ET2 E42104 Gravity Medium Outdoor LED Sconce User Guide

June 11, 2024
ET2

Gravity Medium Outdoor LED Sconce
User Guide 

ET2 E42104 Gravity Medium Outdoor LED Sconce _

E42104 Gravity Medium Outdoor LED Sconce

ITEM NUMBER: E42104
DESCRIPTION: Gravity Medium Outdoor LED Sconce
PLEASE CONSULT AN ELECTRICIAN BEFORE INSTALLATION
LAMPING : LED Integrated 17.0W Vin put: 120-277V
MADE IN CHINA I HECHO EN CHINA I FABRIQUE EN CHINE

Before Getting Started

Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of small children. Choose a clean, level, spacious assembly area.
Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
*Risk of suffocation!
Keep any packaging materials away from children.

Lamp Care Instructions

Carefully read through the instruction sheet before assembly and using the product.
Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
WARNING: Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur.
Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
Do not plug the product in if cord is torn or frayed.

Cleaning & Maintenance

On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent.
DO not use abrasive cleaner.
Periodically (every 90 days) make sure that the screws are fully tightened. Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Before Getting started , ensure the package contains the following components

ET2 E42104 Gravity Medium Outdoor LED Sconce _ Fig| ET2 E42104 Gravity Medium Outdoor LED Sconce _ Fig
1
---|---

CRITICAL INSTRUCTION

Dimmer Compatibility
This fixture must be installed with compatible dimmer types only. Improper wiring of fixture and/or use of incorrect dimmers will cause catastrophic failure and void the warranty.

ET2 E42104 Gravity Medium Outdoor LED Sconce _ Fig 2

DO NOT ATTEMPT TO CUT FACTORY CONNECTIONS WITHOUT QUALIFIED KNOWLEDGE,MODIFICATIONS MADE TO THIS PRODUCTWITHOUT THE CONSENT OF THE MANUFACTURER WILL VOID WARRNTY.
FOR OPTIMAL USE
THIS FIXTURE HAS BEEN TESTED TO WORK WITH THE BELOW DIMMERS Lutron Diva DVCL- 153P DVELV-300P
IMPORTANT
Make sure that your dimmable LED fixture a paired with the correct (flame type
Must be installed by a licensed electrician with knowledge of electronic lighting systems

2022 MAXIM LIGHTING GROUP

Documents / Resources

| ET2 E42104 Gravity Medium Outdoor LED Sconce [pdf] User Guide
E42104 Gravity Medium Outdoor LED Sconce, E42104, Gravity Medium Outdoor LED Sconce, Medium Outdoor LED Sconce, Outdoor LED Sconce, LED Sconce, Sconce
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ET2 User Manuals

Related Manuals