LANCOM Systems 1926VAG-5G SD-WAN Router User Guide

LANCOM Systems 1926VAG-5G SD-WAN Router

Mounting & connecting

1. 5G antenna connectors
   Connect the supplied cellular antennas to the connectors MAIN / AUX or MIMO1 / MIMO2 at the front of the device.

2. **G.FAST / VDSL / ADSL interfaces***
   If required, use the supplied DSL cables for the IP-based line to connect each G.FAST / VDSL / ADSL interface to a separate provider’s telephone socket. For more information, please contact your Internet service provider.

• Please use the appropriate cables depending on the design 3. WAN 1 interfaces (SFP / TP combo port)

  • Insert a suitable SFP module (e.g. 1000Base-SX or 1000Base-LX) into the SFP port. Choose a cable compatible with the SFP module and connect it as described in the module’s documentation. SFP modulel and cable are not included.
  • If desired, alternatively connect the WAN 1 TP interface to a WAN modem using an ethernet cable.

  4. WAN 2 interface (TP)
     Connect the WAN 2 interface to a WAN modem using an Ethernet cable.

  5. Ethernet interfaces
     Use the cable with the kiwi-colored connectors to connect one of the interfaces ETH 1 to ETH 4 to your PC or a LAN switch.

  6. Analog interfaces
     Connect analog terminal devices to the analog interfaces either directly via RJ11 or with the help of the enclosed TAE adapters.

  7. ISDN interfaces

     • ISDN 1: Internal (NT) ISDN bus
     • ISDN 2: Internal (NT) ISDN-bus
     • A 100-Ohm resistor for line termination is switchable in LCOS.

  8. SIM card slot

     • Slide the SIM card into the SIM card slot using the marker to ensure that the card is the right way round.
     • Ensure that the SIM card clicks into place on insertion.
     • To remove the card from the device, press the card lightly into the device.
     • Let go to release the SIM card from the slot.

  9. Configuration interface
     Use the included serial configuration cable to connect the serial interface (COM) to the serial interface of the device you want to use for configuring / monitoring.

  10. USB interface
      You can use the USB interface to connect a USB printer or a USB storage device.

  11. Power connector and grounding point (device back side)

      • Supply power to the device via the power connector.
      • Please use the IEC power cable supplied (separately available for WW devices).

  12. ATTENTION: High touch current possible! Connect to earth before connecting the power supply.

SAFETY INSTRUCTION

• Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
• Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

Please observe the following when setting up the device

• The mains plug of the device must be freely accessible.
• For devices to be operated on the desktop, please attach the adhesive rubber footpads
• Do not rest any objects on top of the device and do not stack multiple devices
•  Keep all ventilation slots of the device clear of obstruction
• Mount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets. Pay attention to the “R” and “L” marks on the brackets for accurate mounting.

LED description & technical details

• LANCOM Systems 1926VAG-5G SD-WAN Router-fig24
• This product contains separate open-source software components which are subject to their own licenses, in particular the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device‘s WEBconfig interface under “Extras > License information“. If the respective license demands, the source files for the corresponding software components will be made available on a download server upon request.
• Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with
  Directives 2014/30/EU, 2014/53/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc/

References

• DoC - LANCOM Systems GmbH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>