AJAX MultiTransmitter Integration Module User Manual
- June 10, 2024
- ajax
Table of Contents
AJAX MultiTransmitter Integration Module User Manual
https://ajax.systems/support/devices/multitransmitter/
The second life of an old wired alarm
MultiTransmitter opens new markets and allows building modern complex security based on existing wired equipment installed at a facility.
Ajax’s security system users get security control via app, data-rich notifications, and scenarios with this integration module and old third-party wired devices.
An installer can set up the system or device in the PRO app, both while on- site and remotely.
Maximum compatibility with the new firmware
MultiTransmitter allows connecting a wide range of wired sensors. The integration module with firmware version 2.13.0 and higher supports NC, NO, EOL, 2EOL, and 3EOL connection types. EOL resistance detects automatically in the Ajax PRO app.
The device supports EOL’s with resistance from 1 k to 15 k1 with 100 increment. To increase the protection against sabotage, EOL’s with different resistance can be used in one sensor. MultiTransmitter has three independent 12 V power outputs for third-party wired sensors: one for fire sensors and two for the rest devices.
We’ll stop shipping old versions of MultiTransmitter in favour of the new one. New devices will have different packaging with 3EOL icons to avoid confusion. Choose and install the equipment that precisely matches the client’s needs.
Technical specifications
1 — Available on MultiTransmitter with firmware version 2.13.0 and higher.
With firmware version under 2.13.0 available EOL resistance from 1 k to 7.5 k
with 100 increment.
2 — 2EOL/3EOL connection support and EOL resistance from 1 k to 15 k are
available on MultiTransmitter with firmware version 2.13.0 and higher.