iottie Volox Magnetic Wireless Charging Air Vent Mount User Manual
- June 6, 2024
- iOttie
Table of Contents
VeloxTM
Magnetic Wireless Charging Air Vent Mount
User Manual
For optimal mounting and charging, please follow the detailed instructions within this manual when using the Velox Magnetic Wireless charging mount.
Product Information
At a Glance
Device Compatibility
Velox products are designed for use with MagSafe Compatible iPhones and cases.
Compatible devices include iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 13
Pro Max, and the iPhone 12 Series.
Product Specifications
| Item | Specification |
|---|---|
| Total Input | DC 9.0V-1.67A |
DC 5.0V-2.0A
Wireless Charger Output| 7.5 W
Cable Length| 4′
Mount Length| 2.22″
Mount Width| 2.61″
Mount Height| 3.58″
Mount Weight| 5 oz.
Car Charger Specifications
| Input | Output |
|---|---|
| DC 12V ~ 24 | DC 5V ~ 3A |
DC 9V ~ 2A
DC 12V ~ 1.5A
- iOttie is not liable for possible damages due to product misuse.
Installing the Magnetic Wireless Charging Mount
Attaching the Air Vent Mount
Simply push the Velox mount onto the blade of your vehicle’s air vent. The
silicon texture of the prongs will ensure that the mount does not fall off
even when driving on rough roads.
* Mount is designed to be used only with FLAT air vent blades.
Connecting to Power
Plug the cable into your vehicle’s 12V power socket by using the included
adaptor.
Alternatively, you may plug the cable into your vehicle’s USB-C outlet.
- The Velox Magnetic Wireless Charger does not have an On/Off switch. Once the cable is plugged in and the vehicle is turned on, the mount will stay on.
Mounting your phone
Simply place your phone against the mount, and the magnets will hold it in
place, charging will start automatically. You are now ready to start driving.
Operation Warnings
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operating temperature: -10-55°C
Operating frequency range: 2402-2480MHz
Rated Power: For Classic: 9.1dBm, BLE: 8.1dBm
Declaration of Conformity: Hereby, iOttie, Inc. declares that the radio
equipment type Velox Magnetic Wireless Charging Air Vent Mount of MGSFIO101 is
in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.iottie.com
This device may be used in each EU member state.
Important Safety Information
This manual contains important safety and operating instructions for the
Velox™ Magnetic Wireless Charging Air Vent Mount (MGSFIO101).
Please read all instructions and safety information before using this product.
If damage occurs as a result of failure to follow the instructions, the
warranty will be voided.
-
Do not expose to rain, moisture, or snow.
-
Using an attachment made or sold by anyone other than the manufacturer is not recommended, doing so may result in an increased risk of fire, electric shock, or injury.
-
Do not operate this magnetic wireless charging mount if it has received a sharp blow, been dropped, or otherwise
damaged in any way; take it to a qualified service person. -
Do not disassemble this magnetic wireless charging mount; take it to a qualified service person when service or repair
is required. Incorrect reassembly may result in electric shock or fire. -
To reduce the risk of electric shock, unplug this car charger before attempting any maintenance or cleaning. Turning off the vehicle controls will not reduce this risk.
-
Avoid extended exposure to direct sunlight, which may damage the device.
-
Exposing this product to open flames may cause it to explode.
-
Do not expose this product to strong magnetic fields.
-
Use a dry, soft lint-free cloth to clean. Do not use any corrosive cleaner or oil to clean.
-
*Always obey traffic laws and pay attention to the road. Do not attempt to use this device while driving.
** This product complies with the radio interference requirements of the
European Community.
** This product is designed and manufactured
with high-quality materials and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling help protect natural resources, human health,
and the environment. For more information on the disposal and recycling of
this product, contact your local municipality, disposal service, or the shop
you bought this product.
Designed in New York City. 20 W 37th St, New York, NY 10018.
Made in China. U.S. Patent Pending ©2021 iOttie. All rights reserved. iOttie
and Velox have registered trademarks owned by iOttie, Inc. John 3:16 Apple,
the Apple logo, iPhone, iPod, iPod touch, Mac, macOS, Magsafe and Siri are
trademarks of Apple Inc., registered in the U.S. and other countries.
The Velox Magnetic Wireless Charging Air Vent Mount is backed by a 2-year warranty.
MagSafe Compatible Only compatible with MagSafe iPhone series and cases.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>