JIMMY WB55 Professional Grade Anti-Mite Vacuum Cleaner User Guide
- June 4, 2024
- JIMMY
Table of Contents
- Products Installation
- Use of the Product
- Cleaning and Maintenance
- Filter and Cyclone Cleaning
- Brushroll cleaning and installation
- Maintenance and storage
- Trouble Shooting
- Product Specification
- Circuit Diagram
- Manufacturer Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
WB55 Professional Grade Anti-Mite Vacuum Cleaner
User Guide
WB55
Products Installation
Unpacking
Open the package, take out all accessories and machines from the package, and
save the outer package for the purpose of future maintenance and repair.
Parts Name
Packing List
Vacuum Cleaner | MIF Filter | Mini-brush | User Guide |
---|---|---|---|
1 | 1 | 1 | 1 |
Use of the Product
Insert the plug into the socket, press the on/off button, the machine is in
strong mode and the strong indicator lights up. Press the mode button to
switch the low mode and the low indicator lights up.
Press the on/off button again, and the machine stop working(Figure 1)
Notice: For safety reasons, the UV light only works within 3cm above the
object as well as less than 30 inclination degrees. Otherwise, the UV light
will automatically turn off.
Cleaning and Maintenance
Dust Cup Cleaning
Turn off the machine and unplug the power cord. Then press the release button
and lift upward (Figure 2).
Hold the dust cup and dust cup cover separately, twist the dust lid anticlockwise (Figure 3), and remove it from dust cup to clean (Figure 4).
Filter and Cyclone Cleaning
Hold the cyclone in one hand, pinch the “UP” logo with the other hand, and
take out the filter (Figure 5).
Do Not tap the filter in the reverse side in case of a filter clog(Figure 6).
lean the cyclone metal filter with the attached mini brush(Figure 7).
After cleaning the filter, remove the two screws on the cyclone cover with a screwdriver to separate the cyclone cover from the cyclone to clean the internal air duct. After cleaning, assemble parts in reverse order. (Figure 8).
After cleaning the dust cup, filter and cyclone, assemble in reverse order.
Rotate the dust cup cover assembly into the dust cup. After hearing a “click”
the dot mark is aligned with the lock position that is assembled in place.
Notice:
- Do Not miss the filter!
- Use water or neutral reagents to clean the dust cup and wipe with dry cloths. Do not wash the filter until it is necessary. Make sure the filter and dust cup are completely dry before another use.
Brushroll cleaning and installation
Turn off the machine and unplug the power cord, rotate the right lock knob anticlockwise with your hand from locked position to unlock position (Figure 9) to remove the brushroll to clean up(Figure 10).
After brushroll cleaning, insert the brushroll from the hole on the right.
Make sure the left plug of the brushroll is fully snapped into the
belt(according to Figure 11) to lock the brushroll on the window.
Otherwise, the brushroll cannot be locked.
Notice: for safety reasons, please turn off the machine and unplug the
power cord before cleaning the brushroll.
Maintenance and storage
Please clean the dust cup and filter after each use for further use. It is
recommended to replace a filter after 30-50 hours of working time(depending on
specific situation) for better use.
Any paper, lead glass, plastic will greatly affect the effect of UV light.
Please wipe and clean the UV tube regularly for better use.
Put the machine in cool and dry place if the machine is to be idled. Do Not
leave it in direct sunlight or a humid environment.
Cautions
Please read this instruction manual carefully before use and keep it properly
for future use.
Never leave the machine working without supervision.
Please turn off the power switch and unplug the power cord if the machine is
to be idled. Do Not unplug the power cord with a humid hand in case of
electric shock.
Cut the power source in maintenance or off-service.
Keep the power cord away from sharp objects and do not drag the cord to move
the machine in case of cord damage.
For safety reasons, please do not use the product to clean hot objects such as
carbon, cigarette butts, sharp objects such as broken glass, corrosive
liquids, or flammable and explosive materials such as gasoline and alcohol.
Otherwise, it may cause product damage or fire.
Do not use this product to clean water or wet dust. Do Not operate it in humid
places (such as bathrooms, toilets, laundry rooms, etc.) to avoid malfunction.
Do Not place the machine near heating appliances or expose it to direct
sunlight in case of fire hazard.
Keep this product beyond the reach of a special individuals such as children
without adult supervision.
Do Not operate this machine with the suction port blocked in case of product
damage.
The product has UV light, for safety reasons, Do Not look at the bottom of the
machine when the power is on in case of ultraviolet rays harming.
Do Not apply this product to plants. Excessive use of UV may cause object
damage.
Do Not sit on this product in case of personal injury and product damage.
Do Not remove the brushroll cover or force the cover outward when the machine
is powered on for safety reasons.
This product can ONLY use for cleaning of textiles such as mattresses,
blankets, pillows, sofas, etc.
If the power cord is damaged, please ask for the professional help of the
manufacturer and other professionals for safety reasons.
This product can ONLY use for cleaning of textiles such as mattresses,
blankets, pillows, sofas, etc.
If the power cord is damaged, please ask for the professional help of the
manufacturer and other professionals for safety reasons.
Trouble Shooting
If the fault remains after adopting the following solutions, contact the after-sale service or local distributor immediately.
Problems | Possible Reasons | Solution |
---|---|---|
Power Failure | The power cord is not firmly inserted | Insert the power cord |
firmly.
No power on the socket.| Check the socket.
A power switch is not pressed.| Press the On/Off button.
Low suction power| The suction port is clogged.| Clean up the suction port.
Dust accumulation on the filter.| Clean up the filter.
Dust accumulation on cyclone.| Clean up the cyclone.
Dust accumulation on the filter.| Clean up filter.
UV tube failure| The UV function is automatically off for safety reasons or
weak reflection of object.| The LW function operates on the condition of less
than 5CM height from the object.
The machine operates on the same position for a long time.| Move the machine
forward and backward
The
e machine is placed upright.| The machine tilted no more than 30 degrees.
The sensor window is contaminated.| Clean the sensor window with a half-dry
cloth.
UV light damage.| Contact after-sale service.
Automatically turned off| Dust cup full.| The machine will automatically turn
off to prevent the motor from a long operation. If the machine is
automatically turned off. please clean up the dust cup and filter, unplug the
power cord and reuse if after 2 hours.
The suction port clogged.
Filter blocked.
Brushroll failure| Brushroll tangled with foreign matter.| Remove the cover
and clean up
the brushroll according to the user guide.
Belt broken.| Remove the cover according to the user guide and check the belt.
If broken, contact after-sale to repair.
Product Specification
Parameter
Model | WB55 |
---|---|
Rated voltage | 230V~ |
Rated frequency | 50Hz |
Rated power | 600W |
Circuit Diagram
Manufacturer Information
Manufacturer | Kingclean Electric Co., Ltd |
---|---|
Address | No.1 Xiangyang Road, Suzhou New District, Jiangsu Province 215009, |
China
Disposal
The machine, accessories, and packaging should be sorted for environmental-
friendly recycling.
Do not dispose of the machine into household waste!
Only for EC countries: According to the European Guideline 2012/19/EU,
machines that are no longer usable, and according to the European Guideline
2006/66/EC, defective or used battery packs/batteries, must be collected
separately and disposed of in an environmentally correct manner.
Subject to change without notice.
Warranty Information
This product enjoys one year warranty for the machine service starting from
the date of purchase.
Excluded from the guarantee is normal wear, commercial use, alterations to the
appliance as purchased, cleaning activities, consequences of improper use or
damage by the purchaser or a third person, and damage, that can be attributed
to external circumstances or caused by the batteries.
Web:www.jimmyglobal.com
Email:support@jimmyglobal.com Contact us
-we’ll get back within 1 business day.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>