CRYSTORAMA 730-OB-CL-SAQ Eight Light Ceiling Mount Instruction Manual
- October 30, 2023
- CRYSTORAMA
Table of Contents
730-OB-CL-SAQ Eight Light Ceiling Mount
Instruction Manual LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #730-OB-CL-SAQ
730-OB-CL-SAQ Eight Light Ceiling Mount
Crystal Sets
A. 66 Sets. (1)32mm + (1)30mm + (1)58mm Baguette + (1)26mm + (1)24mm + (1)22mm
- (1)18mm + (1)16mm + (1)14mm
B. 33 Sets. (1)32mm + (1)58mm Baguette + (1)24mm + (1)16mm + (1)14mm + (1)12mm
WARNING:
All electrical components must be
installed by a licensed electrician in accordance with the National Electric
Code and the appropriate local electrical codesYou will need 8- Candelabra Base Bulb 40 Watts recommended 60 Watts
Max.
USE LED BULBS FOR EXTENDED USE
The fixture is Dry rated
HOW TO INSTALL:
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
- Place the cross bar over the outlet box and mark the four points on the ceiling at the same distance as between the two holes on cross bar. See illustration on next page.
- Drill the holes at the marked points on the all and insert the wall anchors into the holes.Place the mounting bar over the outlet box and secure with anchor screws.
- Attach the Frame over the mounting bar. After the wire connection is completed, secure with ball nut.
- Screw the stem onto the coupling on the frame and secure with a hex nut. Slide the smaller tube, check ring , metal ring, check ring, larger tube and check ring in that order over the stem.Secure with a hex nut.
- Place the vase cap over the end of the stem and secure with the finial.
- Dress the crystals as illustrated.
WARNING:This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov
Part Number
Part Numbers
A. (2)-Wire Connector
B. (1)-Mounting bar
C. (4)-Wall anchor
D. (4)-Wall anchor screw
E. (4)-Screw
F. (4)-Small hex Nut
G. (4)-Ball nut-XSN724OBBANUT
H. (1)-Frame ; Ø30″ ; 66 pin holes ; with inner plate.
I. (4)-Check ring
J. (1)-Coupling
K. (2)-Hex Nut
L. (8)-Socket
M. (1)-Stem ; H13 3/4″-XSN730OBSTEM13.75IN
N. (1)-Tube ; H6″-XSN730OBSTEM6IN
O. (1)-Tube ; H7″-XSN730OBSTEM7IN
P. (1)-Metal ring ; Ø15″ ; 66 pin holes for up side ; 33 pin holes for lower
side.
Q. (1)-Vase Cap ; Ø5″ ; 33 pin holes-XSN730OBCAP
R. (1)-Finial-XSN730OBFIN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>