SIMIX B12456 Multi Surface Ceramic Clearcoat Pure Air Coating Instructions
- June 2, 2024
- SIMIX
Table of Contents
SIMIX B12456 Multi Surface Ceramic Clearcoat Pure Air Coating
You will need:
- Mop/mop bucket
- Laundered flat-looped microfiber mop
- Red and green pads
- 2-gallon pump-up sprayer
- SIMIX Multi-Surface Cleaner & Degreaser
- SIMIX Multi-Surface Ceramic Clearcoat
- Distilled or RO water
Clean, Restore and Coat LVT and LVP Flooring
INSTRUCTIONS
The floor must be completely stripped.
- Step 1: If any coating is present strip floor of all dirt, grime and or old coatings.
- Step 2: Now rinse floor well with 1 small scoop of SIMIX Multi-Surface Peroxide Cleaner & Degreaser to 1 gallon of warm water. Let the floor dry.
Apply SIMIX Multi-Surface Ceramic Clearcoat
- Step 1: Mix SIMIX Multi-Surface Ceramic Clearcoat 4 parts water with 1 part coating in the pump-up sprayer. (use distilled or RO water)
- Step 2: Apply coating and spread using a laundered flat looped microfiber mop. Apply thin coats. Do not allow the coating to puddle. Each coat will take 5 to 10 minutes to dry.
- Step 3: Apply 4 coats. After 4th coat is dry wait 30 minutes before replacing all the items on the floor. Can add 4–6 total coats for added protection.
SIMIX I KENOSHA, WISCONSIN
info@simixusa.com
simixusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>