Below the threshold
|
The load is turned on, and kept on during the hold-time
|
Flash once
| If there is no new movement detected, the load will be turned off when hold-
time elapse
When a new movement is detected within the duration of the last
detection| Below the threshold| The load is kept on, the hold-time timer
restarts from the new signal| Flash once| Hold-time is added continually
When movement is detected
|
Above the threshold
|
No response, stays at OFF
|
No response, stays at OFF
| The sensor will not respond to infrared source movement when ambient
brightness is higher than threshold setting
When there is no movement detected| NA| Stays at OFF| Stays at OFF| The
sensor is on standby
Override-On mode and Override-Off mode
Scenario | Load response | LED Indicator | Remark |
---|
Override-On mode
|
The load is kept on
|
Stays at green
| The load is always on regardless of movement or ambient brightness
Override-Off mode
|
The load is kept off
|
Stays at blue
| The load is always off regardless of movement or ambient brightness
Photocell mode
| The load is off when the ambient brightness is higher than preset brightness threshold; The load is kept on when the ambient brightness is higher than preset brightness threshold|
Keeps flashing every 5 seconds
|
The load is always off regardless of movement or ambient brightness
Sensor detection range
Work with PIXIE secondary devices
The sensor can pair and work with three PIXIE secondary devices*: SMF/BTAS,
SMRM/BTAS, SMRP/BTAS
Note:** Pairing operation is only available in the App. Please add the
sensor into the App before commencing pairing operation.
Operation on a paired PIXIE secondary device and correspondent functions on
the sensor
- Single press: Switch the sensor to Motion sensor mode
- Double press: Switch the sensor to Override-On mode
- Triple press: Switch the sensor to Override-Off mode
- Six press: Switch to Photocell mode
Test and configuration
Option 1-Test and configure in the App (Recommended)
- Supply power to the sensor, after 30 seconds’ warm-up, the sensor is ready to operate
- Add the sensor into the SAL PIXIE or PIXIE PLUS App
- Follow the step-by-step guide in the App to finalize the configuration of the sensor
Option 2-Test and configure manually
-
Turn the TIME dial to full clockwise to the minimum, which is 10 seconds set
-
Turn the LUX dial to full clockwise to the ‘Sun’ icon, which is the maximum
( Note: When testing the sensor under daylight, please always turn LUX dial to the maximum position, otherwise the sensor will not operate) -
Turn the SENS dial to full clockwise, which is maximum
-
Adjust the sensor head to desired direction
-
Supply power to the sensor, after 30 seconds’ warm-up, the sensor is ready to operate
-
Walk slowly around the desired detection field, to confirm the load is activated upon movement from within the desired detection field
-
Set the brightness threshold to the desired level
-
Set the hold-time to the desired time for normal operation
-
Set the sensitivity to desired level
-
Adjust the sensor head direction if necessary
Trouble shooting
The connected load does not operate
- Check if the connected power source and load is correct
- Check if the settings of connected load correspond to ambient light
The sensitivity is poor
- Please check if there is any hindrance in front of the sensor to affect it to receive the infrared signals
- Check if the ambient temperature is too high
- Check if the infrared source is in the desired detection field
- Check if the installation height corresponds to the height required in the instructions
- Check if the infrared source moving direction is crossing the sensing pattern, or toward the sensor
The sensor does not turn off the connected load automatically
- Check if there is continual infrared source moving in the detection field
- Check if the hold-time is set to the maximum
- Check if the sensor is set to work at Override-On mode
- Check the wiring if the load is connected to constant power
How to download App
Scan QR code or go to App store (IOS) or Google Play
(Android) to download the free PIXIE app to your smart phone.
IOS: Requires IOS 6.0 or later. Compatible with iPhone, iPad and iPad
touch
Android: Requires Android 4.4 or above, devices must support Bluetooth
4.0 Specifications above are for reference only and may vary without prior
notice.
Warranty
In accordance with SAL’s standard terms and conditions of sale, SAL warrant
this product to be free from defects in materials and or workmanship for a
period as stated below for goods not subject to incorrect installation,
maintenance, operation, mishandling, environmental, unauthorized modifications
or electrical operating conditions outside the nominated product specification
as detailed in these installation instructions.
The benefits to you given by this warranty are in addition to other rights and
remedies you have under law. Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
Warranty term – Residential usage (12) months, Commercial usage (12) months
How to make a claim?
Step #1 – Within 30 days of the fault discovery, please contact the
original place of the SAL product purchase during standard (local) business
hours, with the following information (a) proof of purchase (b) description
and quantity of the claimed fault (c) address of installation. (d) operating
hours of the product.
Step #2 – It is then the responsibility of the original place of product
purchase to report the matter to SAL aftersales;
NSW | ACT| SAL| National Pty Ltd, 40 Biloela Street Villawood NSW| 2163| | P #
02 9723 3099
---|---|---|---|---
QLD| SAL| National Pty Ltd, 36 Whitelaw Place Richlands QLD| 4077| | P # 07
3879 5999
VICT | TAS | SA | NT| SAL| National Pty Ltd, 46-48 Keys Road Moorabbin
Victoria| 3189| | P # 03 9532 3168
WA| SAL| National Pty Ltd, 29 Beringarra Av Malaga WA| 6090| | P # 08 9248
7458
Step #3 – Upon review of your claim and if the product is required to be
returned to SAL for technical evaluation, then at the owners expense the
product must be returned to SAL as per the above nominated locations.
Step #4 – Pending the evaluation, the claim will be validated resulting
in the product being repaired or replaced with the same or best equivalent
product at the discretion of SAL, or rejected if the product fault was found
to be caused by conditions beyond the responsibility of SAL warranty
obligations. Consideration of installation, product removal, return freight
and or testing fees are not the responsibility of SAL.
Scan QR code to get full installation instruction
Option 2-Test and configure manually
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>