Bissell 20334 Featherweight Stick Lightweight Bagless Vacuum User Guide
- June 16, 2024
- Bissell
Table of Contents
20334 Featherweight Stick Lightweight Bagless Vacuum
User Guide
20334 Featherweight Stick Lightweight Bagless Vacuum
My FeatherWeight™/Magic Vac®/Easy Vac® 2-in-1 Stick Vacuum has no power |
Support
Model #2033 FeatherWeight/Magic Vac
- Unplug vacuum
- Run hand along entire length of power cord > it should be smooth
- Check plug for damage
- If cord (not smooth or exposed wires) or plug (prongs) are damaged, > Contact Us
- Check to see if outlet is working:
- Test this by plugging in a cell phone charger or small appliance
- If no power to outlet > Plug machine into different outlet in a separate room
- Reset circuit breaker if needed
My FeatherWeight™/Magic Vac®/Easy Vac® 2-in-1 Stick Vacuum has no/low
suction | Support
Model #2033 FeatherWeight/Magic Vac
- Check for suction at the motor duct
- Remove dirt container & filter
- Plug machine in and turn on
- Place hand over opening on machine where pre-motor foam filter sits
- If no suction here, Contact Us
- If there is suction, check the filters
- Dirty filters can cause damage to the motor and eventually no power if not properly maintained
- Clean debris from the pre-motor foam filter
- Remove filter from dirt cup Unlock filters and separate to clean
Shake over waste container to remove debris After heavy use, both filters can
be washed in warm water & mild dish soap
Allow to completely dry (24 – 48 hours) before re-installing
Filters should be replaced if torn or damaged
The filter must be inserted securely into the dirt cup before attaching to the
machine to prevent blowing dust
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>