TRUE FINE TD20031CEL 2 Light Ceiling Lighting Instruction Manual
- October 30, 2023
- TRUE FINE
Table of Contents
Instructions Manual
2-Light Ceiling Lighting
Overview
Assembly Instruction
- Fix Mounting strap (F) to outlet box with Screw (E).
- Connect the wires according to the picture above.(Please refer to the wiring instruction for details )
- Place Fixture body (A) onto the outlet box, secure with Screw nut (D).
- Install Bulbs (not included), need two E26 bulbs.
- Peel off the protective cover on acrylic board( C )
- Gently bend acrylic board( C ) a little bit and insert it into the bottom of the fixture and then release it. Adjust it to make it well positioned.
Wiring Instruction
- Insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector (not supplied).If ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it.NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.
- Take note for the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:
[GROUP AI: Connect to Black House Wire| (GROUP BI: Connect to White House Wire
---|---
BLACK| WHITE
PARALLEL WIRE (round & smooth)| PARALLEL WIRE (square & ridged)
WHITE OR GREY WITE TRACER| WHITE OR GREY WITHOUT TRACER
BROWN, GOLD OR BLACK WITHOUT TRACER| BROWN, GOLD OR BLACK WITH TRACER - Take your fixture wire(s) from [Group A] and place evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.
- Fit a wire connector over the wires and screw the connector clockwise until you feel firmness.
- Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps3 and4 as above, and check again for a firm connection.
- Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.
Product Specifications
Input Voltage 120V
Rated Power 60W Max
Lamp Socket E26
Product Packaging
Fixture body x 1
Screw x 2 & wire nut x 3
Acrylic board x 1
Lamp instruction x 1
Cleaning
To clean,wipe fixture with a soft cloth. Clean glass with a mild soap. Do not
use abrasive materials such as scouring pads or powders, steel wool or
abrasive paper.
Safety Information
Always switch off the electricity supply and allow to cool for 10 minutes before changing the light bulbs.
CONTACT US
E-mail: service@24h-reply.com
Print in china
Documents / Resources
| TRUE
FINE TD20031CEL 2 Light Ceiling
Lighting
[pdf] Instruction Manual
TD20031CEL 2 Light Ceiling Lighting, TD20031CEL, 2 Light Ceiling Lighting,
Light Ceiling Lighting, Ceiling Lighting, Lighting
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>