SUNCO LIGHTING B07VZXTGBT 4 Inch Slim LED Downlight Installation Guide

SUNCO’S 4” SLIM DOWNLIGHT
Install Guide and Manual
The Brighter Choice

COMPONENTS

IC Rated
Junction Box

EASY INSTALLATION

1. Turn off circuit breaker that provides power to the light switch for the recessed lights.

2. Cut a hole in the ceiling in the desired location accordingly to the dimension indicated.

3. Run an electrical wire from the power source (switch) through the mounting hole.

4. Open the junction box and remove the appropriate knockout(s) on the side plate.

5. Connect the supply wires to the junction box wires using the wire nuts provided.
   •White to white
   •Black to black

6. Tuck the connected wires inside the junction box and close the cover.

7. Connect the junction box to the slim-down light.
   Tighten the connector by hand.

8. Insert junction box through the hole in the ceiling.
   • New construction applications: Hardwire box shall be secured to studs, joists, or similar fixed structural units.
   • Remodel applications: Do not require the hardwire box to be firmly secured after the mounting plates studs, joists, or structural units have been concealed.

9. Push up the spring clips to insert the luminaire in the opening in the ceiling.

10. Turn on the circuit breaker and test the light.

WARNING
All electrical connections must be in accordance with local and National Electric Code (N.E.C.) standards. Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections. Please review these instructions carefully before proceeding.
WARNING: Risk of fire or electric shock. Do not alter, relocate or remove wiring during installation.
WARNING: Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.

SPECIFICATIONS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>