JIMMY JV53 Lite Handheld Cordless Vacuum Cleaner Instruction Manual
- June 3, 2024
- JIMMY
Table of Contents
JV53 Lite Handheld Cordless Vacuum Cleaner
Instruction Manual
Unpacking
Open the package, take out the foam pad , all accessories and machine from the
package, take off the plastic bag and save them for the purpose of future
maintenance and repair.
Parts Name
1.Floor Head Release Button| 2.Metal Tube Release Button| 3.Dust Cup Release
Button
---|---|---
4 .HEPA| 5.Speed Control Button| 6.On/off Button
7.Battery Pack Release Button| 8.Battery Pack| 9.Adaptor
10.Metal Tube| 11.Electric Floor Head| 12.2-in-1 Upholstery Tool
13.2-in-1 Crevice Tool| 14.Charging Base
Packing List
Part Name| Handheld Vacuum
Cleaner| Battery Pack| Electric Floor Head| 2-in-1 Upholstery Tool
---|---|---|---|---
Quantity| 1| 1| 1| 1
2-in-1 crevice
tool| Charging Base| Metal Tube| Adaptor| Instruction Manual
1| 1| 1| 1| 1
Main-body Assembly
Connect the electric floor head with metal tube
Hold the floor head with left hand, use right hand to insert the metal tube
vertically into floor head, align with the conductive needle, press the handle
until a “click” sound is heard.(Picture 1)
Attention: Keep the handle and floor head in the same direction, conductive needle shall align with the socket.
Charging base assembly
Fix the charging base on wall through screw holes, so that the handheld vacuum
cleaner can be placed.(Picture 2)
Assemble battery pack and handheld vacuum Cleaner
Battery pack assembly: use one hand to hold handheld vacuum cleaner, one hand
to hold battery pack, align with the guide-track groove, then install the
battery pack until the “click” sound is heard. Pull hard the battery pack
downwards, if the batter pack remain tight, which means battery pack assembly
complete. (Picture3)
Attention:Please disassemble the battery pack from the machine when the vacuum
cleaner is not used for a long time.Pack the machine and store in dry place,
avoiding direct sunlight or humid environment.
Assemble the electric head floor, metal tube and handheld vacuum cleaner
First, assemble the floor head and conductive metal tube based on the
assembling method of electric floor head and conductive metal tube. Secondly,
align the conductive needle of the conductive metal tube with the suction
mouth conductive pipe, push upwards until a “click” sound is heard.(Picture4)
Accessories Assembly
For ease of use, this product is specially equipped with accessories for the
hand-held vacuum cleaner. The handheld can connect to different tools for
different cleaning purpose.
Connect handheld vacuum cleaner with 2-in-1 upholstery tool
Insert 2-in-1 upholstery tool connector into the handheld air inlet until it
is tightly fitted. (Picture5)
Attention: The handheld vacuum cleaner can also connect the accessories
such as: 2-in-1 crevice tool, soft brush and electric mattress head, the
connecting method is the same as 2-in-1 upholstery tool.
Connecting accessories with charging base
Please fix the charging base on a clean wall, do not fix on the wet wall like
in the kitchen. After the task has been competed, place them on the charging
base.(Picture6&7)
Use of Vacuum Cleaner
Charging
Attention:When using the machine for the first time, the battery capacity is
not full, need to put the machine on the charging base or take out the battery
to charge. The machine is able to be used after the battery is charged
fully.(Picture8-1&2)
Charge the vacuum cleaner in time when battery power is insufficient; When the
voltage is too low, to protect the battery, the vacuum will automatically turn
off. At this time, the vacuum must be charged. During charging, the battery
pack can be taken off, charge it through adaptor(Picture8-1), or place the
machine onto the charging base(Picture8- 1), and the charging indicator turns
red. The vacuum cleaner is charging.
Attention: When using the vacuum cleaner for the first time, fully charge
the battery and fully discharge the battery before second charge to increase
the battery life.
JV53 Charging time is about 4-5 hours.When the charging indicator on the hand- held vacuum turns from red to green, it means the vacuum cleaner is fully charged. We recommend continue charging for half an hour to one hour, so that the charging effect is better. After charging, unplug the charger to stop charging.(Picture9)
Use of Handheld Vacuum Cleaner
Take the handheld vacuum from the charging base, press the on/off button to
turn on and turn off the vacuum. Green indicator lights up, it is normal mode,
press the speed control button to strong mode, the speed control button can
switch between strong mode and normal mode easily. (Picture10)
Use of Electric Floor Head
Electric floorhead can clean short hair carpet, hardfloor or tile
floor.(Picture11)
Attention:When the electric floorhead is running, if brushroll stops running
due to big foreign object blockage or excessive fiber entangle, or the child
accidentally putting hand into brushroll, the floorhead will stop working to
protect personal safety and avoid damage to floorhead motor.
Use of Accessories
2-2-in-1 upholstery tool: Suitable to clean du mites on bed, sofa and other
kinds of fabric furniture. (Picture12)
2-2-in-1 crevice tool: Suitable to clean crevice corners and other narrow
areas.(Picture13)
Cleaning and Replacing Parts
Attention:
- HEPA filter is available for sale from local vacuum cleaner distributors.
- It is recommended to clean the dust cup after each use; When the dust cup is full or the HEPA filter is clogged, it needs to be cleaned and replaced if necessary. Floorhead brushroll might be entangled with hair after long time use, it needs to be cleaned in time to keep the vacuum working more efficiently.
Cleaning Dust Cup and Filtration System
Clean dust cup
Pull out downwards the dust cup On/ off button to dump dust in dust
cup.(Picture 14)
Press hard the dust cup release button, hold steady the main body with right
hand, rotate the dust cup in the direction shown on the picture, remove the
dust cup from main body to further clean the dust cup.(Picture15)
Clean filter system
Hold the main body, take the HEPA upwards as shown in the picture, take out
the HEPA, then take out the dual-cyclonic system components, clean them.
(Picture16)
Fix inlet HEPA, rotate the HEPA cover in the same direction as shown in the picture, separate the HEPA cover from inlet HEPA, which will be easily cleaned. After cleaning and drying, assemble again.(Picture17&18) Attention:The inlet HEPA must be fully dried before installation.
Cleaning Electric Brushroll
- Use your finger to release the brushroll button, take out the side cover of the brushroll.
- Take out one side of the brushroll in the same direction as shown on the picture, then brushrollcan be taken out to clean.
- After cleaning and replacing, reassemble it.(Picture19)
Disassemble electric floor head and metal tube
When store or clean the vacuum cleaner, if you need to disassemble the
electric floor head, press the electric floor head release button, pull
upwards the metal tube. (Picture20)
Unpack the Battery Pack
Press the battery release button, take out the battery pack.Put the battery
pack into a plastic bag, then place in a dry place.(Picture21)
Disassemble the Handheld Vacuum Cleaner and Metal Tube
Fix the handheld first, press the release button of metal tube, pull out
it.(Picture22)
Machine Storage
Take out the battery pack if the machine is not used for a long time. Store
the machine in cool and dry place, avoiding direct sunlight or humid
environment.
Safety Notes
This vacuum cleaner is designed for home use. Do not use it for commercial or
other purposes.
Please read this instruction manual carefully before use, properly save and
store it for future use.
Do not put the vacuum close to fire or other high temperature facility.
Do not use or store the machine under extreme bad conditions, for example,
extreme temperature. It is recommended to use it indoors between the
temperature of 5 °C to 40 °C.
Store the machine in dry place and avoid direct sunlight.
Fully charge the battery before first use or after long storage.
Before using the vacuum, make sure brushroll is assembled, otherwise, it may
lead to motor fan blockage, causing motor burn out.
Please do not use the vacuum to pick up detergent, oil, glass slag, needle,
cigarette ash, wet dust, water, matches, etc.
Please do not use the vacuum to pick up tiny particles such as cement,gypsum
powder, wall powder, or large objects such as paper balls, otherwise it will
cause malfunctions such as blockage and motor burnout.
Avoid blockage to air inlet or brushroll, it may cause motor failure.
Do not pour or splash water or other liquids into the machine to avoid short
circuit to burn out the machine.
If the brushroll is not working, please check whether the brushroll is
entangled with hair or other long fiber, clean it in time.
When storing the machine for a long time, ensure that the battery is fully
charged before storage and charge the machine at least every three months.
Unplug the charger to clean or repair the machine. Hold the charger when
plugging or unplugging it, and do not pull the charging cord.
Use a dry cloth to clean the machine. Liquids like gasoline, alcohol, lacquer
thinner will cause crack or colour fading and cannot be used.
If the machine is not working after fully charged, it must be checked and
repaired in our designated office, please do not dismantle the machine on your
own.
When discard the machine, please press the button to release the battery pack,
take out the battery pack, make sure the machine is disconnected with power
and handled properly. Do not throw into fire,water or soil.
If the battery liquid leakage touches your skin or clothes, wash it with
water, if there is any discomfort, please go to hospital immediately.
Do not use non-original battery pack, avoiding machine damage and safety
problems.
Avoid to use the vacuum cleaner to pick up easily blockable things such as:
plastic bags, candy paper, big scrap of paper, which might affect the
function, even cause failure of working. Please clean the foreign matter on
the floor head in time, then it will work normally. The discarded battery pack
shall be recycled safely, do not throw away casually.
Trouble Shooting
Please check the following issues before sending to designated repair offices.
Symptoms | Possible Causes | Solutions |
---|---|---|
Motor is not working | Battery has no power | Charge the vacuum cleaner |
Motor is not working | Metal tube, electric floor had, battery pack is not | |
assembled correctly to the mainbody | Check the accessories are assembled |
correctly to the mainbody
Low suction| Dust cup is full| Empty dust cup
Low suction| HEPA is blocked by dust| Clean or replace HEPA
Low suction| Floor head hose or brushroll blocked| Clean the floorhead
Charging indicator did not turn red during charging| Battery pack is not well
assembled| Reassemble battery pack
Short run time after charging| Battery not fully charged| Follow instruction
manual to fully charge the battery
Short run time after charging| Battery old aging| Replace new battery
Attention:If any other failures occurred, which need professional tools, in order to avoid danger, the machine must be repaired or replaced by manufacturer, other maintenance offices or professionals from similar offices.
Technical Parameter
Model No.| JV53 Lite
Rated Voltage| 21.6V
Rated Power| 425W
Adaptor Input Voltage| 100-240V ~ 50/60Hz 0.5A
Adaptor Output Voltage| 25V 600mA
Model No of Electric Floor
Head| T-EB110
Rated Power of Electric
Floor Head| 30W
Model No of Electric
Mattress Head| T-CS6.0
Rated Power of Electric
Mattress Head| 5W
Battery pack capacity| 2500mAh
Charging time| 4h-5h
Circuit Diagram
Manufacturer Information
Manufacturer | Kingclean Electric Co., Ltd |
---|---|
Address | No.1 Xiangyang Road, Suzhou New District, Jiangsu Province 215009, |
China
Disposal
The machine, accessories and packaging should be sorted for environmental-
friendly recycling.
Do not dispose of the machine into household waste!
Only for EC countries:
According to the European Guideline 2012/19/EU, machine that are no longer
usable, and according to the European Guideline 2006/66/EC, defective or used
battery packs/batteries, must be collected separately and disposed of in an
environmentally correct manner.
Battery packs/batteries:
Integrated batteries may only be removed for disposal by qualified personnel.
Opening the housing shell can damage or destroy the machine.
Do not dispose of battery packs/batteries into household waste, fire or water.
Battery packs/batteries should, if possible, be discharged, collected,
recycled or disposed of in an environmental-friendly manner.
Subject to change without notice.
Warranty Information
This product enjoys one year warranty for the machine and 6 months warranty
for the battery service starting from the date of purchase.
Excluded from the guarantee is normal wear, commercial use, alterations to the
appliance as purchased, cleaning activities, consequences of improper use or
damage by the purchaser or a third person, damage, that can be attributed to
external circumstances or caused by the batteries.
NOTES
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>