LANCOM GS-3652X Fully Managed Access Switches User Guide
- October 30, 2023
- LANCOM
Table of Contents
LANCOM GS-3652X Fully Managed Access Switches
Product Information
The LANCOM GS-3652X is a high-performance switch designed for use in large networks. It has a total of 52 ports, including 36 TP Ethernet ports with speeds of 10M / 100M / 1G and 12 TP Ethernetports with speeds of 100M / 1G / 2.5G. It also has 4 SFP+ ports with speeds of 1G / 10G. The switch features a robust metal housing with removable mounting brackets for easy installation in a 19-inch rack. It comes with a serial configuration cable and an IEC power cord.
LED Description
- System: off (device switched off), green (device operational), red (hardware error)
- Reset button: ~5 sec. pressed (device restart), pressed until all port LEDs glow (configuration reset and device restart)
- TP Ethernet ports 10M / 100M / 1G: off (port inactive or disabled), green (link 1000 Mbps), green blinking (data transfer, link 1000 Mbps), orange (link < 1000 Mbps), orange blinking (data transfer, link < 1000 Mbps)
- TP Ethernet ports 100M / 1G / 2.5G: off (port inactive or disabled), green (link 2500 – 1000 Mbps), green blinking (data transfer, link 2500 – 1000 Mbps), orange (link < 1000 Mbps), orange blinking (data transfer, link < 1000 Mbps)
- SFP+ ports 1G / 10G: off (port inactive or disabled), blue (link 10 Gbps), blue blinking (data transfer, link 10 Gbps), green (link 1 Gbps), green blinking (data transfer, link 1 Gbps)
Technical Details
- Number of fans: 1
- Power supply: internal power supply unit
- Housing: robust metal housing, 1 HU with removable mounting brackets for 19-inch installation, network connectors on the front, 442 x 44 x 300 mm (W x H x D)
Package Content
- Mounting brackets: 2 19-inch brackets for rack mounting
- Cables: 1 IEC power cord, 1 serial configuration cable (1.5 m)
Product Usage Instructions
Before initial startup, please read the enclosed installation guide for information regarding the intended use of the switch.
Connecting the Configuration Interface
To configure or monitor the switch, connect the configuration interface via the included serial configuration cable to the serial interface of the device you want to use.
Connecting Ethernet Interfaces
To connect your PC or a LAN switch to the TP Ethernet interfaces:
- Use Ethernet cables to connect interfaces 1 to 36 for speeds of 10M / 100M / 1G.
- Use Ethernet cables to connect interfaces 37 to 48 for speeds of 100M / 1G / 2.5G.
Connecting SFP+ Interfaces
To insert suitable LANCOM SFP modules into the SFP+ interfaces:
- Insert the module into interfaces 49 to 52.
- Choose cables that are compatible with the SFP modules and connect them as described in the module’s documentation.
Supplying Power to the Device
To supply power to the device:
- Connect the IEC power cable supplied or a country-specific LANCOM Power Cord to the power connector on the device’s backside.
- Before connecting the power supply, connect to the earth to avoid high touch current.
OVERVIEW
-
Configuration interface (Console)
Connect the configuration interface via the included serial configuration cable to the serial interface of the device you want to use for configuring/monitoring the switch. -
TP Ethernet interfaces 10M / 100M / 1G
Use Ethernet cables to connect interfaces 1 to 36 to your PC or a LAN switch. -
TP Ethernet interfaces 100M / 1G / 2.5G
Use Ethernet cables to connect interfaces 37 to 48 to your PC or a LAN switch. -
SFP+ interfaces 1G / 10G
Insert suitable LANCOM SFP modules into the SFP+ interfaces 49 to 52. Choose cables that are compatible with the SFP modules and connect them as described in the module’s documentation. -
Power connector (device back side)
Supply power to the device via the power connector. Please use the IEC power cable supplied or a country-specific LANCOM Power Cord. -
ATTENTION : High touch current possible! Connect to Earth before connecting the power supply
SPECIFICATION
- System
- System: off Device switched off
- System: green Device operational
- System: red Hardware error
- Reset button
- ~5 sec. pressed Device restart
- Pressed until all port
- LEDs glow
- Configuration reset and device restart
- TP Ethernet ports 10M / 100M / 1G
- Off Port inactive or disabled
- Green Link 1000 Mbps
- Green, blinking Data transfer, link 1000 Mbps
- Orange Link < 1000 Mbps
- Orange, blinking Data transfer, link < 1000 Mbps
- TP Ethernet ports 100M / 1G / 2.5G
- Off Port inactive or disabled
- Green Link 2500 – 1000 Mbps
- Green, blinking Data transfer, link 2500 – 1000 Mbps
- Orange Link < 1000 Mbps
- Orange, blinking Data transfer, link < 1000 Mbps
- SFP+ ports 1G / 10G
- Off Port inactive or disabled
- Blue Link 10 Gbps
- Blue, blinking Data transfer, link 10 Gbps
- Green Link 1 Gbps
- Green, blinking Data transfer, link 1 Gbps
Hardware
- Power supply Internal power supply unit
- Environment Temperature range 0–40° C; humidity 10–90%; non-condensing
- Housing Robust metal housing, 1 HU with removable mounting brackets for 19“ installation, network connectors on the front, 442 x 44 x 300 mm (W x H x D)
- Number of fans 1
Interfaces
- ETH 36 TP Ethernet ports 10 / 100 / 1000 Mbps 12 TP Ethernet ports 10 / 100 / 2500 Mbps
- SFP+ 4 SFP+ ports 1 / 10 Gbps 52 concurrent ports in total
Package Content
- Mounting brackets 2 19” brackets for rack mounting; If an additional rear support surface is required for more stable mounting of the switch, please use the LANCOM Switch Rack Mount L250, item no.: 61432, which is available as an accessory.
- Cables IEC power cord, 1 serial configuration cable 1.5 m
Before initial startup, please make sure to take notice of the information
regarding the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a
nearby power socket that is freely accessible at all times.
The power plug of the device must be freely accessible.
Please note that support for third-party accessories (SFP and DAC) is not
provided.
Please observe the following when setting up the device
- For devices to be operated on the desktop, please attach the adhesive rubber footpads
- Do not rest any objects on top of the device
- Keep all ventilation slots on the side of the device clear of obstruction
- Mount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets. If an additional rear support surface is required for more stable mounting of the switch, please use the LANCOM Switch Rack Mount L250, which is available as an accessory.
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen,
declares that this device is in compliance with Directives 2014/30/EU,
2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006.
The full text of the EU Declaration of Conformity is available at the
following Internet address: www.lancom-systems.com/doc
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are
registered trademarks. All other names or descriptions used may be trademarks
or registered trademarks of their owners.
This document contains statements relating to future products and their
attributes. LANCOM Systems reserves the right to change these without notice.
No liability for technical errors and / or omissions
References
- Business network solutions "engineered in Germany": LANCOM Systems GmbH
- DoC - LANCOM Systems GmbH
- LANCOM Management Cloud (LMC): LANCOM Systems GmbH
- LANCOM SFP modules: LANCOM Systems GmbH