SuperLightingLED WR01RF Smart Wall Remote Controller User Manual

SuperLightingLED WR01RF Smart Wall Remote Controller

Features

We adopt a high-precision capacitive touch screen IC. The touch screen is very Stable and Sensitive; 2.4GHz high RF wireless control with long distance controlling, low power consumption, and high speed transmitting rate. This wall remote widely works on our smart LED Lighting, LED controllers, etc.

Parameters

• Working Voltage: 3V(2*AAA Battery)
• Standby Power Consumption: 20uA
• Transmitting Power: 6dBm
• Transmission Frequency: 2.4GHz
• Working Temp.: -20-40°C
• Control Distance: 30m
• Size: 86″86*16.5mm

Keys Function

Remark: When touching the button, the LED pilot lamp will flash once with a different sound. (Touching slider with no sound).

WR01RF: 4-Zona RGB &RGBW&RGBCCT White Wall Remote

• Touch the color slider, and choose the color you want.
• Zone ON&
• Link/Unlink Button
• Zone OFF&
• Night Light Mode Button
• Control RGBCCT LED, Press the W button first and adjust color

Temperaturelote.

• Control RGBW LED, not working on color temperature adjustment.
• Control RGB LED, Press the W button first and adjust color

Temperaturelote
Note: The color temperature value is not very accurate, because it is RGB color mixing to adjust the color temperature. Under color light mode, change color saturation.

• Touch the dimming slider to change the brightness.
• ALL ON: Touch to tum on all linked lights.
• Long press over 5 seconds to tum ON the pilot sound.
• Zona(1-4) ON: Touch zone ON, tum on zone-linked lights.
• ALL OFF: Touch to tum off all linked lights.
• Long press 5 seconds to tum OFF the pilot sound.
• Zona(1-4) OFF: Touch zone OFF, tum off zone-linked lights.
• Long press Zone(1-4) OFF to get the night light mode.
• Touch the white button to white light mode.
• Switching dynamic modes.
• Accelerate the speed on the current dynamic mode. When the light is not on dynamic modes, long press this button to set up the “Do Not Disturb” function(Mainly for C01RF-C05RF controllers).
• Slow the speed on the current dynamic mode. When the light is not on dynamic modes, long press this button to delete the “Do Not Disturb” function(Mainly for C01RF-C05RF controllers).
• When the light is ON, press ·sos Delay OFF”, the light will be OFF automatically after 60 seconds. Note: When setting up the “60S Delay OFF” function, the other buttons not working during the 60 seconds; users can press the “605 Delay OFF” button to delete this function, then other buttons can work again.

WR02RF: 4-Zona DIM&Dual White Wall Ramote(Brightness Dimming and CCT Adjust).

• Touch the slider to adjust the color temperature.
  Note: when you control single-color lights, the slider not working.

• Touch the dimming slider to change the brightness.

• ALL ON: Touch to turn on all linked lights. Long press over 5 seconds to turn ON the pilot sound.(The pilot sound is opened by default).

• Zone(1-4) ON: Touch zone ON, and turn on zone-linked lights.

• ALL OFF: Touch to tum off all linked lights.

• Long press 5 seconds to tum OFF the pilot sound. ZOna(1-4) OFF: Touch zone OFF, tum off zone-linked lights. Long press Zone(1-4) OFF to get the night light mode.

• Switching dynamic modes.

• Accelerate the speed on the current dynamic mode. When the light is not on dynamic modes, long press this button to set up the “Do Not Disturb” function(Mainly for C01 RF-C05RF controllers).

• Slow the speed on the current dynamic mode. When the light is not on dynamic modes, long press this button to delete the “Do Not Disturb” function(Mainly for C01 RF-C05RF controllers).

• When the light is ON, press “SOS Delay OFF”, the light will be OFF automatically after 60 seconds.
  Note: When set up the “605 Delay OFF” function, the other buttons not working during the 60 seconds; uses can press the “60S Delay OFF” button to delete this function, then other buttons can works again.

Link/ Unlink ( WR01 RF &WR02RF)

Linking Instructions

1. Switch off the light, and after 10 seconds switch on again.
2. When the light is on, short press any zone of “ ” 3 times within 3 seconds.
3. The light blinking 3 times slowly means the linking is done successfully.

If the light not blink slowly, the linking failed, pis switch off the light again and follow the above steps again.

Unllnklng Instructions

1. Switch off the light, after 10 seconds switch on again.
2. When the light on, short press ” ” 5 times within 3 seconds.
3. The light blinking 10 times quickly, means the unlinking is successful.

Installation

1. Tear out the back tape.
2. Stick the holder on the position where you want.
3. Install 2*AAA battery.
4. Put the rotating switch on the front of the holder.

Attention

1. Please check the battery is installed correctly before power on.
2. When installing, please handle it with care to avoid breaking the glass panel.
3. Please do not use lighting fixtures around the mental area and high magnetic field, otherwise, it will badly affect the control distance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>