Shenzhen Weipao Electronic Technology HU-001 Bug Zapper Mosquito Killer User Manual
- June 6, 2024
- Shenzhen Weipao Electronic Technology
Table of Contents
Shenzhen Weipao Electronic Technology HU-001 Bug Zapper Mosquito Killer
User Manual
INTRODUCTION
- Thanks for purchasing Our Bug Zapper. please check the condition of the device before use.
- If the device is damaged, do not use it.
- The device is environmentally safe and hygienic, smoke-free and non-toxic.
- It does not include pesticides. The built-in lamp is harmless to people, pets or plants.
- The highly efficient fitting tube emits special ultraviolet waves and attracts insects, the flying insects are trapped and electrocuted by the electrically charged metal grids.
- The device is highly efficient and energy-saving. It is designed for continuous use and is ready to provide you with a long. mosquitofree pastime for many years.
- For optimal performance, please read this manual carefully before use.
ATTENTION
- Do not use in inflammable and/or explosive locales and alike.
- Do not intend to touch internal high voltage grids because electric shock danger. Never put metal objects inside the grid during using.
- Hang or place the appliance out of the reach of children.
- Never remove any fixed part of the appliance to make internal adjustments to avoid electric shock.
- Unplug the appliance before cleaning. Remove insect debris once a week: just pull out the collection tray of electric bug zapper and get rid of them.
- Avoid rough shaking that could damage the tube or components.
WHERE AND HOW TO USE
- The product is Insect Fly Pest Attractant Trap. Bug Zapper for Outdoor, Indoor, Backyard, Patio, Home.(Waterproof rating:IP4X)
- The product has an energy-saving design and soft lighting, So it should not be used in high light conditions. Otherwise, it will affect the destruction of mosquitoes.
- The right methods for using the device are below: for example, keep the lighting off and use device before sleeping, or keep the product in the dark place while working.
APP remote control the bug zapper please read the
“ HOW TO ADD DEVICE TO APP ”
BULB REPLACEMENT
- Disconnect the unit from the electric source.
- Open the lamp by twisting the bottom tray in accordance with the arrows on it.
- Use a screwdriver to remove the screw that holds the plastic gate.
- Now the bulb can be pulled out of its socket.
- Insert the replacement bulb into the socket.
- Mount all parts back
To increase the killing rate, please clean mosquitoes stuck in the grid. Before cleaning, please keep the power off, Use a screwdriver to open the plastic grid case. use soft brush to clean Metal grid.
TECHNICAL INFORMATION
Input voltage: 110V AC, 60Hz
Total Wattage: 20W; Light source: 18W
High voltage metal grid: 4000V
TROUBLESHOOTING
| Problem | Possible Cause | Correctio n |
|---|---|---|
| A. The light is off and there is no high voltage on the grid. |
- There is no electricity.
- The lamp is not installed correctly.
- The burnt out bulb.
|
- Check fuse of circuit breaker. check extension cord.
- check all sockets for proper fit and alignment.
- Replace the light bulb.
B. The light is on, but there is no high voltage on the grid|
- Sorted grids.
- The Transformer is defective.
|
- Examine the grid and clean it using an air blower. Replacement by manufacturer is required.
C. Intermittent or continuous sparking between grid rods|
- The grid is clogged with foreign material.
|
- Clean the grid using an air blower.
D. The light is on, but no longer attracts insects|
- The invisible power of blacklight is reduced due to the age of the lamp.
|
- Replace the bulb. see bulb replacement section in the user manual.
GUARANTEE
- we appreciate your feedback and will do our best to guarantee your satisfaction.
- One-year warranty. Please email us with your order number or contact us on Amazon. Your inquiries will be taken care of as soon as possible.
- This warranty does not cover normal wear of product and damage caused by misoperation of buyers.
HOW TO ADD DEVICE TO APP
Power Key Description:
Short press to power on / off Bug Zapper. Long press for 5 seconds to reset
the Bug Zapper.
Indicator LED Description:
- Indicator LED Light-on means Bug Zapper powers on.
- Indicator LED Light-off means Bug Zapper powers off.
- Indicator LED blink (3 times per second), which means the Bug Zapper at configuration mode (factory mode).
Download APP:
Scan the following QR code or search “Smart Life” in app Scan the following QR code or search “Smart Life” in app
QR Code Add Device (Way 1)
Please scan the QR code with Smart Life to view the network guidance and add device. Follow the instructions on the APP interface to add the device by following.
Add Device (Way 2):
Step 1 : Log in and sign up your “Smart Life” APP;
Step 2 : Confirm the phone is connected to WiFi (ONLY support 2.4G WiFi
network), and click the upper right corner “+” icon in “Smart Life” APP;
Step 3 : Select corresponding “Socket (Wi-Fi)” device icon (The Bug
Zapper is Placed in the Socket Category);
Step 4: Input the router password;
Step 5: Power on the Bug Zapper, and confirm that the Bug Zapper is in
the factory mode (Blinks Rapidly);
Step 6 : Waiting for connection
How to reset the Bug Zapper to the factory mode?
Long press the button for 5 seconds to reset the Bug Zapper. The indicator LED will blink, that means the Bug Zapper already set to factory mode.
How to use the third-party platform for voice control?
Step1: Open the “Me“ menu bar at bottom of the Smart Life APP;
Step2:Select “third-party Voice Services…… More”;
Step3: Click on the third-party service platform you want to access;
Step4: Please follow the instructions on the APP interface to use the voice control;
During the network configuration, is there anything that I should pay attention to?
- If your router is dual-frequency, please set different passwords for 2.4GHz and 5GHz. Or you can turn off the 5GHz. Please disable the dual-frequency function.
- If you still can’t connect the smart device with your phone, please reset the router to factory settings or replace the router and try again.
Warranty Card
Thank you very much for using our products. Anyone who purchases our company’s product is guaranteed for one year, and if there are quality problems during warranty period, our company will repair it for free and provide technical support and accessories for life. If you meet problems when using our products, please feel free to contact us.
Product Model Number: HU-001
Customer Name:
Customer Phone:
Maintenance records:
Tech support :
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.