JIMMY JV53R Wireless Vacuum Cleaner Instruction Manual

JIMMY JV53R Wireless Vacuum Cleaner

Products Installation

Unpacking

Open the package, take out the foam pad , all accessories and machine from the package, take off the plastic bag and save them for the purpose of future maintenance and repair.

Parts Name

1. Floor Head Release Button
2. Metal Tube Release Button
3. Dust Cup Release Button
4. HEPA
5. Speed Control Button
6. On/off Button
7. Battery Pack Release Button
8. Battery Pack
9. Adaptor
10. Metal Tube
11. Electric Floor Head
12. Electric Mattress Head
13. 2-in-1 Upholstery Tool
14. 2-in-1 Crevice Tool
15. Soft Brush
16. Charging Base

Packing List

Part Name| Handheld Vacuum Cleaner| Battery Pack| Electric Floor Head| Electric Mattress Head| 2-in-1 Upholstery Tool
---|---|---|---|---|---
Quantity| 1| 1| 1| 1| 1
2-in-1 crevice tool|

Soft Brush

|

Charging Base

|

Metal Tube

|

Adaptor

| Instruction Manual
1| 1| 1| 1| 1| 1

Main-body Assembly

Connect the electric floor head with metal tube

Hold the floor head with left hand, use right hand to insert the metal tube vertically into floor head, align with the conductive needle, press the handle until a “click” sound is heard.(Picture 1) Attention:Keep the handle and floor head in the same direction, conductive needle shall align with the socket.

Charging base assembly

Fix the charging base on wall through screw holes, so that the handheld vacuum cleaner can be placed.(Picture 2)

Assemble battery pack and handheld vacuum Cleaner

Battery pack assembly: use one hand to hold handheld vacuum cleaner, one hand to hold battery pack, align with the guide-track groove, then install the battery pack until the “click” sound is heard. Pull hard the battery pack downwards, if the batter pack remain tight, which means battery pack assembly complete. (Picture3)

Attention:Please disassemble the battery pack from the machine when the vacuum cleaner is not used for a long time.Pack the machine and store in dry place, avoiding direct sunlight or humid environment.

Assemble the electric head floor, metal tube and handheld vacuum cleaner

First, assemble the floor head and conductive metal tube based on the assembling method of electric floor head and conductive metal tube. Secondly, align the conductive needle of the conductive metal tube with the suction mouth conductive pipe, push upwards until a “click” sound is heard.(Picture4)

Accessories Assembly

For ease of use, this product is specially equipped with accessories for the hand-held vacuum cleaner. The handheld can connect to different tools for different cleaning purpose.

Connect handheld vacuum cleaner with 2-in-1 upholstery tool

Insert 2-in-1 upholstery tool connector into the handheld air inlet until it is tightly fitted. (Picture5)

Attention:The handheld vacuum cleaner can also connect the accessories such as: 2-in-1 crevice tool, soft brush and electric mattress head, the connecting method is the same as 2-in-1 upholstery tool.

Connecting accessories with charging base

Please fix the charging base on a clean wall, do not fix on the wet wall like in the kitchen. After the task has been competed, place them on the charging base.(Picture6&7)

Use of Vacuum Cleaner

Charging

Attention: When using the machine for the first time, the battery capacity is not full, need to put the machine on the charging base or take out the battery to charge. The machine is able to be used after the battery is charged fully.(Picture8-1&2)

Charge the vacuum cleaner in time when battery power is insufficient; When the voltage is too low, to protect the battery, the vacuum will automatically turn off. At this time, the vacuum must be charged. During charging, the battery pack can be taken off, charge it through adaptor(Picture8-1), or place the machine onto the charging base(Picture8-1), and the charging indicator turns red. The vacuum cleaner is charging.

Attention: When using the vacuum cleaner for the first time, fully charge the battery and fully discharge the battery before second charge to increase the battery life.

JV53 Charging time is about 4-5 hours.When the charging indicator on the hand- held vacuum turns from red to green, it means the vacuum cleaner is fully charged. We recommend continue charging for half an hour to one hour, so that the charging effect is better. After charging, unplug the charger to stop charging.(Picture9)

Use of Handheld Vacuum Cleaner
Take the handheld vacuum from the charging base, press the on/off button to turn on and turn off the vacuum. Green indicator lights up, it is normal mode, press the speed control button to strong mode, the speed control button can switch between strong mode and normal mode easily. (Picture10)

Use of Electric Floor Head

Electric floorhead can clean short hair carpet, hardfloor or tile floor.(Picture11) Attention:When the electric floorhead is running, if brushroll stops running due to big foreign object blockage or excessive fiber entangle, or the child accidentally putting hand into brushroll, the floorhead will stop working to protect personal safety and avoid damage to floorhead motor.

Use of Accessories

2-in-1 upholstery tool: Suitable to clean du mites on bed, sofa and other kinds of fabric furniture. (Picture12)

2-in-1 crevice tool: Suitable to clean crevice corners and other narrow areas.(Picture13)
Soft brush:Suitable to clean easily scratched furniture, such as book shelf, artworks. (Picture14)

Electric mattress head: Specially designed for sofa and mattress, it can beat up and remove the dust mites and bacteria which hide in the sofa and mattress by flapping of the brushroll. (Picture15)

Cleaning and Replacing Parts

Attention:

1. HEPA filter is available for sale from local vacuum cleaner distributors.
   It is recommended to clean the dust cup after each use; When the dust cup is full or the HEPA filter is clogged, it needs to be cleaned and replaced if necessary. Floorhead brushroll might be entangled with hair after long time use, it needs to be cleaned in time to keep the vacuum working more efficiently.

Cleaning Dust Cup and Filtration System

Clean dust cup Pull out downwards the dust cup On/ off button to dump dust in dust cup.(Picture 16)

Press hard the dust cup release button, hold steady the main body with right hand, rotate the dust cup in the direction shown on the picture, remove the dust cup from main body to further clean the dust cup.(Picture17)

Clean filter system

Hold the main body, take the HEPA upwards as shown in the picture, take out the HEPA, then take out the dual-cyclonic system components, clean them. (Picture18)

Fix inlet HEPA, rotate the HEPA cover in the same direction as shown in the picture, separate the HEPA cover from inlet HEPA, which will be easily cleaned. After cleaning and drying, assemble again.(Picture19&20) Attention:The inlet HEPA must be fully dried before installation.

Cleaning Electric Brushroll

1. Use your finger to release the brushroll button, take out the side cover of the brushroll.
2. Take out one side of the brushroll in the same direction as shown on the picture, then brushrollcan be taken out to clean.
3. After cleaning and replacing, reassemble it.(Picture21)

Storage of Vacuum Cleaner

Disassemble electric floor head and metal tube
When store or clean the vacuum cleaner, if you need to disassemble the electric floor head, press the electric floor head release button, pull upwards the metal tube. (Picture22)

Unpack the Battery Pack

Press the battery release button, take out the battery pack.Put the battery pack into a plastic bag, then place in a dry place.(Picture23)

Disassemble the Handheld Vacuum Cleaner and Metal Tube

Fix the handheld first, press the release button of metal tube, pull out it.(Picture24)

Machine Storage

Take out the battery pack if the machine is not used for a long time. Store the machine in cool and dry place, avoiding direct sunlight or humid environment.

Safety Notes

• This vacuum cleaner is designed for home use. Do not use it for commercial or other purposes.
• Please read this instruction manual carefully before use, properly save and store it for future use.
• Do not put the vacuum close to fire or other high temperature facility.
• Do not use or store the machine under extreme bad conditions, for example, extreme temperature. It is recommended to use it indoors between the temperature of 5 °C to 40 °C. Store the machine in dry place and avoid direct sunlight.
• Fully charge the battery before first use or after long storage.
• Before using the vacuum, make sure brushroll is assembled, otherwise, it may lead to motor fan blockage, causing motor burn out.
• Please do not use the vacuum to pick up detergent, oil, glass slag, needle, cigarette ash, wet dust, water, matches, etc.
• Please do not use the vacuum to pick up tiny particles such as cement,gypsum powder, wall powder, or large objects such as paper balls, otherwise it will cause malfunctions such as blockage and motor burnout.
• Avoid blockage to air inlet or brushroll, it may cause motor failure.
• Do not pour or splash water or other liquids into the machine to avoid short circuit to burn out the machine.
• If the brushroll is not working, please check whether the brushroll is entangled with hair or other long fiber, clean it in time.
• When storing the machine for a long time, ensure that the battery is fully charged before storage and charge the machine at least every three months.
• Unplug the charger to clean or repair the machine. Hold the charger when plugging or unplugging it, and do not pull the charging cord.
• Use a dry cloth to clean the machine. Liquids like gasoline, alcohol, lacquer thinner will cause crack or colour fading and cannot be used.
• If the machine is not working after fully charged, it must be checked and repaired in our designated office, please do not dismantle the machine on your own.
• When discard the machine, please press the button to release the battery pack, take out the battery pack, make sure the machine is disconnected with power and handled properly. Do not throw into fire,water or soil.
• If the battery liquid leakage touches your skin or clothes, wash it with water, if there is any discomfort, please go to hospital immediately.
• Do not use non-original battery pack, avoiding machine damage and safety problems.
• Avoid to use the vacuum cleaner to pick up easily blockable things such as: plastic bags, candy paper, big scrap of paper, which might affect the function, even cause failure of working. Please clean the foreign matter on the floor head in time, then it will work normally. The discarded battery pack shall be recycled safely, do not throw away casually.

Trouble Shooting

Please check the following issues before sending to designated repair offices.

Symptoms

|

Possible Causes

|

Solutions

---|---|---

Motor is not working

|

Battery has no power

|

Charge the vacuum cleaner

Motor is not working

| Metal tube, electric floor had, battery pack is not assembled correctly to the mainbody| Check the accessories are assembled correctly to the mainbody

Low suction

|

Dust cup is full

|

Empty dust cup

Low suction

|

HEPA is blocked by dust

|

Clean or replace HEPA

Low suction

| Floor head hose or brushroll blocked|

Clean the floorhead

Charging indicator did not turn red during charging| Battery pack is not well assembled|

Reassemble battery pack

Short run time after charging|

Battery not fully charged

| Follow instruction manual to fully charge the battery
Short run time after charging|

Battery old aging

|

Replace new battery

Attention:If any other failures occurred, which need professional tools, in order to avoid danger, the machine must be
repaired or replaced by manufacturer, other maintenance offices or professionals from similar offices.

Product Specification

Technical Parameter

T-CS6.0

Rated Power of Electric Mattress Head|

5W

Battery pack capacity| 2500mAh
Charging time| 4h-5h

Circuit Diagram

Manufacturer Information

China

Disposal

The machine, accessories and packaging should be sorted for environmental- friendly recycling.

Do not dispose of the machine into household waste!

Only for EC countries:

According to the European Guideline 2012/19/EU, machine that are no longer usable, and according to the European Guideline 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner.

Battery packs/batteries:

Integrated batteries may only be removed for disposal by qualified personnel. Opening the housing shell can damage or destroy the machine. Do not dispose of battery packs/batteries into household waste, fire or water. Battery packs/batteries should, if possible, be discharged, collected, recycled or disposed of in an environmental-friendly manner.
Subject to change without notice.

Warranty Information

This product enjoys one year warranty for the machine and 6 months warranty for the battery service starting from the date of purchase. Excluded from the guarantee is normal wear, commercial use, alterations to the appliance as purchased, cleaning activities, consequences of improper use or damage by the purchaser or a third person, damage, that can be attributed to external circumstances or caused by the batteries.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>