CG Mobile SP-V30 Wireless Headphones User Guide
- August 9, 2024
- CG MOBILE
Table of Contents
CG Mobile SP-V30 Wireless Headphones
Product Information
Specifications
- Product: Wireless Headphones
- Model: SP-V30
- Content: Bluetooth Headphones, Charging Cable, Aux-in Cable, Quick Guide
- Charging Port: x1
Product Usage Instructions
-
Bluetooth Pairing:
-
Press and hold the button for 2 seconds to enter pairing mode.
-
Activate Bluetooth on your device and select ‘SP-V30’ from the available devices.
-
Once paired successfully, the headphones will flash slowly and your device will show the connected Bluetooth icon.
-
Power On and Power Off:
To power on, press and hold the button for 2 seconds. To power off, do the same. -
Bluetooth Music Play:
-
Select a song on your music player, and press the button to play/pause music.
-
To adjust the volume, short press the button for increase, and hold for 2 seconds to change the next song. Short press to decrease volume, and hold for 2 seconds to change the previous song.
-
Bluetooth Phone Call:
-
Press the button to answer an incoming call, and press again to end the call.
-
To reject a call, press the button when a call is incoming.
-
Active Voice Assistant:
Triple-press the button to activate the voice assistant (Siri/Google Now…). -
TF Card Mode:
Press the ‘M’ button to switch to TF Card Mode, and press again to return to Bluetooth Mode.
Charging
When connected to a charger or USB port, the headphones will indicate a red
light while charging. The indicator will turn off when fully charged.
FCC ID: 2A7J2-BHS6P
FAQ
Q: How do I know when the headphones are fully charged?
A: The indicator light on the headphones will turn off when they are
fully charged.
Description
Package Content
- Bluetooth Headphone
- Charging Cable
- Aux-in Cable
- Quick Guide
Product Specification
- Bluetooth version: V5.3
- Transmit distance: 10 meters
- Battery: 3.7V / 300 mAh
- Input: DC 5V / 500 mA
- Charging Time: 1.5-2 hours
- Playback Time: 35 hours
- Driver Unit: 40mm
- Sensitivity: 105±3 dB
- Impedance: 32 ohm±15%
- Frequency: 20hz-20Khz
Operation
-
Bluetooth Pairing:
-
For the first pairing, press and hold the button for 2 seconds, the headphone will indicate Bule light for 2 seconds and enter into pairing mode, then the light will flash in Red and Blue quickly.
-
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturer’s instructions for instructions on enabling Bluetooth on your device. Once you have activated Bluetooth on your device, select the headphone ‘SP-V30’ from the list of available Bluetooth devices.
-
When the pairing is successful, a Blue light will flash slowly every 9 seconds and your device will show the connected Bluetooth icon.
Note: The pairing function can be different from device to device (check the manual of your device). -
Power on and Power off:
- Power on – Press and hold the button for 2 seconds.
- Power off – Press and hold the button for 2 seconds.
-
Bluetooth music play:
-
Open the music player, select a song to play, press the button to play music, and then press again to pause music.
-
Play music and short press the button to increase the volume, press and hold for 2 seconds to change the next song.
-
Play music and short press the button to decrease the volume, Press and hold for 2 seconds to change the previous song.
-
Bluetooth phone call:
-
Press the button to answer an incoming call, and press the button again to end the call.
-
When the call is coming, press the button for 2 seconds to reject the call.
-
Active Voice Assistant
Triple press to active voice assistant (Siri/Google Now…). -
TF Card Mode
Press the button ‘M’ to turn on TF Card Mode and press it again to return to Bluetooth Mode.
Charging
When the Bluetooth headphone is connected to a charger (or computer USB port) by charging cable, the headphones will indicate a Red light. When the headphone is fully charged, the indicator will be off.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Designed in France and made in China. FCC ID: 2A7J2-BHS6P.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>