TRIDONIC SR MTR Wireless Module Instruction Manual
- June 11, 2024
- TRIDONIC
Table of Contents
TRIDONIC SR MTR Wireless Module
Wireless Module SR MTR
The Wireless Module SR MTR is a Matter-capable DALI controller with an integrated DALI power supply, designed to be used in a luminaire. It has a freely configurable push-button input and can also be safely used in ceiling installations with the optional strain relief set. The device is compliant with Directive 2014/53/EU and Directive UK SI 2017 No. 1206.
Technical Data
- Rated supply voltage: mains frequency 50 / 60 Hz
- Max. mains current: 18 mA
- Typ. power input on stand-by: < 0.5 W
- Input: 1 push-button (mains operated)
- Radio transceiver operating frequencies: Max. output power radio transceiver (E.R.I.P.)1 < +20 dBm
- Output: DALI (compatible)
- Guaranteed output current, DALI2: 50 mA
- Max. output current, DALI: 250 mA
- Max: DALI wiring length
- Turn on time: 2 s
- Operating temperature: -20 … +70 °C
- tc point: 80 °C
- Storage temperature: -25 … +75 °C
- Dimensions: LxWxH 119 x 30 x 21 mm
- Type of protection: IP20
- Protection class: I (II with strain relief)
The Wireless Module SR MTR is a DALI controller with an integrated DALI power
supply. It is designed to be used in a luminaire, but can also be safely used
in ceiling installations with the optional strain relief set. The device has a
freely configurable push-button input and is Matter-capable.
Before installation, ensure that the power supply voltage is rated at mains
frequency 50 / 60 Hz and that the maximum mains current does not exceed 18 mA.
Connect the wires according to the wiring diagram provided in the user manual.
The device output is DALI-compatible with a guaranteed output current of 50 mA
and a maximum output current of 250 mA. The device has a turn-on time of 2
seconds.
The Wireless Module SR MTR has an operating temperature of tc point and a
storage temperature as specified in the technical data. The device has a type
of protection IP20 and protection class I (II with strain relief).
For further information on installation and technical details, refer to the
user manual provided by Tridonic GmbH & Co KG at
www.tridonic.com or contact their customer service
at info@tridonic.com or Tel. +43 5572 395-0.
The Wireless Module SR MTR is a Matter-capable DALI controller with a freely
configurable push-button input and has an integrated DALI power supply,
therefore no external DALI power supply is necessary.
The device is designed to be used in a luminaire, but with the optional strain
relief set it can be also safely used in e.g. ceiling installations.
Installation Instructions
Wiring diagram DALI
Wiring diagram as sensor module for wireless switching
Wire preparation
Make sure that the mains voltage is switched off when making any connections.
Use 0.2 – 1.5 mm² solid or stranded electrical wires for the mains supply /
push-button / DALI terminals.
Strip the wire 8.5 – 9.5 mm from the end.
- Make sure to connect the input and outputs correctly. Mains input connector is marked with letters L and N.
- Hereby, Tridonic declares that the radio equipment type Wireless Module SR MTR is in compliance with Directive 2014/53/EU.
- Hereby, Tridonic declares that the radio equipment type Wireless Module SR MTR is in compliance with Directive UK SI 2017 No. 1206.
- The full text is available at the following internet address: https://trid.help/en28004484cer
Safety instructions
- Installation of this device may only be carried out by specialist staff who have provided proof of their skills.
- Switch off the mains supply before handling the device.
- Observe the relevant safety and accident prevention regulations
Areas of application
The device may only
- be used for the applications specified.
- for safe installation in dry, clean environment.
- be installed in such a way that access is only possible using a tool.
CONTACT
12/22-15015379-0 We reserve the right to make technical changes without prior
notice.
Tridonic GmbH & Co KG, www.tridonic.com,
info@tridonic.com, Tel. +43 5572 395-0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>