AOSTIRMOTOR S07-G Electric Bike Owner’s Manual
- October 30, 2023
- AOSTIRMOTOR
Table of Contents
AOSTIRMOTOR S07-G Electric Bike
Using Instructions
- OPEN: Mode/M 1.5 seconds long press.
- CLOSE: In standby mode, long press Mode/M for 3 seconds
- SETTING: After booting, press UP+DOWN for 2.5 seconds(exit in the same way)
- The detailed settings are as follows: (on the boot state)
Wheel Diameter Setting
- UP or DOWN
- 2.16-28inch C Default 26inch)
- Select, Mode Confirm
Speed Setting
- UP or DOWN
- 12-45 KM/H
- Select, Mode Confirm.
Light Setting
- UP or DOWN
- 1-3 (Brightness)
- Select, Mode Confirm
MPH/KM Setting
- UP or DOWN.
- MPH or KM/H
- Select, Mode Confirm
SPEED Setting
- UP or DOWN For 3 seconds
- MAX/AVG/NOW
- Select, Mode Confirm
RANGE Setting
- PRESS Mode/M
- Riding mileage/ accumulated total mileage
Front Light Open
- Exit Settings
- UP FOR 3 Seconds
- Front lamp will work
- Default: 1
Power Shift Setting
- Exit Settings
- UP/DOWN
- 1-5 (Power)
- Default: 1
Cruise Mode Setting
- Exit Settings
- PRESS DOWN FOR 3 Seconds
- Default: 6KM/H
- Pushing state, non riding
- Ride your bike in a safe way. Don’t hit or knock the display.
- Keep away from the bad environments when use, such as downpours, large snowflakes and solarization.
- Try not to use in under-voltage condition.
- The screen will gets dark along with the temperature reduction when temperature below 10 °C . The screen will return to normal when the temperature rises again.
Controller Use & Maintenance
- Battery negative connection line
- Battery positive connection line
- Phase line – EROR 23
- Tail light wire
- Integrated main line
- Power sensor line
- Motor Hall plug wire
Motor Maintenance
- Please check the integrity of motor blocking piece regularly.
- Please check the integrity of cable before and after riding.
- Please check the integrity of motor shell before and after riding.
- Please do not use the motor in extreme environments, and do not let the motor work in water.
- When you find the motor power is insufficient, please get out of the bike and not force it.
FAQ
- Is there a power usage or battery gauge on the bike?
- Yes, there is a full screen LCD display. There is also an additional LED battery gauge on the side of the battery pack. 2x the info!
- Is there a switch to prevent accidental starting?
- Yes, there is an on/off button on the battery pack. The brake levers also come standard with a safety power stop switch built in.
- How do I lock it up and what can I do to help minimize the chance of it being stolen?
- AOSTIRMOTOR Bike has some great anti-theft features, including a locking battery rack with keys to keep bike safe, and rear wheel which is bolted down reduce the chances to be stolen.
- Most standard U-locks and cable locks work fine on our AOSTIRMOTOR Ebike.
- Does it work in the rain?
- The components are all waterproof and work very well in wet conditions,
- But we do not suggest to use our ebike in a rain day.
- We suggest that you should keep your bike parked indoors and keep him in a dry situation.
www.AOSTIRMOTOR.com
aostirmotor@gmail.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>