AOSTIRMOTOR A20 20 Inch 500-Watt 36-Volt 13Ah Folding Electric Bicycle Instruction Manual

**AOSTIRMOTOR A20 20 Inch 500-Watt 36-Volt 13Ah Folding Electric Bicycle Instruction Manual

**

Disfay Use Maintenance

Introduction to key functions

OPEN : 1.5 seconds Iong press.
CLOäE: In standby mode, Iong press for 3 seconds.
SETTING : After booting, press for   2.5 seconds.
The detailed settings are as foIIows:(on the boot state)
(The following content, up means , down means )

Light Setting: (P01)

1. UP or DOWN
2. -3 (Brightness)
3. Select, Mode Confirm

MPH/KM Setting: (P02)

1. UP or DOWN
2. MPH or Km/H
3. Select, Mode Confirm

Battery Voltage Setting: (P03)

1. UP or DOWN
2. 24/36/48/6OV(KEEP IN 36V)
3. Select, Mode Confirm

Wheel Diameter Setting: (P06)

1. UP or DOWN
2. 16-28inch (keep in 20 inch)
3. Select, Mode Confirm

Speed Setting:(P08)

1. UP or DOWN
2. 12-4OKM/H (keep in 25 KM/H)
3. Select, Mode Confirm

Accumulative mileage Setting: (P16)

1. As shown in the figure above, accumulates 9 km
2. UP and DOWN
3. Exit Setting

Power Shift Setting:

1. Exit Settings
2. UP/DOWN
3. 1-5 (Power)
4. DefauIt: 1

Front Light Open:

1. Exit Settings
2. UP FOR 3 Seconds
3. Front lamp will work
4. DefauIt: 1

Cruise Mode Setting:

1. Exit Settings
2. PRESS DOWN FOR 3 Seconds
3. DefauIt: 6KM/H
4. Pushing state, non riding

• Ride your bike in a safe way. Don’t hit or knock the display
• Keep away from the bad environments when use, such as downpour, large SN OW flakes and solarization.
• Try not to use in under-voltage condition.
• The screen will gets dark along with the temperature reduction when temperature below -10”C . The screen will return to normal when the temperature rises again.

Controller Use Ma ntenance

1. Battery negative connection line
2. Battery positive connection line
3. Phase line
4. Tail light wire
5. Integrated main line
6. Power sensor line
7. Motor Hall plug wire
8. Please be careful not to get water into the controller box
9. When the bike does not work: 1)Check the connection of controller cables;
10. Try to restart or Replace the controller; 3)Contact us with email

Motor Malntenaance

1. Please check the integrity of motor blocking piece regularly.
2. Please check the integrity of cable before and after riding.
3. Please check the integrity of motor shell before and after riding
4. Please do not use the motor in extreme environments, and do not let the motor work in water.
5. When you find the motor power is insufficient, please get out of the bike and not force it.

FAQ

• Is there a power usage or battery gauge on the bike?

Yes, there is a full screen LCD display. There is also an additional LED battery gauge on the side of the battery pack. 2x the info!

• Is there a switch to prevent accidental starting?

Yes, there is an on/off button on the battery pack. The brake levers also come standard with a safety power stop switch built in.

• How do I lock it up and what can I do to help stolen? minimize the chance

of it being

AOSTIRMOTOR Bike has some great anti-theñ features, including a locking battery rack with keys to keep bike safe, and rear wheel which is bolted down reduce the chances to be stolenMost standard U-locks and cable locks work fine on our AOSTIRMOTOR Ebik

• Does it work in the rain?

The components are all waterproof and work very well in wet conditions, But we do not suggest to use our ebike in a rain day. We suggest that you should keep your bike parked indoors and keep him in a dry situation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>