VISUAL COMFORT 4504093S-962 Medium 2-Light Brushed Nickel LED Vanity Light Instruction Manual
- October 30, 2023
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT 4504093S-962 Medium 2-Light Brushed Nickel LED Vanity
Light
**General Product Information
**
The Kiel Wall / Bath fixtures are designed to be installed using NEC-compliant junction boxes. These products are safety listed for damp locations and can be mounted horizontally or vertically. Please note that this instruction manual shows a typical installation.
CAUTION – RISK OF FIRE:
This product must be installed by a person familiar with the construction and
operation of the product and the hazards involved, in accordance with the
applicable installation code.
SAVE THESE INSTRUCTIONS!
Product Usage Instructions
- Locate an NEC-compliant junction box and install the mounting plate provided with the fixture onto the box using the fixture screws.
- Attach the end plate to the fixture using the end plate screw.
- Attach the channel shade to the fixture using the channel shade screw.
- Connect the fixture wires to the wires in the junction box according to the wiring diagram provided in the instruction manual.
- Secure the fixture onto the mounting plate using the fixture screw.
- If mounting vertically, ensure that the channel shade is facing upwards. If mounting horizontally, ensure that the channel shade is facing downwards.
- Turn on the power to the fixture and test it to ensure it is working properly.
If you have any questions or concerns about installation or usage, please refer to the instruction manual or contact our customer service department at 847.410.4400 or visit our website at www.generationlighting.com.
GENERAL PRODUCT INFORMATION:
- These fixtures are intended to be installed utilizing NEC-compliant junction boxes.
- This product is safety listed for damp locations.
- This product may be mounted horizontally or vertically.
- This instruction shows a typical installation.
CAUTION – RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
- Use minimum 90°c supply conductors.
SAVE THESE INSTRUCTIONS!
Install the Fixture
- Secure the mounting plate to the junction.
- Slide the a shade into channel on both ends of the fixture.
- Install an end plate onto the end of the fixture and secure it place with the end plate screw. Repeat for the other side.
- Connect the fixture to a suitable ground in accordance to local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Neatly place all the wires into the junction box, place the fixture base onto the mounting plate, and secure it in place with the fixture screws.
©2022 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort & Co. logo is a registered trademark of Visual Comfort & Co. Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.
7400 Linder Ave., Skokie, IL 60077
T 847.410.4400 | F 847.410.4500
www.generationlighting.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>