TRUE FINE TD10038W Dean 24 Inch 3-Light Black Bathroom Vanity Light Instruction Manual
- October 30, 2023
- TRUE FINE
Table of Contents
TRUE FINE TD10038W Dean 24 Inch 3-Light Black Bathroom Vanity Light
Product Information
The 3-Light Vanity Light comes with a fixture (Part A), three glass shades (Part B), six screws (Part C), six semicircle parts (Part D), and a mounting plate. The package also includes two long mounting screws, three wire nuts, and safety information. The product is made in China and requires standard- base light bulbs, which are not included.
Product Usage Instructions
- Before assembling or installing the product, ensure that all parts are present and undamaged by comparing them with the package contents and hardware contents lists.
- Attach the glass shades to the fixture by clamping each shade with a semicircle part and locking it with a screw.
- Attach the mounting plate to the outlet box using the long mounting screws.
- Strip 3/4 inch of insulation from the wire ends, twist the stripped ends together using pliers, and attach the black wire to the power wire and the white wire to the neutral wire. Attach the copper wire to the ground wire and, if necessary, to the grounded outlet box.
- Attach wire nuts to the wires and tape them together.
- Align the two screws through the holes of the back plate and fix them with screw nuts.
- Install three standard-base light bulbs.
Note: The assembly time is estimated to be 25 minutes. Tools required for assembly include a flathead screwdriver, Phillips screwdriver, pliers, electrical tape, wire cutters, and safetyglasses. Helpful tools that are not included are wire strippers and a step ladder. For any queries, contact customer service at service@24h-reply.com.
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Fixture | 1 |
| B | Glass shade | 3 |
| C | Screw | 6 |
| D | Semicircle part | 6 |
HARDWARE CONTENTS
(shown actual size)
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker).
- MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Times: 25 minnutes
Tools Required for Assembly (not included): Flathead screwdriver ,
Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses.
Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: service@24h-reply.com
ASSEMBLY INSTRUCTIONS
-
Put glass shade (B) onto fixture (A), clamp the glass shade (B) with semicircle part (D), and finally lock it with screw (C).
-
Attach the mounting plate (DD) to the outlet box (not included) with the long mounting screws (CC).
Hardware Used
Long mounting screw
Mounting plate
-
Strip 3/4 in. of insulation from wire ends. Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint:
If necessary, attach copper ground wire to grounded outlet box. -
Attach wire nuts (BB).Tape wire nuts (BB) and wires together.
Hardware Used
Wire nut
-
Align the 2 screws(AA) through the holes of the back plate, and fix them with screw nuts.
Hardware Used
Long mounting screw
Mounting plate -
Install light bulbs (not included). Use three standard-base bulbs.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>