ET2 E24774-133BK Sonata 48 Inch LED Pendant Installation Guide
- June 11, 2024
- ET2
Table of Contents
ET2 E24774-133BK Sonata 48 Inch LED Pendant
Product Information
- Item Number: E24774-133BK
- Description: Sonata 48 LED Pendant
- Lamping: LED Integrated 54W
- Vimput: 120V
- Manufactured in China
Product Usage Instructions
- Before getting started, carefully read the instructions prior to assembling the product.
- When opening the package, use a sharp tool like a cutter knife, and be careful not to damage the components inside.
- Remove all packaging materials carefully and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item. Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
- Disconnect from power source before assembling or cleaning. There is a risk of shock.
- Wires need to be connected to driver found in canopy and should not be connected directly to the power source or a short may occur.
- Do not cut factory connections unless instructed by the manufacturer. Modifications made to this product without the consent of the manufacturer will void warranty.
- Do not plug the product in if cord is torn or frayed.
- Clean with soft cloth and mild detergent. Do not use abrasive cleaner.
- Periodically (every 90 days) ensure that the screws are fully tightened. Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Low Voltage LED Lighting Instructions
-
Carefully read through the instruction sheet before assembly and using the product. Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
-
WARNING: Wires need to be connected to the driver found in canopy and should not be connected directly to power source or a short may occur.
-
Do not cut factory connections unless
instructed by the manufacturer -
Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
- Clean with soft cloth and a mild detergent.
- DO not use abrasive cleaner. Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
Comtents
Before getting,started,ensure the package contains the following
components.
WIRING DIAGRAM(ONLY FOR REFERENCE)
DO NOT: ATTEMPT TO CUT FACTORY CONNECTIONS WITHOUT QUALIFIED KNOWLEDGE.MODIFICATIONS MADE TO THIS PRODUCT WITHOUT THE CONSENT OF THE MANUFACTURER WILL VOID THE WARRANTY.
SCHEMATIC: FOR GENERAL REFERENCE ONLY if fixture does not light, reverse polarity.
FOR OPTIMAL USE:
- Lutron:
- DVCL-153P
- NTLV-603P
- GT-250M
- MACL-153M
- PD-6WCL
- DSLO6
- DV-600P
- RRD-10ND
- Leviton:
- IPM10
- 6674
- AWSMT-EB
- SEND PRODUCT INQUIRIES TO INFO@ET2ONLINE.COM
- Must be installed by a licensed electrician with knowledge of electronic lighting systems
- ITEM NUMBER: E24774-133BK
- DESCRIPTION: Sonata 48″ LED Pendant
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>