EMART ‎EM-GL-2 Waterproof Security Lamp Installation Instructions

June 1, 2024
Emart

EMART ‎EM-GL-2 Waterproof Security Lamp

Safety

These instructions are for your safety. Please read through them thoroughly before installation and retain them for future reference.
All fittings must be installed by a competent person by local regulations.
Check the pack and make sure you have all of the parts listed.

  • Remove all packaging. wrap etc. from the product. Decide on the appropriate location for your product.
    CAUTION: IP44 is guaranteed when the product is properly installed and sealed.
    Always avoid the product being located a corrosive environment.
    Always refer to the installation drawing for the orientation of the product.
    The product must be securely fixed to the mounting surface using the screws and wall plugs supplied.

  • Take care not to drill into any pipes or mains cables beneath the surface during mounting holes preparation.

  • IMPORTANT: The fixing point(s) selected must be capable of supporting the full weight of the light fitting.

  • A wiring diagram is for reference only. Always refer to the terminal marking for wiring. Ensure that all electrical connections are tight and that no loose strands are left out of the terminal block.
    Never put anything on the product or hang anything on any part Of this product.

  • Never use the terminal cables to bear the product weight.
    When the product does not light after installation:

    • Ensure there is no electricity failure
    • Ensure all the connections are secured
  • If you have any doubts about the installation/use of this product. consult a qualified electrician.
    Always disconnect the product from the mains for at least 10 minutes allowing it to cool down before any maintenance or adjustment.
    It is recommended to have a regular schedule of care and maintenance to keep the surface condition well.

Technical Data

  • Supply Voltage: 120 V-. 60 Hz
  • Bulb Type: 2 X12W, 2700K.800LM LED, E26
  • Class II product — Double Insulated — No earth required.
  • IP44 Splash—proof
  • Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local Store for recycling advice.

Package Content

EMART -EM-GL-2-Waterproof-Security-Lamp-BOX

Installation

EMART -EM-GL-2-Waterproof-Security-Lamp-INSTALLLATION

EMART -EM-GL-2-Waterproof-Security-Lamp-
INSTALLLATION.2

EMART -EM-GL-2-Waterproof-Security-Lamp-
INSTALLLATION.3

Dimension

EMART -EM-GL-2-Waterproof-Security-Lamp-DIMENSION

Care

EMART -EM-GL-2-Waterproof-Security-Lamp-CARE

EMART -EM-GL-2-Waterproof-Security-Lamp-CARE.2

Bulb replacement

EMART -EM-GL-2-Waterproof-Security-Lamp-BATTERY

Warranty Period and Conditions

  • At EMART, we devote special attention to selecting high—quality materials and use manufacturing techniques that enable us to create designer and durable product ranges.
  • That is why we offer a 2—year warranty against product manufacturing defects. This product is under warranty for 2 tears as from the date of purchase, for normal, non—professional household use. The warranty shall only apply upon presentation of the till receipt or the invoice on Amazon.
  • The warranty covers product breakdowns and malfunctions under the condition that the product is used by its intended use and subject to installation and maintenance by good practice and the information contained in the user’s manual.
  • This product must be installed so that it may be later removed without damaging it.
  • This contractual warranty does not cover defects and damage caused by the natural wear of parts, or bad weather. flooding. heat releases, freezing, damage caused by water quality (hardness, aggressiveness, corrosion, etc.), the presence of for— eign bodies transported by water or otherwise (sand, fillings, etc.) or the lack of room ventilation, and damages that could be the consequence of improper use, misuse, negligence, accident or maintenance that is defective or dose does not comply with good practice or the information in the user’s manual.
  • The following are also excluded from the warranty: harmful consequences due to the use of accessories and/or non—original equipment manufacturer or improper replacement parts, disassembly, or product modification.

FAQs

What is the power output of the EMART ‎EM-GL-2 Waterproof Security Lamp?

The EMART ‎EM-GL-2 Waterproof Security Lamp has a power output of 20W.

What is the voltage range of the EMART ‎EM-GL-2 Waterproof Security Lamp?

The EMART ‎EM-GL-2 Waterproof Security Lamp operates on a voltage range of 110-240V.

What is the IP rating of the EMART ‎EM-GL-2 Waterproof Security Lamp?

The EMART ‎EM-GL-2 Waterproof Security Lamp has an IP65 rating, making it waterproof and dustproof.

What brightness level does the EMART EM-GL-2 offer?

The EMART EM-GL-2 provides a brightness of 800 lumens, which is ample for most residential outdoor lighting needs.

What is the beam angle of the EMART ‎EM-GL-2 Waterproof Security Lamp?

The EMART ‎EM-GL-2 Waterproof Security Lamp has a beam angle of 120 degrees.

What is the material used in the construction of the EMART ‎EM-GL-2 Waterproof Security Lamp?

The EMART ‎EM-GL-2 Waterproof Security Lamp is made of durable aluminum.

How much does the EMART EM-GL-2 weigh?

The EMART EM-GL-2 weighs approximately 2.36 pounds, making it relatively lightweight for an outdoor lighting fixture.

What is the color temperature of the light from the EMART EM-GL-2?

The light from the EMART EM-GL-2 has a color temperature of 2700 Kelvin, providing a warm light suitable for creating a cozy and welcoming atmosphere.

What is the voltage requirement for the EMART EM-GL-2?

The EMART EM-GL-2 requires a voltage of 120 volts to operate efficiently.

How many light sources does the EMART EM-GL-2 have?

The EMART EM-GL-2 features two light sources, enhancing the overall illumination it provides.

What type of finish does the EMART EM-GL-2 have?

Special features of the EMART EM-GL-2 include its waterproof design and anti- corrosion properties, making it a durable option for outdoor lighting.

What are the dimensions of the EMART EM-GL-2?

The EMART EM-GL-2 measures 15.5 inches in height, 6.7 inches in width, and 7.8 inches in projection.

What is the installation process like for the EMART EM-GL-2?

The installation of the EMART EM-GL-2 is straightforward, making it accessible even for those who are not particularly handy, with two installation styles to choose from according to preference.

What is the warranty coverage for the EMART ‎EM-GL-2 Waterproof Security Lamp?

The EMART ‎EM-GL-2 Waterproof Security Lamp comes with a 1-year manufacturer's warranty.

Video-EMART ‎EM-GL-2 Waterproof Security Lamp

Download this Manual:EMART ‎EM-GL-2 Waterproof Security Lamp Installation Instructions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals