HAY Table Cord Set Instruction Manual
- October 30, 2023
- HAY
Table of Contents
HAY Table Cord Set
Product Information
Table Cord Set
The Table Cord Set is a lighting product designed by HAY. It is equipped with
an E27 bulb fitting and is recommended to be usedwith a LED bulb. The product
has a power consumption of 15W and produces warm white light. The use of
incorrect bulbs is not
recommended and may cause accidents, injuries, or damages for whichHAY will
not accept any responsibility.
Technical Data
- Fitting Type: LED E27
- Power (W): 15W
- Colour Temperature: Warm white
Product Care and Maintenance
The Table Cord Set can be cleaned with a soft damp cloth and mild detergent, or a dry microfibre cloth. Avoid using alcohol orany other solvents, as well as abrasive or rough sponges. Before cleaning the product, make sure to turn off the power supply. If the external flexible cable or cord of this luminaire is damaged, it should be replaced exclusively by a qualified electrician toavoid electrical hazards. This product is designed for indoor use only.
Usage Instructions
- Turn off the power supply to the circuit before installing the product.
- Unscrew and remove the lower shade ring from the E27 bulb holder of the Table Cord Set.
- Place the shade on the bulb holder and replace the shade ring to fix it in place.
- Carefully screw a bulb into the bulb holder, ensuring that it s not too tight. Use a standard E27 washer fitting in conjunction with the cord set.
Please note that shades are sold separately. For optimal maintenance of your HAY product, refer to the Care & Maintenance guide provided either by scanning the QR code orvisiting hay.dk/downloads.
For any further questions or concerns, contact HAY through their website or email.
GENERAL INFORMATION
TECHNICAL DATA
- This product is fitted with an E27 bulb fitting.
- HAY recommends using this product with a LED bulb.
- FITTING TYPE | LED E27
- POWER (W) | 15W
- COLOUR TEMPERATURE | Warm white
- HAY will not accept any responsibility for any accidents, injuries or damages that occur due to the use of incorrect bulbs.
ATTENTION
Ensure that the power supply to the circuit has clearly been turned OFF before
installing the product. In some countries, electrical installation must be
carried out by authorised electricians/ contractors; please check with your
local authority for guidance.
The product must not be modified in any way. HAY accepts no responsibility for
any products that have been modified or tampered with. If the external
flexible cable or cord of this luminaire is damaged, it should be exclusively
replaced by a qualified electrician in order to avoid an electrical hazard.
This lamp is designed for indoor use only.
CARE AND MAINTENANCE
The product can be cleaned with a soft damp cloth and mild detergent, or a dry
microfibre cloth. Do not use alcohol or any other solvents to clean the
product and avoid using abrasive or rough sponges. Ensure that the power
supply has been turned OFF before cleaningthe product
PARTS
- Unscrew and remove the lower shade ring from the E27 bulb holder of the table cord set.
- Place the shade on the bulb holder and replace the shade ring to fix it in place. Carefully screw a bulb into the bulb holder, ensuring that it is not too tight. Please note that shades are sold separately. This cord set should be used in conjunction with a standard E27 washer fitting as shown below.
CARE & MAINTENANCE
Our Care & Maintenance offers guidance for optimal maintenance of your HAY product. It includes advice and instructions on cleaning and caring for specific materials to prolong the life of your lighting.
Please find our Care & Maintenance guide by scanning the QR code You can find more relevant information on Table Cord Set by scanning the QR code
- You can also find the same information here hay.dk/downloads
- Havnen 1 8700 Horsens Denmark
- +45 4282 0282
- [email protected]
- www.hay.com
References
- HAY.dk – latest products, designer news and retailer info
- HAY - Danish-Inspired Furniture + Accessories for Modern Living