PIXIE SMRM Multifunction Remote Control Mech Instruction Manual
- June 3, 2024
- PIXIE
Table of Contents
Multifunction
Remote Control Mech
SMRM/BTAS
Installation Instructions
SMRM Multifunction Remote Control Mech
WARNING
KEEP OUT OF REACH OF CHILDREN
Swallowing can lead to chemical burns, perforation of soft tissue, and death.
Severe burns can occur within 2 hours of ingestion. Seek medical attention
immediately.
**** This product is a professional product and must be installed by a licensed electrician.
Product Introduction
The PIXIE Multifunction Remote Control Mech is the 3rd generation multifunction remote control, that can be installed on switch plates to blend perfectly into the home environment. Without the need for running wires, this product brings huge flexibility for the application and installation.
1.2 Product Parts
1.1 Product Features
- Coin battery powered, install anywhere without worrying about wiring availability
- Designed for wall installation like normal Australian switch mechs, blends well with interior design.
- Fit into most Australian switchplates
- Max. 3 gang installation
- LED indicator color selectable – blue or amber
- PIXIE Multifunction Remote Control Gen 3, can pair with a master device, a group or scenes
Specifications and Capabilities
Product Description| Model NO.| Battery| Colour|
Dimensions L x W x H (mm)| Weight (g)
---|---|---|---|---|---
PIXIE Multifunction Remote Control Mech| SMRM/BTAS| CR2032 * 2| Blue| 45 x
24.5 x 19| 17
Product Application| Interior residential or commercial| Product
Installation| Wall mount
---|---|---|---
Operating Ambient Temperature| 0℃- 40℃| Storage Ambient
Temperature| 0℃- 60℃
Operating Humidity| 0-85% RH, NC| Storage Humidity| 0-85% RH, NC
IP Rating| IP20|
Installation process
3.1 Pull out the insulation insert
3.2 Fit the PIXIE Multifunction Remote Control Mech onto a compatible switch
plate
3.3 Mount the switch plate to the desired wall surface
3.4 Pair the PIXIE Multifunction Remote Control Mech with a master device, a
group or a scene in the PIXIE system
Operations
4.1 Setting operations
| **Operation** | **Function** | **LED Indicator** | **Remark** |
|---|---|---|---|
| **4 Clicks** | **** Enter pairing mode, the mode lasts 10 seconds | **** | |
| Quickly flash in blue for 10 seconds | – Can pair with a PIXIE master device, |
a group or two scenes
– After a successful pairing, pairing mode will end. Pressing the button
during pairing mode will cancel and exit pairing mode
– LED indicator will flash twice, and stay solid blue for 2 seconds to
indicate the pairing is successful
**5 Clicks| Change the LED indicator color| ** _| Toggle LED
indicator color selectable – blue or amber
**9 Clicks**| Reset the product to factory default| Slowly flash ble for
3 seconds| All the previous pairings will be cleared after a successful reset
4.2 Control operations – paired with a master device
Operations when configured to control a device
Paired device Operation| PIXIE Smart Dimmer| PIXIE
Smart RGB Strip, RGB Strip Controller| PIXIE Smart Single Color
Strip, Single Color Strip Controller
---|---|---|---
1 Click| Turn ON/OFF.
When turning the light on, it will work on the last used brightness setting|
Turn ON/OFF.
When turning the light on, it will work on the last used brightness setting|
Turn ON/OFF.
When turning the light on, it will work on the last used brightness setting
2 Clicks
| Shortcut to the maximum brightness| Shortcut to the maximum brightness|
Shortcut to the maximum brightness
3 Clicks| Switch to the next color temperature, which circulates in Warm
White->Cool White-> Daylight. For S9842 downlight only.| Switch to the next
color. Color circulates in
White->Red->Green->Blue.| NA
Long Press| When the light is on, long press the button to dim up or
down, and release the button to stop.
When the light is off, long press the button to turn on the light at minimum
brightness and increase brightness and release the button to stop.| When the
light is on, long press the button to dim up or down, and release the button
to stop.
When the light is off, long press the button to turn on the light at minimum
brightness and increase brightness and release the button to stop.| When the
light is on, long press the button to dim up or down, and release the button
to stop.
When the light is off, long press the button to turn on the light at minimum
brightness and increase brightness and release the button to stop.
4.3 Control operations – paired with a group
Operations when configured to control a group
| Operation | Result | Remark |
|---|---|---|
| 1 Click | Turn ON/OFF the Group | NA |
| 2 Clicks | Shortcut to the maximum brightness | Dimmable product group |
only
3 Clicks| Switch color/color temperature| Subject to the product group
functionality
Long Press| Switch color/color temperature| Dimmable product group only
4.4 Control operations – paired with scenes
Operations when configured to control scenes
| Operation | Result |
|---|---|
| 1 Click | Activate scene 1 |
| 2 Clicks | Activate scene 2 |
Scan the QR code or go to the App store (IOS) or Google Play (Android) to download the free PIXIE app to your smartphone. IOS: Requires IOS 6.0 or later. Compatible with iPhone, iPad, and iPad touch Android: Requires Android 4.4 or above, devices must support Bluetooth 4.0 Specifications above are for reference only and may vary without prior notice.
https://www.pixie.app/download/pixie/
https://www.pixie.app/download/pixieplus/
Warranty – In accordance with SAL’s standard terms and conditions of
sale, SAL warrant this product to be free from defects in materials and or
workmanship for a period as stated below for goods not subject to incorrect
installation, maintenance, operation, mishandling, environmental, unauthorized
modifications or electrical operating conditions outside the nominated product
specification as detailed in these installation instructions. The benefits to
you given by this warranty are in addition to other rights and remedies you
have under the law. Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
Warranty term – Residential usage (12) months, Commercial usage (12)
months, Replaceable lamps (where supplied) (12) months, and batteries where
supplied (12) months from the date of purchase.
How to make a claim?
Step #1 – Within 30 days of the fault discovery, please contact the original
place of the SAL product purchase during standard (local) business hours, with
the following information (a) proof of purchase (b) description and quantity
of the claimed fault (c) address of installation. (d) operating hours of the
product.
Step #2 – It is then the responsibility of the original place of the
product purchase to report the matter to SAL aftersales;
NSW | ACT| SAL National Pty Ltd, 40 Biloela Street Villawood NSW 2163| | P #
02 9723 3099
---|---|---
QLD| SAL National Pty Ltd, 36 Whitelaw Place Richlands QLD 4077| | P # 07 3879
5999
VICT | TAS | SA | NT| SAL National Pty Ltd, 46-48 Keys Road Moorabbin Victoria
3189| | P # 03 9532 3168
WA| SAL National Pty Ltd, 29 Beringarra Av Malaga WA 6090| | P # 08 9248 7458
Step #3 – Upon review of your claim and if the product is required to be
returned to SAL for technical evaluation, then at the owner’s expense the
product must be returned to SAL as per the above-nominated locations.
Step #4 – Pending the evaluation, the claim will be validated resulting
in the product being repaired or replaced with the same or best equivalent
product at the discretion of SAL, or rejected if the product fault was found
to be caused by conditions beyond the responsibility of SAL warranty
obligations. Consideration of installation, product removal, return freight,
and or testing fees are not the responsibility of SAL.
- The product wireframe drawings in this document are intended for illustration purposes only and may differ from the final physical product.
- The installation instruction is subject to change without prior notice.
- NO DIY, installed by a licensed electrician only.
PIXIE is a trademark of SAL National Pty Ltd.
COPYRIGHT © 2022 This document is copyrighted by SAL National Pty Ltd.
Except as permitted under the relevant law, no part of this application note
may be reproduced by any process without written permission or an
acknowledgment to SAL National.
DISCLAIMER: SAL National reserves the right to alter the specifications,
designs, or other features of any items and to discontinue any items at any
time without notice and without liability. While every effort is made to
ensure that all information in this application note is correct, no warranty
of accuracy is given and SAL National shall not be liable for any error.
TRADEMARKS: The identified trademarks and copyrights are the property of
SAL National ty Ltd unless otherwise noted.
Contact Information
SAL National Pty Ltd.
Web:www.sal.net.au
ABN: 21 633 189 474
All Enquiries:
+61 2 9723 3099
pixiesupport@sal.net.au
Documents / Resources
|
PIXIE SMRM Multifunction Remote Control
Mech
[pdf] Instruction Manual
SMRM, BTAS, SMRM Multifunction Remote Control Mech, SMRM, Multifunction Remote
Control Mech, Remote Control Mech, Control Mech, Mech
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>