TRUE FINE TD60008FL Bohe 15 Inch 2-Light Bohemian Woven Rope Semi-Flush Mount Ceiling Light Instruction Manual

TRUE FINE TD60008FL Bohe 15 Inch 2-Light Bohemian Woven Rope Semi-Flush

Mount Ceiling Light

Product Information

The 2-Light Flush Mount Lighting is a light fixture that can be mounted onto a ceiling. It requires an input voltage of 120V and uses two E26-base bulbs (not included). The lampshade is included in the product packaging.

Product Usage Instructions

1. Wiring Instruction
   • Insert the green grounding screw into the hole with two raised dimples on the mounting bar.
   • Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to the ground wire from the outlet box (if not fixed on the outlet box) using a wire connector (not supplied).
   • If the ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it.
   • NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
   • Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:
   • [GROUP A]: Connect to Black House Wire
   • [GROUP B]: Connect to White House Wire
     [GROUP A]:

Connect to Black House Wire

| [GROUP B]:

Connect to White House Wire

---|---
BLACK| WHITE
PARALLEL WIRE (round & smooth)| PARALLEL WIRE (square & ridged)
WHITE OR GREY WITH TRACER| WHITE OR GREY WITHOUT TRACER
BROWN, GOLD OR BLACK WITHOUT TRACER| BROWN, GOLD OR BLACK WITH TRACER

• Connect the fixture wire(s) from [Group A] evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.
• Fit a wire connector over the wires and screw the connector clockwise until you feel firmness.
• Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
• Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.

2. Assembly Instruction
   • Thread the wire through Metal ring (C), Lampshade (B) and Fix the Mounting strap (H) to the outlet box with Screw (F).
   • Connect the wires according to the picture above.
   • Pass Canopy (E) through the Screw (G) and fix it with Finial (D).
   • Install light bulbs (not included). Use 2 E26-base bulbs.
3. Cleaning
   • To clean, wipe the fixture with a soft cloth.
   • Clean glass with mild soap.
   • Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.
4. Safety Information
   • Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs.

Overview

Product Specifications

• Input voltage 120V
• Rated power 60W MAX × 2
• Lamp socket E26
• Product Packaging
• Fixture body × 1
• Mounting strap × 1
• Metal ring × 1
• Upper half lampshade × 1 & Lower half lampshade × 1
• Screw × 3 & Nut × 3
• Screw × 2 & Wire nut × 3
• Lamp instruction × 1

CONTACT US
E-mail: service@24h-reply.com

References

• Digital Services, Technology and Consulting | Reply

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>