YeeSite 54 Mini Strober Light Instruction Manual
- June 15, 2024
- YeeSite
Table of Contents
MINI STROBE LIGHT
User Manuel PROFESSIONAL LED
PROFESSIONAL LIGHTING
Product Introduction:
The device has the advantage of fashionable outline, compact size and light in weight. It adopts 54 pes 5050 SMD LED as lighting source, with strong points of high brightness, long operation lifetime and low power consumption. It can realize the effect of fade, strobe, jump and speed adjustment. With sound controlled function, the dynamic effect would be altered according to rhythm of music.
Instruction:
After unpacking, please check whether the projector has been damaged by
transport such as screw loosening, reflecting mirror broken, etc.
Check before electrification. Check whether the projector has been laid
correctly and stably, whether the voltage of the power is adapted to the
requirement, otherwise we’ll not be responsible for the damage of the light.
This projector is the first class protected equipment.
Notice that while using the green and yellow wires have to connect to the
ground properly by professionals. Please examine the electrics and voltage
before powering on it. We suggest customers apply for a voltage regulator of
110v to keep supplied power steady. It’ll check itself in seconds after being
electrified, could be used.
Technical Parameters:
Voltage: AC110-240V,50/60Hz
Power: 10W
Light Source: 54PCS*0.2W SMD5050 RGB LED
Color : Red/Green/Blue/Rose/Amber/Cyan/White…
Play Mode: Auto, Sound Activated, Remote Control
Feature:
- Can stand-alone or hanged on.
- The average service life of LEDs reach 100000 hours.
- Unique optics design system, low power consumption, super luminance.
Manufacture’s Limited Warranty
Warranty Period:
The warranty period starts at the time of Product’s original purchase by
the first end-user. The product may consist of several different parts and
different parts may be covered by a different warranty. they are: Twelve (12)
months for the lighting which include in the motor, circuit board, voltage
changer and cable, other than the consumable parts such as lighting source
bulb.
What’s not covered?
This Limited warranty does not cover:
- Effective warranty card is not available when making a claim under the Limited Warranty.
- Product is broken because of improper operation. For example overpower and overwork.
- Product is broken because of transportation and movement. Product is broken detached and maintained by unprofessional person without our permission. Product is broken because operation is not according to the specification Natural or disastrous reason and bad environment. For example: humidity, dusty and unsteady power and so on.
NOTE!
We strongly encourage you to familiarize yourself with the user guide and
instructions provided with and for the product. Pleasc also note that the
product might be scratched or otherwise damaged if not handled very carefully.
All warranty information, product features and specifications are subject to
change without notice.
IR Remote Control Operation
ON/OFF: Power ON/OFF
Auto: Press to enter auto mode
Jump: Press to enter hopping mode
Fade: Press to enter fade mode
Strobe: Press to directly access the strobe modes, 4 speeds can be
switched.
Sound: Press to directly access the sound activated modes
7 Color: Press to directly access the color you like
Speed: Works when the remote control is in Auto/ Jump/ Fade Press “+” to
increase the speed or “–” to decrease the speed
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>