allen roth FSI 6802B BGLD Bexley 72-in to 144-in Brushed Gold Steel Single Curtain Rod Instruction Manual
- June 13, 2024
- Allen+Roth
Table of Contents
allen roth FSI 6802B BGLD Baxley 72-in to 144-in Brushed Gold Steel Single
Curtain Rod Instruction Manual
ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
Thank you for purchasing this Allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
866-439-9800, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com
*Image is for example only. Appearance of actual product may vary.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Drapery rod level. | Drapery hooks not installed correctly. | Make sure to use |
level (not included) during installation.
Drapery rod hook is loose| Drapery hooks not anchored correctly.| Attach
drapery hooks to wall studs if possible. Use anchors and screws supplied if
you can’t attach to stud. Utilizes les vis et les chenille’s daycare Fournier
sail nest pas possible de les fixer aux montanites.
PREPARATION/PRÉPARATION/PREPARACIÓN
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT/CONFIANT?
Printed in China
CARE AND MAINTENANCE
- Clean with a soft cloth.
- Do not use abrasive cleaning agents, solvents or polishes as they may damage the finish.
PACKAGE CONTENTS
-
A
x3 -
B **
x2**
HARDWARE CONTENTS
-
**AA
x3**
-
**BB
x6**
- **CC
x6
**
INSTALLATION OVERVIEW
-
Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws.
-
Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors.
NOTE
Anchors are not needed for all installation types. -
Attach bracket to wall using screws provided.
NOTE
Repeat steps 1 to 3 for additional brackets. Use level (not included) if necessary. -
Extend telescopic rod slightly. Remove finial from smaller diameter rod section.
-
Slide additional rod over smaller diameter rod.
-
Reattach finial and tighten set screws on brackets to lock rod in place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>