AOSTIRMOTOR S18-1500W Adults Electric Bike Instruction Manual
- October 30, 2023
- AOSTIRMOTOR
Table of Contents
S18-1500W Adults Electric Bike
Instruction Manual
Product Description
Frame| 6061 aluminum alloy| Battery| 4W 15AH Li-ion
battery SAMSUNG
---|---|---|---
Motor| 1500W rear motor| Controller| 48V 30A
Charge Time| 4-6 hours| Max Speed| 50 km/h
Range Distance| 25-40 km| Brake| F/R disc brake
Light| With Front Light| Display| Color LCD display
Fork| ZOOM| Tire| 26×4.0
Derailleur| Outer 7 speed SHIMANO| Packing Size| 1631’28’82 CM
Safety Notice
To Ensure Your Safety, Make the Following Functional Checks Before Driving:
- Test brake system, throttle, and power system.
- Tire pressure should be at 30 psi.
- Check front wheel lug-nuts, securely tighten before every ride.
- Battery charge level- found on side of battery
- Braking system adjustment and free operation.
Installation Instructions
-
Open your package.
-
Take out the tool box.
-
Take out the bicycle from the package and put it on a soft surface to avoid scratches. Cut the tie that secures the front wheel to the side
-
Remove the protective foam.
-
Open the accessory kit and remove the tool kit
-
Invert the bicycle.
-
Remove the large fixing bolt on the front fork.
-
Put the front wheel on the front fork and place the disc brake pad on the front wheel in the middle of the disc brake caliper( Figure 1).
-
Use the supplied 15mm flat tool to tighten the two bolts.
-
Tie the key to the handlebar clamp, cut the zipper, and then use the Allen wrench in the tool kit to remove the clamp.
-
Place the handlebar in the middle position (Figure 2), install the rod clamp and tighten the screws with the included Allen wrench.
-
Install the LCD-display on the handlebar (Figure 3), tighten the screws, and connect the green connecting wire (Figure 4)
-
Grasp the bicycle light and unscrew the lens. Then, remove the plastic insulator, re-tighten the lens, and then connect the red cable (Figure 5), and connect the bicycle light to the screw above the front fork (Figure 6).
-
Install the pedal. The right pedal rotates clockwise (Figure 7), and the left pedal rotates counterclockwise (Figure 8).
NOTE: Pedal mark “L” means left and “R” means right. -
Vertical bicycle 16. Push the seat into the column, fix it in the desired position, tighten the screws, and then fix it.
-
Installation is complete.When connecting meters, headlights, brake circuit breakers, handlebars, etc., please align them and do not install violently(Figure 4).
Battery Installation & Maintenance
1. Please check the situation of the lock core before installation, Step 2
and Step 3 for details.|
---|---
2. Turn your key counterclockwise to make the lock cylinder downward.|
3. As shown in the left picture, align the slider|
4. There are two lock positions, the locking principle is the same, and the
other lock position can also control the switch of the battery. The No. 3 port
is the charging port|
5. Turn it clockwise to lock your battery.|
6. Press down the key and turn it counterclockwise to unlock your battery.|
- When not using the battery for a long time, please charge it 1-2 times every month.
- Please keep the key properly. If your key is lost, we can provide a new key according to the nameplate number on the key
- Please keep the battery environment dry, for example, do not stay in the rain for a long time
- Please use a universal meter to test the battery attenuation regularly
Display Use & Maintenance
Color LCD display
In the state of power on,press the M button twice(time interval must be within
0.3S),the system will enter the menu parameter setting state,in this
state,users can set the parameters, press M button twice again to quit setting
state(time interval must be within 0.3S).
| |
---|---|---
Brightness:
1. UP or DOWN
2.1-5 (Brightness) 3. Select, M Confirm| Clock:
1. UP or DOWN 2.Year/Month/- Day/Hour/Min/Sec
3. Select, M Confirm| System:
1. UP or DOWN
2.Unit system—Metric/Imperial Power system—.24V-72WUBE
Power indicate—.Percent Noltage Auto assist—,ON/OFF
3. Select, M Confirm
| |
Auto Off:
1. UP or DOWN 2.1-9(default value is 5 minutes)
3. Select. M Confirm| Wheel:
1. UP or DOWN
2.16/18/20/22/24/28/
27/27.5/28/29/30/31/ 32 inch
3. Select, M Confirm| Advance Setting:
1. UP or DOWN
2.default password is ‘1801’.
3. Select, M Confirm
| |
Password:
1. UP or DOWN
2.default password is ‘0000’.
3. Select. M Confirm| Screen Direct:
1. UP or DOWN 2.Change display mode Y/X
3. Select. M Confirm| Exit
- Ride your bike in a safe way. Don’t hit or knock the display.
- Keep away from the bad environments when use, such as downpour, large snow-flakes and solarization.
- Try not to use in under-voltage condition.
- The screen will gets dark along with the temperature reduction when temperature below -10°C. The screen will return to normal when the temperature rises again.
Controller Use & Maintenance
- Battery negative connection line
- Battery positive connection line
- Phase line
- Tail light wire
- Integrated main line
- Power sensor line
- Motor Hall plug wire
1. Please be careful not to get water into the controller box
2. When the bike does not work: 1)Check the connection of controller cables;
2) Try to restart or Replace the controller; 3)Contact us with email
Motor Maintenance
- Please check the integrity of motor blocking piece regularly.
- Please check the integrity of cable before and after riding.
- Please check the integrity of motor shell before and after riding.
- Please do not use the motor in extreme environments, and do not let the motor work in water.
- When you find the motor power is insufficient, please get out of the bike and not force it.
FAQ
• Is there a power usage or battery gauge on the bike?
Yes, there is a full screen LCD display. There is also an additional LED battery gauge on the side of the battery pack. 2x the info!
• Is there a switch to prevent accidental starting?
Yes, there is an on/off button on the battery pack. The brake levers also come standard with a safety power stop switch built in.
• How do I lock it up and what can I do to help minimize the chance of it being stolen?
AOSTIRMOTOR Bike has some great anti-theft features, including a locking battery rack with keys to keep bike safe, and rear wheel which is bolted down reduce the chances to be stolen. Most standard U-locks and cable locks work fine on our AOSTIRMOTOR Ebike.
• Does it work in the rain?
The components are all waterproof and work very well in wet conditions, But we do not suggest to use our ebike in a rain day. We suggest that you should keep your bike parked indoors and keep him in a dry situa- tion.
POWER BRINGS JOY
www.aostirmotor.com
[email protected]