TRUE FINE TD10042W 13 Inch 2-Light Wall Sconce Instruction Manual
- October 30, 2023
- TRUE FINE
Table of Contents
TRUE FINE TD10042W 13 Inch 2-Light Wall Sconce
PACKAGE CONTENTS
- A Fixture 1x
- B Screw 1x
- C Shade 2x
HARDWARE CONTENTS(shown actual size)
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
- MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Times: 25 minnutes
Tools Required for Assembly (not included): Flathead screwdriver, Phillips
screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
ASSEMBLY INSTRUCTIONS
- Install the shade (B) to the fixture body (A) and fix it with screws (C).
- Attach the mounting plate (DD) to the outlet box (not included) with the long mounting screws (CC).
- Strip 3/4 in. of insulation from wire ends. Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.
- Attach wire nuts (BB).Tape wire nuts (BB) and wires together.
- Place fixeture (A) onto the mounting plate (DD). Secure with short mounting screws (AA).
- Install the bulbs (not included), use two E26 bulbs.
Customer Service: service@24h-reply.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>