AXAGON CRE-SMP1C Smart Card Single lot Card Reader Instruction Manual
- June 11, 2024
- AXAGON
Table of Contents
AXAGON CRE-SMP1C Smart Card Single lot Card Reader
INSTRUCTION FOR USE
- Turn on the computer.
- Connect the reader to the computer USB port.
- An automatic installation will take place. No external drivers are required.
- The Smart Card Reader is ready.
- Insert the Smart Card into the reader.
- Check the successful installation in the Device Manager
INFO:
To use the reader, it is necessary to install suitable software according to
the way the inserted Smart Card is used.
PRODUCT SUPPORT LINK
http://axagon.eu/produkty/cre-smp1c#supportLinkGoal
© 2022 AXAGON Vyrobce / Manufacturer: Real s.r.o. – Zelezná 5, 619 00 Brno, Czech Republic All rights reserved. All text and pictorial materials contained in this document are protected by Copyright Act. All marks indicated here are the registered trademarks of their appropriate owners. Specifications are subject to change without prior notice. Made in CHINA for Axagon.
Using Device Manager
to check correct installation in Windows 10
only devices added to the Device Manager during card installation are
displayed
SUPPORTED SMART CARDS
- CARD WITH A VISIBLE CHIP – SUPPORTED
- CARD WITHOUT A VISIBLE CHIP – NOT SUPPORTED
HOW TO INSERT CARDS & LED INDICATION
SMART LED INDICATION
- Lighting – card reader connected, card inserted
- Blinking – data transfer
CONTACT SMART CARDS
- ATM
- CAC
- ID
- IC
- SIS
TECHNICAL SPECIFICATIONS
INPUT:
- USB 2.0 USB 1.1
- USB 2.0 CCID protocol
- Built-in USB 2.0 type C male connector
SMART CARD SLOT:
- supports Contact Smart Cards for ATM / CAC /ID / IC / SIS
- Contact Smart Cards ISO 7816, class A, Band C (5V, 3V and 1.8V)
- Standards ISO 7816, EMV 4.1
- Protocols T =0 and T = 1, 12(
- SLE 4432/42 (5= 10), SLE 4418/28 (5=9)
- PC Smart Card standard PC/SC 2.0
- FIPS 201
- Microsoft Smart Card for Windows
- MicrosoftWHQL USB Smart Card Reader
- l2C cards SLE4418, SLE4428, SLE4432, SLE4442, SLE4436, SLE5536, SLE6636, AT88SC1608, AT 45D041
- Smart Card interface speed 420 Kbps (depend on card)
OTHER FEATURES:
- Plug and Play
- Hot Plug
- Hot Swap
- USB bus power
- AUTO install
- Sleep mode support
0S SUPPORTED
- Windows: XP /Vista /7 / 8.1 / 10 / 11 & later Server: 2003 / 2008 / 2012 / 2016 / 2019 I 2022 & later 32 & 64bit versions supported
- Mac OS X 1 O.x & later
- Linux 2.4.x & later
- Android 8 & later
TECHNICAL SUPPORT
More information, FAQs, manuals and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: support@axagon.cz.
DISPOSAL
At the end of its service life, do not throw the product into household
waste; take it to a collection point for electrical equipment recycling. For
information about collection and recycling programmes in your country, contact
your local authorities or the retailer who sold you the product.
EU declaration of conformity
The device complies with the harmonisation legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer. Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer. Do not use the product in humid or explosive environments and near flammable substances. www.axagon.eu