CAL-ROYAL N-77CVR Concealed Vertical Rod Exit Device Instruction Manual
- June 11, 2024
- CAL-ROYAL
Table of Contents
INSTALLATION INSTRUCTION
N-F77CVR CONCEALED VERTICAL ROD
EXIT DEVICE
N-77CVR Concealed Vertical Rod Exit Device
TO CHANGE BOTTOM LATCH FOR BOTTOM STRIKE
1.Device factory pre-set.| 2-1.Unscrew and remove screw and L-shaped bracket.
2-2. The L-shaped bracket moves backward.
2-1.Unscrew and remove screw and L-shaped bracket. 2-2. The L-shaped bracket
moves backward.| 2-1.Unscrew and remove screw and L-shaped bracket. 2-2. The
L-shaped bracket moves backward.| 4. Change Done.
---|---|---|---
| | |
INSTALL INNER CHASSIS & TOP LATCH
INSTALL BOTTOM LATCH
(Skip this step if less Bottom Rod)
INSTALL TOP & BOTTOMSTRIKE
(Please Follow TEMPLATE)
TO CHANGE HAND OF N-F77CVR
EXIT DEVICE
1. LHR| 2-1. Remove chassis pin & main slide & tube.
2-2. Remove lift lever & lift lever pin.
2-3. Rotate 180° main slide & lift lever
---|---
|
3-1. Reassemble lift lever at opposite side, as shown.
3-2. Replace main slide and chassis pin and lift lever pin. and fixed screw.|
1. RHR Done.
|