JIMMY F8 Nano Ultrasonic Hair Dryer User Manual

JIMMY F8 Nano Ultrasonic Hair Dryer

Product Information

The F8 hair dryer is a product manufactured by Kingclean Electric Co., Ltd and distributed under the brand name JIMMY. The hair dryer has a rated power supply of 220V-240V-50Hz and a rated power of 1600W. It comes with a slide switch, fuse, and resistor. The product has a two-year warranty from the date of purchase and should be disposed of through environmentally-friendly recycling.

Product Usage Instructions

1. Before using the F8 hair dryer, ensure that it is properly plugged into an electrical outlet with a voltage range of 220V-240V-50Hz.
2. Turn on the hair dryer by sliding the switch to the desired heat setting.
3. Hold the hair dryer at a distance of at least 15cm from your hair to prevent heat damage.
4. Use the hair dryer’s concentrator nozzle to direct airflow in a specific direction for more precise styling.
5. When finished, turn off the hair dryer by sliding the switch to the off position and unplug it from the electrical outlet.
6. Store the hair dryer in a cool, dry place away from moisture and heat sources.

Products Installation

Parts Name

2-in-1 Nozzle
Push the slide button to change the air outlet state:

• Slide to ” + ” side : change to more dispersed wide air flow, for fast hair drying.
• Slide to” – “side: change to more concentrated high speed air flow, for styling.

Diffuser Nozzle
Change air flow direction to side wind, suitable for long hair and makes natural curly and fluffy hair style.

Packing List

• Machine x 1
• 2-in-1 Nozzle x 1
• Diffuser Nozzle x 1
• User Manual x 1

Use of Products

Using Method

First, Set the On/Off button to Off ” o ” position, then plug in the socket. Push the On/Off button to tum on the machine. Press the LED display screen to choose suitable wind heat, suitable wind speed and mode.(Figure 1,Figure 2) Operate the LED display screen after tum on machine. The function description of the LED display screen includes: (Figure2)

1. Function icon :Nano water ion” o “and negative ion. When turn off the machine the icon disappears. When turn on the machine the icon lights up and indicates that the function is normal.

2. Mode button : Press the Mode button to switch among four modes: Warm ” “, Cool ” “, Cool/Hot” “, Soft

3. Warm mode : In this mode, machine stays in the same heat and air speed setting as when it is turned off. Both air heat and air speed settings are adjustable in this mode.

4. Cool mode : When change from warm mode to cool mode, the air speed stays unchanged, air speed is adjustable in this mode.If press Heat button to change heat setting, the device will change automatically to warm mode.

5. Cool/hot circulation mode :lts original air and speed setting stays the same as the first two modes. Air heat and speed are adjustable. The air heat and speed indicator ring displays red and blue light alternately.

6. Soft mode :ln this mode device works in low air heat and speed mode .The Air heat & speed indicator ring shows full white.

7. Heat button: Press Heat button to switch among high, mid, low, 3 different air heat settings, the indicator changes accordingly as below:

8. High air heat : Air heat indicator” ” lights up.

9. Mid air heat :Air heat indicator” ” lights up.

10. Low air heat :Air heat indicator” ” lights up.

11. Speed button: Press Speed button to switch among high, mid, low, 3 different air speed settings, the indicator changes accordingly as below:

12. High air speed :indicator” “lights up.

13. Mid air speed :indicator” ” lights up.

14. Low air speed :indicator” ” lights up.

15. The air heat&speed indicator ring: shows the state of air heat and air speed. According to the uses operation, the indicator ring changes as below:
    When device works in warm mode, the indicators ring indicates air heat settings.

16. High heat,the air heat & speed indicator ring shows full red.

17. Mid heat ,the air heat & speed indicator ring shows 2/3 red and 1/3 white.

18. Low heat ,the air heat & speed indicator ring shows 1/3 red and 2/3 white.

19. When device works in cool mode, the indicators ring indicates air speed settings.

20. High speed, the air heat & speed indicator ring shows full blue.

21. Medium speed, the air heat & speed indicator ring shows 2/3 blue and 1 /3 white.

22. Low speed,the air heat & speed indicator ring shows 1/3 blue and 2/3 white.

23. Memory function : when device is turned on for the first time, its original mode is high heat and high speed. When it is turned on from second time, it stays in the same mode as previous use.

Notes:

1. During use do not touch high temperature golden aluminum sheet to avoid scald.
2. Keep the position of holding the handle upward to avoid blocking the inlet mesh and affecting the air inlet effect.

The products is equipped with quick connect 2-in-1 nozzle and diffuser nozzle ,which can spin in 360°(Figure 3). 2-in-1 Nozzle can push the push button to adjust the air volume: Figure 4 shows high speed air volume, push the button upward to reduce air volume. Diffuser nozzle is with built-in rotatable fan blades to create more even air flow. Please install the nozzle under the switch-off status, do not disassemble the nozzle during device working to avoid scald. After using, remove the nozzle until it cools down to avoid scald. When the device is equipped with nozzle, when the device is working in warm mode, do not push the push button and touch the nozzle to avoid scald.

Please keep the distance of more than 10cm between hair and air inlet, to avoid hair from entangling into the hair dryer. Please keep the distance of more than 3cm between hair and air outlet to avoid scald. After using, turn off the device and unplug the power cord.

Product Features

This hair dryer adopts high-speed turbofan digital motor, the strong air flow can dry the hair quickly without damaging hair. The Nano water ion and millions of negative ion technology, deeply moisturizing, making hair smooth, reducing the accumulation of static electricity, also good for the tightening of hair cuticle, which makes hair more shining and healthy.

1. The nano water ion is the microparticle ion wrapped by water , which is formed by the decomposition of water under high voltage electricity.

2. During using, under the mode of “wanm”, “cool”, ii all blows out the air with nano water ion.

3. The following issues will occur during nano water ion generation, which are normal phenomenon:
   There is water drop out from the water ion nozzle. It might have some special smell, which do no harm to human body.

4. The water ion hair drying will no have obvious effect for the following people:

5. People with natural curly hair

6. People with with hair that can be curled easily

7. People with good quality hair

8. People who has negative ion perm hair for not over 3-4 months

9. People with short hair

10. The water ion is generated through accumulating the water in the air,but under some circumstances, due to limited restrictions, it might not generate water ion. Such as it is difficult to accumulate water under the low temperature and low humidity status, in this case, it will generate negative ion.

Maintenance and Storage

• Please make sure the button is in the Off position and then unplug the socket during cleaning.
• Please regularly use the towel, cotton bud or tooth brush to clean the inlet and outlet.And Rotate down inlet metal network to clean the filter screen.
• Please do not use nail or sharp articles to press and rub the inlet and outlet to avoid products damage.
• Please do not use alcohol, nail polish remover or detergent to clean the products, otherwise, it will cause failure, crack or colour fading.

Safety Notes

• Please read this instruction manual carefully before use, and properly save and store it for future use.

• Please use the voltage and electric current as described on the rating label.

• Please do not block the outlet and inlet, otherwise, it will cause scald, electric shock or fire due to short circuits.

• Please do not use the hair dryer when the hands are wet, otherwise, it will cause electric shock and fire caused by short circuit.

• Please do not unplug the power plug when the hands are wet, otherwise, it will cause electric shock and injury.

• When the hair dryer is used in the bathroom, unplug it after using, even though the hair dryer is powered off, it is still dangerous when it is close to water.otherwise, it might cause accidents or damage.

• Please do not use hair dryer next to bath tub, shower, lavatory or other utensil etc.

• Please do not use the products when the power line is entangled, otherwise it will cause electric shock or fire due to short circuit.

• Please do not use the machine near to petroleum gas or other inflammable (like propellant, paint thinner, spray etc.), otherwise it will cause an explosion.

• Please do not leave the power on when the machine is not used, otherwise, it will cause fire due to short circuit.

• Please do not entangle the power line around the main machine, otherwise it will cause power cut and cause electric shock or fire due to short circuit.

• Please keep out reach of children and infants to avoid electric shock and injury.

• Please do not put the inlet downwards during working, otherwise, it will cause thermal fuse red and cause fire.

• Please do not damage, refit, bend hardly, pull,twist the power line, or put anything on the power cord , squeeze the power line, otherwise it will cause electric shock or fire due to short circuit.

• The outlet and nozzle will get hot during using, please do not touch it to avoid getting hurt.

• If the smell of protein burning occurs during use, it may be caused by the hair debris entering the hair dryer with the wind. After normal use for a period of time, the odor will dissipate automatically and will not affect normal use.

• Prevent the fan from falling down or from getting strike, otherwise, it will cause electric shock or fire due to short circuit.

• Please avoid to use it when the inlet is damaged, otherwise hair might be drawn into inlet, causing hair damage.

• Please unplug the socket immediately, please do not immerse your hand into the water if the machine is accidentally fallen into the water.

• For additional protection,lt is recommended to install a residual current device (RCD) with rated current not exceeding 30mA when using electrical products, so as to avoid fire accidents and personal hazards caused by leakage. Ask your installer for advice.

• Please do not use it If it is not plugged in tightly, otherwise, it will cause, scald, electric shock or fire due to short circuit.

• Clean the socket regularly to prevent dust from accumulating, otherwise, it will cause insulation fault due to humidity, eventually causing fire. Disconnect the power immediately and clean it with dry cloth.

• Please make sure that hold the power plug and do not drag the power cord and make when unplugging the power plug. Otherwise, the power cord may be broken, scald, electric shock or fire due to short circuit.

• Please stop using the machine If you see the fire in the outlet during hot wind mode, clean the dust in the inlet and outlet, otherwise it might cause scald or fire.

• Please do not store the power line when it is twisted, otherwise, it will cause power line cut, which might cause scald, electric shock or fire due to short circuit.

• The product is only for the use of drying hair, please do not use to dry shoes or clothes etc., otherwise, it will cause electric shock or fire due to short circuit.

• Please keep the distance of more than 10cm between hair and the inlet,avoiding hair from entangling into the hair dryer.

• Please keep the distance of more than 3cm between hair and outlet to avoid scald

• The hair dryer is equipped with overheating protection system, the power will be cut when ii is overheated.And switch off and unplug it immediately, let cool down for a minutes. Check if there is some fluff or hair in the inlet or outlet, then switch on again.

• Please make sure to adjust to “off” after using, unplug from the socket, otherwise it might cause scald or fire.

• If the power line is damaged, which must be replaced by professional staff from local agents.

Note : This sign means Forbidden to use ii during bath or shower.

Trouble Shooting

Please check the following issues before sending to designated repair offices.

• Failure 1: The motor is not working
• Possible Cause 1 : Not plugged in tightly.
• Solution 1 : Check whether power cord plugged in tightly.
• Possible Cause 2 : No power on the socket.
• Solution 2 : Check the socket.
• Possible Cause 3 : The on/off button is not pushed to proper position.
• Solution 3 : Push on/off button to proper position.

Failure 2: Device does not work after turned on

• Possible Cause 2 : The on/off button has been pushed too frequently, machine protection has been activated.
• Solution 2 : Turn off machine, wait for 2-3 seconds, then turn on again.

Failure 3: Device power off suddenly

• Possible Causes 1 : Overheating protection system started.
• Solution 1 : Switch off and unplug the power cord, use it after it cool down for few minutes.
• Possible Causes 2 : The air inlet was blocked by fluffy, hair, etc, which lead to overheating protection system.
• Solution 2 : Switch off and unplug the power cord, use ii after cool down for few minutes.
• Failure 4 : Air volume is small
• Possible cause 1 : The inlet was blocked by fluffy, hair, etc.
• Solution 1 : Clean air outlet.

If fault remains after adopting the above solutions, contact after sale service or local distributor immediately.

Product Specifications

Technical Parameter

Circuit Diagram

Manufacturer Information

Disposal
The machine, accessories and packaging should be sorted for environmentally friendly recycling. Do not dispose of the machine into household waste!

References

• JIMMY cordless vacuum, JIMMY vacuum cleaners, H9 Pro powerful vacuum, JIMMY F6 hair dryer -JIMMY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>