CAL-ROYAL N-98CVR Concealed Vertical ROD Exit Device Instruction Manual
- June 11, 2024
- CAL-ROYAL
Table of Contents
N-98CVR Concealed Vertical ROD Exit Device
Instruction Manual
N-98CVR Concealed Vertical ROD Exit Device
TO CHANGE BOTTOM LATCH FOR BOTTOM STRIKE
-
Device factory pre-set.
-
-1.Unscrew and remove screw and L-shaped bracket. 2-2. The L-shaped bracket moves backward.
-
Move the L-shaped bracket back to the (A) screw hole and install and lock it.
-
Change Done.
INSTALL INNER CHASSIS & TOP LATCH
INSTALL BOTTOM LATCH (Skip this step if less Bottom Rod)
Attached Rod to Bottom latch
INSTALL TOP & BOTTOMSTRIKE (Please Follow TEMPLATE)
TO CHANGE HAND OF N-98CVR EXIT DEVICE
1. LHR
| 2-1. Remove chassis pin & main slide & tube.
2-2. Remove lift lever & lift lever pin.
2-3. Rotate 180° main slide & lift lever
---|---
3-1. Reassemble lift lever at opposite side, as shown.
3-2. Replace main slide and chassis pin and lift lever pin. and fixed screw.
| 1. RHR Done.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>