LANCOM XS-6128QF Switch Slide-In Rails Instructions
- October 30, 2023
- LANCOM
Table of Contents
LANCOM XS-6128QF Switch Slide-In Rails
The LANCOM Switch Slide-In Rails are a set of mounting rails designed to mount your LANCOM switch to a rack. These rails allow you to easily slide your switch in and out of the rack for maintenance or upgrades.
Mounting Instructions:
- Start by mounting the two rear guides by fastening them to the rear of the switch through the specified holes using 4 of the 16 enclosed countersunk head fastening screws on each side.
- Next, mount the two front mounting brackets to the front sides of the switch. To do this, use the 8 remaining enclosed countersunk screws.
- Position the switch in the rack from the front. First, fasten the front mounting brackets to the rack with 2 rack mounting screws each while supporting the switch in the rear area.
- With the switch supported, slide the rear rails into the guides from behind and screw them to the rack with 2 rack mounting screws each.
Following these instructions will ensure that your LANCOM switch is securely
mounted to your rack using the LANCOM Switch Slide-In Rails. If you have any
questions or concerns, please refer to your LANCOM switch user manual or
contact our customer support team for assistance.
LANCOM Systems GmbH
Adenauerstr. 20/B2
52146 Wuerselen
Germany
[email protected]
www.lancom-systems.com
References
Read User Manual Online (PDF format)
Loading......