ZALMAN M3 Matx Mini Tower Computer Case User Manual

: June 4, 2024
: ZALMAN

Table of Contents

ZALMAN M3 Matx Mini Tower Computer Case
Precautions
Specifications
**Accessories
**I/O Ports
| Part| #| Part| #| Part| #| Part
**Mounting the fans
**I/O Connectors
Documents / Resources

ZALMAN M3 Matx Mini Tower Computer Case

Precautions

Read this manual carefully before installing.
Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
Wear gloves to prevent accidents when installing the product.
Severe damage may occur when mounting the system, so do not apply excessive force.
Connecting the cable incorrectly may cause a fire due to a short circuit. Make sure to refer to the manual when connecting the cable.
Be careful not to block the ventilation hole of the product when using the system.
Avoid locations with direct sunlight, water, moisture, oil, and excessive dust. Store and use the product in a well-ventilated location.
Do not wipe the surface of the product using chemicals. (organic solvents such as alcohol or acetone)
Do not insert your hand or another object into the product during operation, as this may injure your hand or damage the object.
Store and use the product out of children’s reach.
Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.

Removing the side panels $ZALMAN M3 Matx Mini Tower Computer Case FIG $3$$

Removing the front panel

Mounting the motherboard $ZALMAN M3 Matx Mini Tower Computer Case FIG $5$$ $ZALMAN M3 Matx Mini Tower Computer Case FIG $6$$

Mounting the PSU
$ZALMAN M3 MaZALMAN M3 Matx Mini Tower Computer Case FIG $7$tx Mini Tower Computer Case FIG $7$$

Mounting the PCI-E(VGA) card $ZALMAN M3 MZALMAN M3 Matx Mini Tower Computer Case FIG $8$atx Mini Tower Computer Case FIG $8$$

Mounting the 3.5″ HDD $ZALMAN M3 Matx Mini Tower Computer Case FIG $9$$

Mounting the 2.5″ SSD / HDD $ZALMAN M3 Matx Mini Tower Computer Case FIG $10$$

Mounting the radiator

Fans Included / Specifications $ZALMAN M3 Matx Mini Tower Computer Case FIG $13$$

Specifications

Model	M3
Case Form Factor	mATX Mini Tower
Dimensions	407(D) x 210(W) x 457(H)mm
Weight	6.0kg
Case Materials	Plastic, Steel, Tempered Glass
Motherboard Support	mATX / Mini-ITX
Maximum VGA Length	330mm
Maximum CPU Cooler Height	165mm
Maximum PSU Length	180mm
PCI Expansion Slots	4
Drive Bays	2 x 3.5” / 4 x 2.5”

Fan Support

1 x USB3.0, 2 x USB2.0, Power Button, Reset Button

$ZALMAN M3 Matx Mini Tower Computer Case FIG $15$$

**Accessories

$ZALMAN M3 Matx Mini Tower Computer Case FIG $16$$ **

**I/O Ports

$ZALMAN M3 Matx Mini Tower Computer Case FIG $17$$ **

| Part| #| Part| #| Part| #| Part

---|---|---|---|---|---|---|---
ⓐ| USB 2.0 Ports| ⓑ| USB 3.0 Port| ⓒ| Microphone Jack| ⓓ| HDD / Power LED
ⓔ| Headphone Jack| ⓕ| Reset Button| ⓖ| Power Button| ⓗ|

**Mounting the fans

$ZALMAN M3 Matx Mini Tower Computer Case FIG $13$$ **

**I/O Connectors

$ZALMAN M3 Matx Mini Tower Computer Case FIG $14$$ **

Documents / Resources

| ZALMAN M3 Matx Mini Tower Computer Case [pdf] User Manual
M3, Matx Mini Tower Computer Case, Mini Tower Computer Case, Tower Computer Case, M3, Computer Case
---|---
| ZALMAN M3 mATX Mini Tower Computer Case [pdf] User Manual
M3 mATX Mini Tower Computer Case, M3, mATX Mini Tower Computer Case, Mini Tower Computer Case, Tower Computer Case, Case, Computer Case