LEXON LH88 Orbe Portable LED Lamp with Moving Head User Manual

LEXON LH88 Orbe Portable LED Lamp with Moving Head

Product Information

• Product Name: Orbe Lamp

• Model Number: LH88

• Designer: Nelson Fossey

• Light Source: Integrated LED Module

• Water Resistance: IPX4 Rating (Protected against water
  splashing or sprayed water from any angle)

• Charging: USB-C Connector with Charging Cable (supplied)

• Battery Life: Approximately 48 hours (at 75% brightness)

Product Usage Instructions

1. Unbox the product and ensure all items are present – 1x Orbe Lamp, 1x Charging Cable, 1x User Manual.

2. To charge the lamp, plug the provided charging cable into the charging port of Orbe and the other USB-C end of the cable into any USB-C power adapter.

3. It will take approximately 5 hours to fully charge the lamp.

4. The LED indicator on the lamp will remain off when in use, turn
   solid red while charging, and turn off when fully charged.

5. To set Orbe in cool white and warm white light mode only, press the push button three times quickly. To return to full set lighting mode, repeat the procedure.

6. The lamp head can be adjusted to your desired angle and can be attached to magnetic surfaces using the magnetic surface on the lamp body.

Note: Always refer to the user manual for detailed instructions and safety guidelines.
The product complies with European Union CE Directive, UK Conformity Assessment, and Canada Compliance Statement.

IN THE BOX

• 1x ORBE lamp
• 1x Charging cable
• 1x User manual

The light source of Orbe is an integrated LED module. The lamp is protected against water splashing or sprayed water from any angle (IPX4 rating). The lamp is equipped with a USB-C connector. The supplied charging cable allows you to connect your lamp to any any USB-C power adapter (not supplied). A fully charged lamp stays on for approximately 48 hours (at 75% brightness).

PRODUCT OVERVIEW

1. Lamp head
2. Lamp body
3. Cord
4. Magnetic surface
5. Push button
6. LED indicator (battery & charging status)
7. Type-C charging port

CHARGING INSTRUCTIONS

1. Plug the provided charging cable into the charging port of Orbe.
2. Plug the other USB-C end of the cable into any USB-C power adapter.

It will take approximately 5 hours to fully charge the lamp.

LED information

OPERATING INSTRUCTIONS

• Press the push button once to turn ON the light.
• When turned ON, slowly press the push button to toggle from one light color to another. There are 9 colors options.
• To adjust brightness, press and hold the push button until you have reached the desired intensity.
• To turn OFF the light, wait three seconds after the last press then press again.

Note: If you want to set Orbe in cool white and warm white light mode only, press three times quickly.
To return to full set lighting mode, repeat the procedure.

MAINTENANCE

• Clean carefully with soft cloth.
• Do not use any cleaning materials that contain chemicals.

SAFETY PRECAUTIONS

• Place the lamp on a dry, horizontal surface.
• Orbe is intended for indoor and outdoor use without the adapter. Protect it against water and store inside after use.
• Do not pull the cord that connects the lamp head to the lamp body.
• Charge the device only with the supplied charging cable and a power adapter (not supplied).
• Only charge with an adapter that is compliant with applicable country regulations and international and regional safety standards.
• Other adapters may not meet applicable safety standards and charging with such adapters could pose a risk of death or injury.
• Using damaged cables or chargers, or charging when moisture is present, can cause fire, electric shock, injury, or damage to the case or other property.
• Do not store your device in very hot or cold areas. It is recommended to use your device at room temperatures.
• Do not attempt to service, repair, or disassemble the device or the supplied cable yourself.

PRODUCT SPECIFICATIONS

• Material: ABS
• Weight: 535g / 1.18 lbs
• Dimensions: Lamp head: Ø10 x 9,5 cm / Ø3.94 x 3.74″
• Lamp body: Ø8,5 x 13,7 cm / Ø3,35 x 5,39″
• Cord: 24 cm / 9.45″
• Max. lumen output : 100 lm
• LED lifetime: 30000h
• Color temperature: 3000-7000K
• Water resistance: IPX4 (Protected against splashing or sprayed water from any angle)
• Input port: DC 5V
• Battery type: Li-ion 4000 mAh
• Battery voltage: 3.7V
• Normal usage time: Up to 48h
• Charging system: USB Type-C
• Charging time (USB Type-C): 5 hours
• Operating temperature: 0°C – 45°C
• Warranty: 1 year international

EUROPEAN UNION CE DIRECTIVE

• LEXON hereby declares that the device is in compliance with the essential requirements and other relevant provisions of Directives 2014/30/EU & 2011/65/EU. The original EU declaration of conformity may be found at: https://www.lexon-design.com/assets/certifications-ce-orbe.pdf

UK CONFORMITY ASSESSMENT

• The object of the declaration described above is in conformity with the relevant Union harmonisation legislation.
• The original UK declaration of conformity may be found at: https://www.lexon-design.com/assets/certifications-ukca-orbe.pdf

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

CANADA COMPLIANCE STATEMENT

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-005

• 125, Avenue des Champs-Elysées – 75008 Paris – FRANCE
• All brands or product names are or may be trademarks or their respective owners.
• Pictures and specifications are not contractual. Assembled in China.
• lexon-design.com @lexondesign

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>