AJAX AX-RELAY Relay User Manual
- June 11, 2024
- ajax
Table of Contents
AJAX AX-RELAY Relay
Introduction
Relay is a wireless, low-voltage relay featuring potential-free (dry)
contacts. Use
Relay to remotely switch on/off appliances powered by a 7–24 V DC source.
Relay can operate both in pulse and bistable mode. The device communicates
with a hub via Jeweller radio protocol. In
the line of sight, the communication distance is up to 1,000 m.
Regardless of the type of electrical circuit, only a qualified electrician should install Relay!
The Relay contacts are not galvanically connected to the device itself, so they can be connected to the input control circuits of various equipment to imitate a button, toggle switch, etc.
Relay is compatible only with Ajax hubs and does not support connecting via uartBridge or ocBridge Plus.
Use scenarios to program actions of automation devices (Relay, WallSwitch or Socket) in response to an alarm, Button press or schedule. A scenario can be created remotely in the Ajax app.
How to create and configure a scenario in the Ajax security system
The Ajax security system can be connected to the central monitoring station of a security company.
Functional Elements
- Antenna
- Power supply terminal block
- Contacts terminal block
- Function button
- Light indicator
- PS IN terminals — “+” and “-” contact terminals, 7-24 V DC input power supply.
- Relay terminals — output potential-free terminals.
Operating Principle
Do not connect Relay power supply input terminals to a voltage exceeding 36 V or alternate current sources. It creates a risk of fire and will damage the device!
Regardless of the type of electrical circuit, only a qualified electrician should install Relay!
Relay is powered by a 7–24 V DC source. The recommended voltage values are 12 V, and 24 V. Use the Ajax Security System app to connect and set up Relay.
Relay features dry (potential-free) contacts. The contacts are not connected to the device galvanically so that Relay can imitate a button, switch, etc. in electrical circuits of various voltages (sirens, electrical valves, electromagnetic locks). The miniature body makes it possible to install Relay inside a junction box, switchboard, or a switch.
Relay closes and opens the contacts by user command from the app or automatically by scenario.
Relay operation modes
- Bistable — Relay opens or closes contact and remains in this state.
- Pulse — Relay opens or closes contacts for a pre-set time (from 0.5 to 255 seconds) then switches back to the initial state.
Connecting to the hub
Before connecting the device:
- Switch on the hub and check its Internet connection (the logo glows white or green).
- Install the Ajax app. Create the account, add the hub to the app, and create at least one room.
- Make sure that the hub is not armed, and it does not update by checking its status in the Ajax app.
- Connect Relay to 12 or 24 V power supply.
Only users with administrator rights can add a device to the app
To pair Relay with a hub:
-
Click Add device in the Ajax app.
-
Name the device, scan it, or enter the QR code manually (located on the case and packaging), select the room.
-
Click Add — the countdown will begin.
-
Press the functional button.
For detection and pairing to occur, the device should be located in the coverage area of the hub’s wireless network (at the same object). The connection request is transmitted only at the moment of switching on the device.
If the device failed to pair, wait 30 seconds and then retry. Relay will appear in the list of hub devices.
The device statuses update depends on the ping interval set in the hub
settings.
The default value is 36 seconds.
When switching on for the first time, Relay contacts are open! When deleting Relay from the system, contacts open!
States
- Devices
- Relay
Parameter| Value
---|---
Jeweller Signal Strength| Signal strength between the hub and Relay
Connection| Connection status between the hub and the relay
Routed Through ReX| Displays the status of using the ReX range extender
Active| State of the relay contacts (closed / open)
Voltage| The current input voltage
Temporary Deactivation| Displays the status of the device: active or completely disabled by the user
Firmware| Device firmware version
Device ID| Device identifier
Settings
- Devices
- Relay
- Settings
Settings| Value
---|---
First field| Device name, can be edited
Room| Selecting the virtual room to which the device is assigned
Relay Mode| Choosing the relay operation mode Pulse Bistable
Contact State| Normal contact state
Normally Closed Normally Open
Pulse duration, sec| Selecting the pulse duration in the pulse mode: From 0.5
to 255 seconds
Scenarios| Opens the menu for creating and configuring scenarios Learn
more
Jeweller Signal Strength Test| Switches the relay to the signal strength test
mode
User Guide| Opens the Relay User Manual
Temporary Deactivation| Allows a user to deactivate the device without
removing it from the system. The device will not execute system commands and
participate in automation scenarios. All notifications and alarms will be
ignored
| Please note that deactivated device will save it’s current state (active
or inactive)
---|---
Unpair Device| Disconnect Relay from a hub and delete its settings
Voltage protection — the contact will open when the voltage exceeds the limits of 6.5–36.5 V.
Temperature protection — the contact will be opened when the temperature threshold of 85°С inside Relay is reached.
Indication
The Relay light indicator can light green depending on the device status.
When not paired with the hub, the light indicator blinks periodically. When
the functional button is pressed, the light indicator lights up.
Functionality Testing
The Ajax security system allows conducting tests for checking the functionality of connected devices.
The tests do not start immediately but within a period of 36 seconds when using default settings. The test time start depends on the settings of the detector ping interval (the Jeweller menu in the hub settings).
Installation of the Device
Regardless of the type of electrical circuit, only a qualified electrician should install Relay.
The communication range with the hub in the line of sight is up to 1,000
meters.
Take this into account when choosing the location for Relay.
If the device has a low or unstable signal strength, use the ReX radio signal
range extender.
Installation process:
- De-energize the cable to which Relay will be connected.
- Connect the grid wire to the Relay terminals according to the following scheme:
When installing Relay in the box, lead out the antenna and place it under the plastic frame of the socket. The bigger the distance between the antenna and metal structures, the lower the risk of interfering (and impairment) of the radio signal.
Do not shorten the antenna! Its length is optimal for operation within the used radio frequency range!
During the installation and operation of Relay, follow the general electrical safety rules and the requirements of electrical safety regulatory acts.
It is strictly forbidden to disassemble the device. Do not use the device with damaged power cables.
Do not install the relay:
- Outdoors.
- In metal wiring boxes and electrical panels.
- In places with temperature and humidity exceeding the permissible limits.
- Closer than 1 m to a hub.
Maintenance
The device does not require maintenance.
Tech Specs
| Actuating element | Electromagnetic relay |
|---|---|
| The service life of the relay | 200,000 switchings |
| Supply voltage range | 7 – 24 V (DC only) |
| Voltage protection | Yes, min — 6.5 V, max — 36.5 V |
| Maximum load current* | 5 A at 36 V DC, 13 A at 230 V AC |
| Operating modes | Pulse and bistable |
| Pulse duration | 0.5 to 255 seconds |
| Maximum current protection | No |
| Parameter control | Yes (voltage) |
| Device energy consumption | Less than 1 W |
| Frequency band | 868.0 – 868.6 MHz or 868.7 – 869.2 MHz depending on the region |
of sale
Compatibility| Operates only with all Ajax hubs , and range extenders
Effective radiated power| 3.99 mW (6.01 dBm), limit — 25 mW
Modulation of the radio signal| GFSK
Maximum distance between the device and the Hub|
Up to 1000 m (any obstacles absent)
Communication ping with the receiver| 12 – 300 sec (36 sec default)
Shell protection rating| IP20
Operating temperature range| From 0°С to +64°С (ambient)
Max. temperature protection| Yes, over 65°C at the place of installation or
over 85°C inside the Relay
Operating humidity| Up to 75%
Dimensions| 39 × 33 × 18 mm
Weight| 25 g
If using inductive or capacitive load, the maximum commutated current decreases to 3 A at 24 V DC and to 8 A at 230 V AC!
Complete Set
- Relay
- Connecting wires — 2 pcs
- Quick Start Guide
Warranty
Warranty for the “AJAX SYSTEMS MANUFACTURING” LIMITED LIABILITY COMPANY
products is valid for 2 years after the purchase.
If the device does not work correctly, you should first contact the support
service — in half of the cases, technical issues can be solved remotely!
The full text of the warranty
User Agreement
Technical support: support@ajax.systems
References
- End user agreement - Ajax Systems
- All Ajax security system devices and detectors
- All Ajax security system devices and detectors
- Current product lines of the Ajax security system
- Relay — Low current remote control relay with dry contact
- uartBridge — Module for Ajax devices integration with third-party wireless alarms systems
- Warranty - Ajax Systems
- How to create and configure a scenario in the Ajax system | Ajax Systems Support
- What is Jeweller Signal Strength Test | Ajax Systems Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>