CREATE Wind Prop Ceiling Fan with DC Motor User Manual
- June 3, 2024
- CREATE
Table of Contents
CEILING FAN WITH DC MOTOR
USER MANUAL
Wind Prop Ceiling Fan with DC Motor
Thank you for choosing our ceiling fan. Before using this appliance and to
ensure its best use, please read the instructions carefully.
The safety precautions listed here reduce the risk of fire, electric shock,
and injury when followed correctly. Keep the manual in a safe place for future
reference, as well as the
warranty, purchase receipt and box. If applicable, give these instructions to
the future owner of the appliance. Always follow basic safety instructions and
risk prevention measures when using an electrical appliance. The manufacturer
will not be held responsible for any damage resulting from the user’s failure
to follow these instructions.
PARTS LIST
Carefully open the packaging and remove the parts that are included inside.
Place them on the floor on a rug or a piece of plastic large enough to prevent
any damage.
Check that the items listed below are inside the packaging.
SECURITY INSTRUCTIONS
When using any electrical appliance, the following basic safety precautions should always be observed.
- Please read this manual carefully before starting the installation. Save these instructions.
- In the event of a breakdown or replacement of any part, contact the after-sales service.
- To reduce the risk of any personal injury, attach the fan directly to the supporting structure of the building following these instructions and use only the hardware provided.
- To avoid possible electrical shock, before installing your fan, disconnect power by turning off the power switches in the electrical box and associated wall switches. If it is not possible to turn off the power switches, use a warning device such as a label on the electrical box.
- All cables must meet specifications established by local and national electrical codes and ANSI/NFPA 70. If you are not familiar with electrical installations, consult a qualified electrician.
- To reduce the risk of possible personal injury, do not bend the blade coupling system while installing, tilting, or cleaning the blades. Never insert other objects between the rotating fan blades.
- To reduce the risk of fire, electrical shock, or motor damage, do not use a solid-state speed governor with this fan. Only use original speed regulators.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, provided they are supervised by a person responsible for their safety or have been trained in its use. the device safely. Children must not play with this appliance. They should also not perform cleaning and maintenance tasks unless they are over 8 years old and supervised. Close supervision of children is necessary when using any appliance.
NOTE: The instructions and safety precautions that appear in this manual may not cover all possible problems and situations. You should understand that both common sense and caution are essential in the installation and use of the fan.
INSTALLATION INSTRUCTIONS
- Mark the correct position of the holes and fix the ceiling bracket using the screws with metal anchors or screws and washers appropriate to the type of ceiling chosen.
- Check the correct installation of the bracket before hanging the fan. This plate must support the entire weight of the fan.
INSTALLATION PREPARATION
- To avoid personal injury and injury, make sure that the place where you are going to hang the fan allows the blades to be 2.3 m or more from the ground and 76 cm from
the nearest wall or obstacle.
Make sure the junction box is adequately fastened to the building structure and can support the full weight of the fan. INSTALLING THE MOUNTING BRACKET
- The outlet box and beam must be securely mounted and capable of safely supporting at least the weight of the fan.
- Do not fix the mounting bracket directly on ceilings less than 10mm to avoid the risk of the screw loosening and coming out.
Wood roof
Attach mounting bracket with wood screws and washers at ceiling joints.
Concrete ceiling
Drill the holes with an 8mm drill bit, according to the length of the
expansion bolts. Next, fix the mounting bracket to the ceiling with the
expansion screws.
ENGINE MOUNTING
- Receiver Place: Hook the motor on the left hook, then wire.
Advice: Another person should help you hold the ladder and hand you the fan once you’ve climbed the ladder.
BLADE ASSEMBLY
Align the holes in the motor with the holes in the blades. Secure and tighten
all screws once all blades are installed. Before permanently securing the
screws, repeat with the remaining blade arms.
Advice: To save time, you can put the washers on each screw before you
install the blades. Tighten the blade screws twice.
PATCH PANEL MOUNT, LED PANEL AND THE DECORATIVE SCREEN
-
Unscrew one fixing screw. Fix the patch panel to the bottom of the fan by inserting the other two fixing screw heads into the keyhole slots, rotate it to fit, then secure the previous fixing screw by aligning the screw hole and the keyhole. on the bottom of the fan, tighten the remaining setscrews to secure the connection panel.
-
Connect the single pin plugs on the breakout board to those on the LED panel. The LED panel is magnetized so it attaches to the backplane by simply snapping the two pieces together.
Note: While installing or removing the LED board, be careful not to touch the insulating tabs. Do not overtighten or fasten the screws as this may cause damage to the insulating tabs. -
Thread the decorative shade onto the LED plate and secure with decorative clips and nuts.
CHECK THE INSTALLATION
- Check the correct operation of the fan, checking that there is no strange movement or misalignment in any part of the fan.
- In the event that any type of buzzing/vibration can be noticed, you can adjust the blades with the balance kit that has self-adhesive counterweights and “u” clips. You can put the clip in the center of any blade and check if the vibration decreases.
- Turn on the fan and check. If no change is seen, turn off the fan and add another clip on another blade or use the adhesive weights.
REMOTE CONTROL
Make the connection between the receiver wires and the fan motor wires
following the color indications. Make sure the connection is tight.
Receiver Placement:
- Light
- ON/OFF button
- Fan intensity control
- Timer
- Batteries (2xAAA)
- **Color temperature control
- **Light intensity control
- Reverse function
In compliance with the directives: 2012/19/EU and 2015/863/EU on the restriction of the use of hazardous substances in electrical and electronic equipment, as well as their waste disposal. The crossed bin symbol shown on the packaging indicates that the product at the end of its useful life will be collected as separate waste. Therefore, any product that has reached the end of its useful life should be delivered to waste disposal centers specialized in the separate collection of waste electrical and electronic equipment, or returned to the retailer when purchasing similar new equipment, in one for a base. Proper separate collection for subsequent commissioning of equipment sent for recycling, treatment and disposal in an environmentally compatible manner helps prevent possible negative effects on the environment and health and optimizes recycling and reuse of waste. the components that make up the device. The abusive disposal of the product by the user implies the application of administrative sanctions in accordance with the laws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>